RE: Emulex HBA AS3

[Rafael Ferreira <Rafael Ferreira apollogrp edu>]

Sorry I should have been a lot more explicit on this, but after a insmod -v
I see this entries in dmesg

Emulex LightPulse FC SCSI/IP: 2.01g    Osgt: 1.08
PCI: Enabling device 01:01.0 (0156 -> 0157)
lpfc0:0442:INe:Adapter failed to init, mbxCmd x88 CONFIG_PORT, mbxStatus x12
Data: x0
lpfc0:0442:INe:Adapter failed to init, mbxCmd x88 CONFIG_PORT, mbxStatus x12
Data: x0

the end of insmod -v is:

xftw_readdir /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/skfp
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/skfp
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/skfp/skfp.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/slhc.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/tg3.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/tlan.o
type 2 /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/tokenring
xftw_readdir /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/tokenring
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/tokenring
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/tokenring/olympic.o
type 2 /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/tulip
xftw_readdir /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/tulip
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/tulip
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/tulip/tulip.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/typhoon.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/via-rhine.o
type 2 /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/wireless
xftw_readdir /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/wireless
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/wireless
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/wireless/airo.o
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/wireless/airo_cs.o
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/wireless/hermes.o
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/wireless/orinoco.o
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/wireless/orinoco_cs.o
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/wireless/orinoco_pci.o
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/net/wireless/orinoco_plx.o
type 2 /lib/modules/2.4.21-4.ELsmp/kernel/drivers/parport
xftw_readdir /lib/modules/2.4.21-4.ELsmp/kernel/drivers/parport
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/parport
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/parport/parport.o
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/parport/parport_cs.o
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/parport/parport_pc.o
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/parport/parport_serial.o
type 2 /lib/modules/2.4.21-4.ELsmp/kernel/drivers/pcmcia
xftw_readdir /lib/modules/2.4.21-4.ELsmp/kernel/drivers/pcmcia
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/pcmcia
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/pcmcia/ds.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/pcmcia/i82365.o
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/pcmcia/pcmcia_core.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/pcmcia/tcic.o
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/pcmcia/yenta_socket.o
type 2 /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi
xftw_readdir /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/3w-xxxx.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/BusLogic.o
type 2 /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/aacraid
xftw_readdir /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/aacraid
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/aacraid
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/aacraid/aacraid.o
type 2 /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/aic7xxx
xftw_readdir /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/aic7xxx
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/aic7xxx
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/aic7xxx/aic79xx.o
user function
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/aic7xxx/aic7xxx.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/aic7xxx_old.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/ata_piix.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/dpt_i2o.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/gdth.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/ide-scsi.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/ips.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/libata.o
user function /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/lpfcdd.o
Using /lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/lpfcdd.o
Symbol version prefix 'smp_'
/lib/modules/2.4.21-4.ELsmp/kernel/drivers/scsi/lpfcdd.o: init_module: No
such device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg


*** this server is actually a HPDL380 G3. with a Emulex Corporation LP952
Fibre Channel Adapter

I hope that helps, and thanks!


-----Original Message-----
From: taroon-list-bounces redhat com [mailto:taroon-list-bounces redhat com]
On Behalf Of Ed Wilts
Sent: Wednesday, June 09, 2004 9:55 AM
To: Discussion of Red Hat Enterprise Linux 3 (Taroon)
Subject: Re: Emulex HBA AS3

On Wed, Jun 09, 2004 at 09:39:50AM -0700, Rafael Ferreira wrote:
> I'm trying to get an Emulex HBA to work on my DL580 running AS3, but I'm
> running into problems, my kernel is
> 
> 2.4.21-4.ELsmp #1 SMP
> 
> Can anyone give me any pointers? I got the emulex kernel module to build
but
> when I try to insmod it fails. 

It's been working fine for me. with a pair of Emulex LP8000 HBAs on a
DL380 G1.

Please define "it fails".  What error message do you get with a -v?

I've got the following entry in /etc/modules.conf:
alias scsi_hostadapter1 lpfcdd

On my system, scsi_hostadapter is the cpqarray for the onboard SmartArray.

You will have issues at boot time since the driver won't automatically
load at boot time.  I resolved that with an initrd. 

I'm running 2.4.21-15.Esmp

-- 
Ed Wilts, RHCE
Mounds View, MN, USA
mailto:ewilts ewilts org
Member #1, Red Hat Community Ambassador Program


--
Taroon-list mailing list
Taroon-list redhat com
http://www.redhat.com/mailman/listinfo/taroon-list