On Fri, 2005-08-19 at 18:03 -0500, Ed Wilts wrote: > On Fri, Aug 19, 2005 at 03:24:17PM -0700, Tobias Speckbacher wrote: > > I have a couple of hosts hooked up to our new EVA-6000, all hosts have 2 > > Qlogic 2340 hba's running across 2 fabrics. The driver is configured to > > utilize multipathing (aware of the support issues). > > There are less support issues than we originally thought... You're in > even better shape than I am (EVA5000 based) since you've got an > active/active controller and have more options. > > > Everything is working like a charm, i carve out a lun, present it, > > rescan on the host .... it all just works. > > > > The only thing that bugs me is that i can not get the hba's to ignore > > lun 0, thus the system sees it as a scsi device and assigns it > > to /dev/sda. > > lun 0 is the controller. You can't do anything about it, nor do you > have to worry about it. > > My devices, with the qlogic driver and multipathing, simply come up as > sda1, sdb1, sdc1, etc. I don't have 26 luns so I'm not sure what > happens after sdz1 :-) I think after sdz it goes to sdaa (memory kinda foggy on that though) Since I see the controller as /dev/sda on my systems sda1 is not an option. Did you mean to start your partition list above with sdb1 or does your system ignore lun 0 and assign lun 1 to sda ? >
Attachment:
signature.asc
Description: This is a digitally signed message part