Re: Problems with X system

[Alex Pankin <pankin fusion physics lehigh edu>]

My monitor is alive again!!! It revived after just another computer 
restart. It's strange because I did not change anything. I will save 
working configuration of XF86Config. There is still way to go because my 
modem, scanner, and one of two CDROMs are not recognized by the system.

Can anybody suggest whether I can avoid loading X-system at the boot time?

Thanks everybody for help,

  Alex.

Joel Uckelman wrote:

> Thus spake Alex Pankin:
>
> [snip]
>
>  
>
> > Section "Monitor"
> > 	Identifier   "Monitor0"
> > 	VendorName   "ViewSonic"
> > 	ModelName    "VG800"
> > 	DisplaySize  360	290
> > 	HorizSync    30.0 - 85.0
> > 	VertRefresh  60.0 - 75.0
> > 	Option	    "dpms"
> > EndSection
> >    
>
> The horizontal sync and vertical refresh here don't match the specs
> ViewSonic has on it's site:
>
> http://www.viewsonic.com/products/lcd_vg800.htm#specs
>
> There is says 30-82 for horizontal and 50-75 for vertical.  
>
>  
>
> > Section "Device"
> > 	Identifier  "Videocard0"
> > 	Driver      "ati"
> > 	VendorName  "ATI Technologies Inc"
> > 	BoardName   "ATI All-In-Wonder"
> > EndSection
> >    
>
> As far as I know, there is no driver called "ati". If your All-in-Wonder
> is one of the Rage 128-based ones, you should use "r128"; if it's Radeon-
> based, you should use "radeon" as the driver.
>
>
> --
> fedora-list mailing list
> fedora-list redhat com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
>