If a DHCP server does not already exist on the network, configure
one. Refer to Chapter 25 Dynamic Host Configuration Protocol (DHCP) for details. Make sure the
configuration file contains the following so PXE booting is enabled for
systems that support it:
allow booting;
allow bootp;
class "pxeclients" {
match if substring(option vendor-class-identifier, 0, 9) = "PXEClient";
next-server <server-ip>;
filename "linux-install/pxelinux.0";
} |
The IP address that follows the
next-server option should be the IP
address of the tftp server.