RE: IDE to USB

[Winston Percybrooks <wpercybrooks gmail com>]

Hi,

Here is the output of 'dmesg' when I plug the device:

usb 1-4: new high speed USB device using ehci_hcd and address 2
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
  Vendor: HL-DT-ST  Model: DVDRAM GSA-4163B  Rev: A103
  Type:   CD-ROM                             ANSI SCSI revision: 00
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 5
usb-storage: device scan complete

According to GNOME 'hwbrowser' application the device is located on
/dev/scd0 but I can't still mount it.


Date: Tue, 21 Jun 2005 18:31:53 -0400
From: Ryan <ryanag zoominternet net>
Subject: Re: IDE to USB question
To: For users of Fedora Core releases <fedora-list redhat com>
Message-ID: <42B89559 6080009 zoominternet net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

This seems very similar to my problem with the samera card reader being
auto-detected in FC 3, not in FC 4.

Stefan Held wrote:
> Am Dienstag, den 21.06.2005, 10:56 -0500 schrieb Winston S. Percybrooks
> B.:
>
>>Hi everybody,
>>
>>I've been a user of Fedora for almost a year and a half. Currently my
>>laptop runs FC2 with a custom 2.6.11 kernel. Recently I try an IDE to
>>USB case with a 80GB HDD and it works without problems, I could mount
>>the partitions on the disk through /dev/sda*. Now I'm trying the same
>>case but with a brand new LG DVD writer and I'm having some troubles. I
>>can use the drive to burn CDs and DVDs (using cdrecord dev=0,0,0 ...)
>>but I cannot use the drive to read any disk because mount says that none
>>/dev/sd* device is valid. So, can any of you help me? I really need to
>>know how to mount that "hidden" drive. Thanks in advance for your help.
>>
>
>
> What does /var/log/messages tell you about the device?
>
>
>