[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
Re: Unable to install RHEL3 U9 on a AM2-based Mainboard
- From: Andre Schubert <andre km3 de>
- To: "Discussion of Red Hat Enterprise Linux 3 (Taroon)" <taroon-list redhat com>
- Subject: Re: Unable to install RHEL3 U9 on a AM2-based Mainboard
- Date: Thu, 5 Jul 2007 14:11:52 +0200
Hi,
this panic occurs when booting from the RHEL3-Install-CD.
Based on your informations, i have disabled the onboard SATA-Controller
and installed a 3Ware raid-controller, but the panic always occurs.
Thanks,
Andre Schubert
On Wed, 04 Jul 2007 09:26:54 -0500
"Paul Krizak" <paul krizak amd com> wrote:
> Weird.
>
> The "swapper" process was on the stack (as pid #1) when the system
> paniced. So perhaps the kernel is trying to initialize swap space using
> a poorly-supported SATA controller, or the wrong driver is getting
> loaded for your memory controller (remember, AM2 is DDR2, previous stuff
> was DDR1)
>
> Is this a fresh install of RHEL3? If you're able to do a fresh install
> but then the kernel panics on the first "real" boot (or panics when
> booting off the install CD) then we might be looking at a bug here.
>
> But if this was just a hardware upgrade, with no change to the OS
> already on the hard disk, then it may just be that the initrd doesn't
> contain the appropriate driver for your new memory controller or SATA
> controller. If this is the case, you'll need to boot from the rescue CD
> and do some initrd voodoo to get your system back up and running. Or,
> just do a fresh install.
>
> Finally, keep in mind that RHEL is designed for enterprise customers
> that can depend on hardware on the compatibility list to work. It
> sounds like you're trying to install RHEL on commodity desktop hardware,
> which is most likely not on the compatibility list. RHEL3 is *old*, and
> thus does not work well with new hardware. Big names like HP and Sun
> were able to get their new AM2-based workstations on the RHEL3
> compatibility list because they helped Red Hat by providing updated
> drivers for everything. "ASRock" probably did not do that.
>
> If this is for a home system, I'd recommend something like Fedora Core
> 7, which will have *much* better hardware support than RHEL3, but isn't
> necessarily an "enterprise" OS. If you *need* an enterprise OS, try
> RHEL5 and see if it works for you.
>
> Paul Krizak 5900 E. Ben White Blvd. MS 625
> Advanced Micro Devices Austin, TX 78741
> Linux/Unix Systems Engineering Phone: (512) 602-8775
> Silicon Design Division Cell: (512) 791-0686
>
>
> Andre Schubert wrote:
> > Hi,
> >
> > i have tried all these kernel parameters, nothing helped.
> > I also have tried to disable all the onboard-stuff and nothing helped.
> > The hardware is a ASRock ALiveSATA2-GLAN with VIA K8T890 Chipset
> > and a AMD Sempron 3200+ (64Bit).
> > I also have tried a ASUS-M2V with a AMD Athlon 3800+ wich also doesnt work.
> > I also have tried the 64-Bit version with no luck.
> >
> > This is the RHEL3-i386-U9 kernel-panic, wich is always the same.
> >
> > Oops: 0000
> > CPU: 0
> > EIP: 0060:[<c010c539>] Not tainted
> > EFLAGS: 00010002
> >
> > EIP is at (2.4.21-50.ELBOOT/i686)
> > eax: 00000000 ebx: fffffed0 ecx: ffffffed edx: c02beed0
> > esi: 00000293 edi: 00000000 ebp: ffffffed esp: f7ff3f58
> > ds: 0068 es: 0068 ss: 0068
> > Process swapper (pid: 1, stackpage=f7ff3000)
> > Stack: ffffffed 00000000 c0312d40 c01c43ac ffffffed c36c1000 00000000 00000000
> > c0312d40 00000000 00000000 c01c4d96 c0312d40 00000001 00000001 00000001
> > 00000001 00000001 00000001 00000001 00000001 00000001 00000001 00000000
> > Call trace: [<c01c43ac>] (0xf7ff3f64)
> > [<c01c4d96>] (0xf7ff3f84)
> > [<c0107028>] (0xf7ff3fd8)
> > [<c0107036>] (0xf7ff3fdc)
> > [<c0107028>] (0xf7ff3fe0)
> > [<c0108fe1>] (0xf7ff3ff0)
> >
> > Code: ff 50 10 58 eb d3 90 57 56 53 8b 74 24 10 89 f2 c1 e2 04 8d
> >
> >
> > Thanks,
> > Andre Schubert
> >
> >
> > On Tue, 03 Jul 2007 09:30:58 -0500
> > "Paul Krizak" <paul krizak amd com> wrote:
> >
> >> We had issues getting RHEL3/4 to install on newer AMD-based hardware for
> >> various reasons. Try one of these on the kernel cmd line:
> >>
> >> * noapic nolapic acpi=off
> >> * pci=conf1
> >> * nmi_watchdog=0
> >>
> >> If you still can't get the kernel to boot, post the output here and we
> >> can take a look.
> >>
> >> What specific kind of hardware are you trying to install on?
> >>
> >> Paul Krizak 5900 E. Ben White Blvd. MS 625
> >> Advanced Micro Devices Austin, TX 78741
> >> Linux/Unix Systems Engineering Phone: (512) 602-8775
> >> Silicon Design Division Cell: (512) 791-0686
> >>
> >>
> >> Andre Schubert wrote:
> >>> Hi,
> >>>
> >>> i recently bought a mainboard with an AM2-socket.
> >>> Everytime i try to install RHEL3 U9 i got a kernel-panic during booting.
> >>> The kernel-panic is always the same and always reproducible.
> >>>
> >>> For testing purposes a had time to test another mainboard from a different vendor,
> >>> with different ram/harddrives/cdrom etc., but the kernel panic is still the same.
> >>>
> >>> Are there any know issues on installing RHEL3 U9 on a AM2-socket mainboard ?
> >>>
> >>> I have absolutely no idea what to do next.
> >>> Hope someone could help me a little bit ?
> >>>
> >>> Best regards,
> >>> Andre Schubert
> >>>
> >>> --
> >>> Taroon-list mailing list
> >>> Taroon-list redhat com
> >>> https://www.redhat.com/mailman/listinfo/taroon-list
> >>>
> >>
> >> --
> >> Taroon-list mailing list
> >> Taroon-list redhat com
> >> https://www.redhat.com/mailman/listinfo/taroon-list
> >>
> > --
> > Andre Schubert EMail: Andre Schubert km3 de
> > Tel: 03774 6625-76
> > Fax: 03774 6625-79
> > km3 teledienst GmbH
> >
> > Sitz:
> > August-Bebel-Straße 86
> > 08344 Grünhain-Beierfeld
> >
> > Geschäftsführer:
> > Dipl.-Ing. Mike Bielagk
> > Dipl.-Ing. Heiko Lötzsch
> >
> > Registergericht: Chemnitz, HRB 18881
> > Umsatzsteuer-ID: DE 216 086 551
> >
> >
> >
> > ****************************************
> > km3 teledienst GmbH
> > August-Bebel-Str. 86
> > D-08344 Grünhain-Beierfeld
> >
> > Telefon : +49 (0) 37 74 66 25 - 78
> > Telefax : +49 (0) 37 74 66 25 - 79
> > eMail : buero km3 de
> >
> > Internet : http://www.km3.de
> >
> > Geschäftsführer:
> > Heiko Lötzsch
> > Mike Bielagk
> >
> > Registergericht: Amtsgericht Chemnitz,
> > Handelsregister: B Nr. 18881
> > Umsatzsteuer-ID: DE 216 086 551,
> > Steuer-Nr. : 218 / 112 / 02921
> > ****************************************
> >
> >
> > --
> > Taroon-list mailing list
> > Taroon-list redhat com
> > https://www.redhat.com/mailman/listinfo/taroon-list
> >
> >
>
>
>
> --
> Taroon-list mailing list
> Taroon-list redhat com
> https://www.redhat.com/mailman/listinfo/taroon-list
>
****************************************
km3 teledienst GmbH
August-Bebel-Str. 86
D-08344 Grünhain-Beierfeld
Telefon : +49 (0) 37 74 66 25 - 78
Telefax : +49 (0) 37 74 66 25 - 79
eMail : buero km3 de
Internet : http://www.km3.de
Geschäftsführer:
Heiko Lötzsch
Mike Bielagk
Registergericht: Amtsgericht Chemnitz,
Handelsregister: B Nr. 18881
Umsatzsteuer-ID: DE 216 086 551,
Steuer-Nr. : 218 / 112 / 02921
****************************************
[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]