RE: Belkin Regulator Pro UPS (with USB)

["Barry Johnson" <redhat baj us>]

I think I may have the solution, ps -ef|grep upsd , if upsd isn't
running it has nothing to connect to.  I just did a soft link between
etc/init.d/rc3.d/S99bulldog and /usr/local/S99bulldog to make sure it
always comes up.  If it isn't running ./upsd will also work then try
./monitor.  Hope that helps

Barry Johnson

-----Original Message-----
From: redhat-list-admin redhat com [mailto:redhat-list-admin redhat com]
On Behalf Of Richard S. Crawford
Sent: Wednesday, February 04, 2004 9:58 AM
To: redhat-list redhat com
Subject: RE: Belkin Regulator Pro UPS (with USB)


On Wed, 2004-02-04 at 06:46, Barry Johnson wrote (quoting me):

> > Anyone out there using one of these on their RH 8 box?

> I'm using one but it is a serial version, what problems are you 
> having??

It's powered up and the battery goes through the self-check fine.  When
I try to launch the monitor software, however, it displays nothing about
the UPS device.  It says that it has established a connection from the
computer to the UPS, but no information about the device -- voltage or
anything shows up -- and it doesn't show anything about the host either.

The computer which is hooked up to the UPS is set up as a master.

I'm not sure if I've missed a step or if there is a configuration
problem.  I have it set to talk to /dev/ttyUSB0.


-- 
Slainte,
Richard S. Crawford
AIM: Buffalo2K / Y!: rscrawford / ICQ: 11640404
Howard Dean for America: http://www.deanforamerica.com
http://www.mossroot.com http://www.stonegoose.com "It is only with our
heart that we can see clearly.  What is essential is invisible to the
eye."  --Antoine de Saint Exupery


-- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request redhat com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list