Re: problems with later added DDS-2 tape-unit

["Edwin Dicker" <fedora dicker nl>]

> > Hello there!
> > > I have added a DDS-2 tape-unit on an already installed FC2 system 
> > > (running 2.6.6-1.435 kernel). Although the st mod shows up in lsmod, the 
> > > tape-unit sometimes just 'disappeares' when I try to use it, with for 
> > > example tar.
> >
> > Is there any chance it is a hardware issue?
> Nope, I doubt that very much. Because it has worked. It's a HP unit on a 
> Adaptec 2940 UW controler, so I don't see a problem there either. I use a 
> DLT on FC2 on the same type controler at home on one box, and two DDS-3 on 
> also the same controler (also FC2) on another box. But these were already 
> in the machine when I installed FC2.
>
> Thanks for any help, Angelo

As systemengineer I have many many problems with dds1-2-3 tapedrives, most 
of them are read/write errors but some of them have also the same symptoms 
as you describe. They seem to dissappear. The only options is to replace the 
drive.
If it is a new installed drive then please check you termination and you 
cable ( damage).
Do you have more scsi devices on the bus ?? are you sure that the bus is 
only terminated at the controller end and the on the last device ??
The 2940 bios can be set to auto-termination on the controller, perhaps you 
need to alter this setting.

HTH
Edwin