Intel SR1325TP1-E raid device not discovered
Heinz Mauelshagen
mauelshagen at redhat.com
Wed Sep 15 13:34:08 UTC 2004
Hmm, ICH5 ;)
Can you send me metadata copies (the last 10 sectors) of both disks
(tar'ed and bzip'ed), please ?
Heinz
On Wed, Sep 15, 2004 at 11:41:15AM +0200, Hein Gustavsen wrote:
> Hello
>
> dmraid will not discover the raid device on my Intel SR1325TP1-E
> motherboard.
>
> I have enabled raid in bios and created a RAID-1 array.
>
> Does anyone know if the raid controller on this motherboard is
> supported?
>
> I have included some more information below.
>
> dmesg:
> ------------------------------------------------------------------------
> --------
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> ICH5: IDE controller at PCI slot 0000:00:1f.1
> ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
> ICH5: chipset revision 2
> ICH5: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:DMA
> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
> hdb: SR244W, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hdb: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> libata version 1.02 loaded.
> ata_piix version 1.02
> ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ata1: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xD400 irq 18
> ata2: SATA max UDMA/133 cmd 0xDC00 ctl 0xD802 bmdma 0xD408 irq 18
> ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003
> 88:407f
> ata1: dev 0 ATA, max UDMA/133, 160086528 sectors:
> ata1: dev 0 configured for UDMA/133
> scsi0 : ata_piix
> ata2: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003
> 88:407f
> ata2: dev 0 ATA, max UDMA/133, 160086528 sectors:
> ata2: dev 0 configured for UDMA/133
> scsi1 : ata_piix
> Vendor: ATA Model: Maxtor 6Y080M0 Rev: YAR5
> Type: Direct-Access ANSI SCSI revision: 05
> Vendor: ATA Model: Maxtor 6Y080M0 Rev: YAR5
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
> SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
> SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
> SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
> Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
> Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
> Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
> ------------------------------------------------------------------------
> --------
>
> lspci:
> ------------------------------------------------------------------------
> --------
> 00:1f.1 IDE interface: Intel Corp. Enterprise Southbridge PATA (rev 02)
> (prog-if 8a [Master SecP PriP])
> Subsystem: Intel Corp.: Unknown device 342f
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at <unassigned>
> Region 1: I/O ports at <unassigned>
> Region 2: I/O ports at <unassigned>
> Region 3: I/O ports at <unassigned>
> Region 4: I/O ports at fc00 [size=16]
> Region 5: Memory at 20000000 (32-bit, non-prefetchable)
> [size=1K]
>
> 00:1f.2 RAID bus controller: Intel Corp. Enterprise Southbridge SATA
> cc=RAID (rev 02) (prog-if 8f)
> Subsystem: Intel Corp.: Unknown device 3430
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at e400 [size=8]
> Region 1: I/O ports at e000 [size=4]
> Region 2: I/O ports at dc00 [size=8]
> Region 3: I/O ports at d800 [size=4]
> Region 4: I/O ports at d400 [size=16]
>
> dmraid -b -vvv:
>
> ERROR: unsupported sector size 2048 on /dev/hdb.
> NOTICE: Block devices discovered:
>
> /dev/sda: 160086528 total, "Y23RCWEE"
> /dev/sdb: 160086528 total, "Y23STKCE"
> ------------------------------------------------------------------------
> --------
>
> dmraid -r -vvv:
> ------------------------------------------------------------------------
> --------
> INFO: locking /var/lock/dmraid/.lock
> ERROR: unsupported sector size 2048 on /dev/hdb.
> INFO: /dev/sda: hpt37x discovering
> INFO: /dev/sda: hpt45x discovering
> INFO: /dev/sda: isw discovering
> INFO: /dev/sda: lsi discovering
> INFO: /dev/sda: pdc discovering
> INFO: /dev/sda: sil discovering
> INFO: /dev/sdb: hpt37x discovering
> INFO: /dev/sdb: hpt45x discovering
> INFO: /dev/sdb: isw discovering
> INFO: /dev/sdb: lsi discovering
> INFO: /dev/sdb: pdc discovering
> INFO: /dev/sdb: sil discovering
> No Software RAID disks
> INFO: unlocking /var/lock/dmraid/.lock
> ------------------------------------------------------------------------
> --------
>
>
> _______________________________________________
> Ataraid-list mailing list
> Ataraid-list at redhat.com
> https://www.redhat.com/mailman/listinfo/ataraid-list
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Heinz Mauelshagen Red Hat GmbH
Consulting Development Engineer Am Sonnenhang 11
56242 Marienrachdorf
Germany
Mauelshagen at RedHat.com +49 2626 141200
FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
More information about the Ataraid-list
mailing list