Re: Manually configuring modem line

[Christopher Wong <chris csports com>]

On Thu, 1 May 2003, shrek-m gmx de wrote:
> Jeff Kinz schrieb:
> >Did your UPS come with any Linux based software to make your linux box
> >UPS-aware or UPS-friendly?
> >
> easy to install, works great
> 
> # service apcupsd status
> DATE     : Thu May 01 15:30:09 CEST 2003
> HOSTNAME : xp1800
> RELEASE  : 3.10.3
> VERSION  : 3.10.3 (12 December 2002) redhat
> UPSNAME  : APC#1
> CABLE    : Custom Cable Smart
> MODEL    : SMART-UPS 700
> UPSMODE  : Stand Alone
> STARTTIME: Thu May 01 12:16:49 CEST 2003
> STATUS   : ONLINE
> LINEV    : 222.3 Volts
> LOADPCT  :  26.5 Percent Load Capacity
> BCHARGE  : 100.0 Percent
> ...
> 
> http://www.sibbald.com/apcupsd/

Thanks for mentioning apcupsd. I should mention that the nut packages that
comes with RH9 works fine with APC UPSs. I used the newapc driver. My
problems were due to confusion about which config file to edit (the Red
Hat Way is to use /etc/sysconfig/ups, not /etc/ups/ups.conf) and the cable 
that I was using.

Chris