[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: ASUS FastTrack 378 controller



>----- Original Message ----- 
>From: "Eugen Leitl" <eugen leitl org>
>To: "Beaver" <beaver jbsys com>
>Sent: Thursday, May 27, 2004 12:43 PM
>Subject: Re: ASUS FastTrack 378 controller.

>On Thu, May 27, 2004 at 11:56:47AM -0700, Beaver wrote:

>> I have an ASUS K8V SE deluxe mother board that has a Promise FastTrack 378
disk
>> controller.  It can be set as a RAID controller or as a third IDE controller.
I
>> have two 160GB IDE disks attached to it but it seems FC2 will not recognize
the
>> controller or the drives no matter what the mode is set to.  Is this device

>What have you set up in the BIOS?

>Does dmesg show something like

>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VIA8237SATA: IDE controller at PCI slot 0000:00:0f.0
>VIA8237SATA: chipset revision 128
>VIA8237SATA: 100% native mode on irq 10
>    ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
>    ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
>hde: WDC WD360GD-00FNA0, ATA DISK drive
>Using cfq io scheduler
>ide2 at 0xe800-0xe807,0xe402 on irq 10
>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
>   ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:DMA
>   ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
>hdb: ATAPI DVD+RW 8X4X12, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hdc: Maxtor 7Y250P0, ATA DISK drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hde: max request size: 1024KiB
>hde: 72303840 sectors (37019 MB) w/8192KiB Cache, CHS=16383/255/63
> hde: hde1 hde2 hde3
>hdc: max request size: 1024KiB
>hdc: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63,
>UDMA(133)
>hdc: hdc1
>hdb: ATAPI 40X DVD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)


>> supported?  How can I get the devices assigned so I can put some data on the
>> disks?
>>
>>
>>
>> -- 
>> amd64-list mailing list
>> amd64-list redhat com
>> https://www.redhat.com/mailman/listinfo/amd64-list
>-- 
>Eugen* Leitl <a href="http://leitl.org";>leitl</a>
>______________________________________________________________
>ICBM: 48.07078, 11.61144            http://www.leitl.org
>8B29F6BE: 099D 78BA 2FD3 B014 B08A  7779 75B0 2443 8B29 F6BE
>http://moleculardevices.org         http://nanomachines.net

The BIOS has a setting for 'Onboard Promise Controller" that can be set to
'RAID' or 'Onboard IDE Operate Mode'.  The first setting allows RAID for IDE
drives.  The second effectively allows a third IDE controller.  With either
setting, FC2 does not see any additional disks.  Here is my dmesg (just the disk
part) and lspci for my system.

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VIA8237SATA: IDE controller at PCI slot 0000:00:0f.0
VIA8237SATA: chipset revision 128
VIA8237SATA: 100% native mode on irq 20
    ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y080P0, ATA DISK drive
hdb: WDC WD300BB-32AUA1, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
hdd: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdb: max request size: 128KiB
hdb: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(100)
 hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 >
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]