[Sound] More Crystal SC problems

[Christopher Deckard <chrisd icns com>]

Hello,

I ran sndconfig (v.38  RH 6.1 Kernel 2.2.12-20),  and the probe detects my soundchip fine (crystal cs4237B), but, when it goes to
play a soundfile, I get:

/etc/isapnp.conf:310 -- Fatal  - IO Range Check attempted while device activated.
/etc/isapnp.conf:310 -- Fatal - Error occurred executing request '<IORESCHECK>' --- further action aborted.

Since this is a chip integrated into the motherboard (IBM Aptiva), there are no jumpers, etc., to configure.  Although this leads me
to think that I have some sort of IRQ/DMA conflict with another device, I am at a bit of a loss.  Could you give me some suggestions?

Thanks,

Chris Deckard
Saint Louis, Moe





Bill Nottingham wrote:

> Lucas Fugikawa Santos (lucas@if.sc.usp.br) said:
> > I tried to install my Crystal Codec sound card in Red Hat Linux enviroment and the following message appeared:
> > "error executting modprobe: /lib/modules/2.2.5-23cl/misc/cs4232.o: invalid parameter mpu_base uart401: Device ou resource busy"
>
> This generally implies that the parameters given to the driver
> (io port, IRQ, etc) don't match what the card is configured as.
>
> Bill
>
> _______________________________________________
> Sound-list mailing list
> Sound-list@redhat.com
> https://listman.redhat.com/mailman/listinfo/sound-list