Re: question.. not sure where to post..!!

[Nathaniel Hall <halln otc edu>]

The blade servers a separate server.  I suppose you could cluster them 
using software, they are actually separate servers.  We use Dell blades 
at the time.  The shared chassis has a built in KVM and Gig switch.  
Each blade that we order has two processors, two gigs of ram, two 145 
gig SCSI drives raided together and, through the use of the chassis, two 
gig nics.  A USB 1.1 floppy and CD-ROM is used for installation (not at 
the same time).  6 blades can fit into each 3 U chassis and each chassis 
( on the cheaper end) uses 120 volt power.

HP has a similar product, but the chassis is 6 U and uses 240 volt power 
and can usually have 20 blades per enclosure.  The main reason for not 
going with HP, other than power, was the hard drive.  Instead of using 
normal SCSI drives, the model we looked at used IDE laptop drives.  The 
laptop drives spin much slower than other drives, usually 5400 RPMs.

Hope that helped.

Nathaniel Hall, GSEC
Intrusion Detection and Firewall Technician
Ozarks Technical Community College -- Office of Computer Networking

halln otc edu
417-799-0552



Jason Staudenmayer wrote:

> > -----Original Message-----
> > From: Dave Ihnat [mailto:ignatz dminet com] 
> > Sent: Thursday, October 28, 2004 9:34 AM
> > To: General Red Hat Linux discussion list
> > Subject: Re: question.. not sure where to post..!!
> >
> >
> > On Thu, Oct 28, 2004 at 09:14:09AM -0400, Jason Staudenmayer wrote:
> >    
> >
> > > I'm thinking the same thing. You could just get a blade box 
> > >      
> > but I've never
> >    
> >
> > > played with one, so I'm not quit sure of how they function. 
> > >      
> > I would imagine
> >    
> >
> > > it's a cluster situation.
> > >      
> > The biggest problem with blades today is that they're still 
> > proprietary.  I
> > won't touch 'em until there's enough of a standard that 
> > you're not locked
> > into one manufacturer once you select a blade system.
> > --
> > 	Dave Ihnat
> > 	ignatz dminet com
> >
> > --
> > redhat-list mailing list
> > unsubscribe mailto:redhat-list-request redhat com?subject=unsubscribe
> > https://www.redhat.com/mailman/listinfo/redhat-list
> >
> >    
>
> Are they a cluster or can they act as separate machines? (just for my own
> knowledge).
>
>