[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
Re: ip alias problem (SOLVED!!)
- From: Ajay Sharma <ssharma odc net>
- To: shrike-list redhat com
- Subject: Re: ip alias problem (SOLVED!!)
- Date: Wed, 4 Jun 2003 18:00:57 -0700 (PDT)
On Wed, 4 Jun 2003, William Hooper wrote:
[massive snip!]
> I don't think anyone has asked yet, what does "/sbin/route" show?
DAMN! I must be braindead and I didn't even look at /sbin/route. I
remember putting in the "NO_ALIASROUTING=yes" line in
/etc/sysconfig/network but you have to put it in each
/etc/sysconfig/network-scripts/ifcfg-eth0:X file. I added that line in
all four ifcfg files, rebooted, and it came up fine. Now mysql, ssh,
and everything else works perfectly!
I do have one more question though. Where are the networking scripts
supposed to be now? There are two folders:
old one: /etc/sysconfig/network-scripts/ifcfg-XXXX
new one: /etc/sysconfig/networking/devices/ifcfg-XXXX
These servers I'm working on don't have a GUI so I have to do everything
by editing the files (which I prefer).
And just for reference, this is what /sbin/route showed me before I
fixed it:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.1.0 0.0.0.0 255.255.255.192 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
later,
ajay
--------------------------------------------------------------------
Satyajot (Ajay) Sharma
ssharma odc net
--------------------------------------------------------------------
[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]