[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: No /bin/insmod on RedHat 5.1 Alpha boot floppies???

On Wed, 26 Aug 1998, Neil Harkins wrote:

> On Wed, 26 Aug 1998, Barrett G. Lyon wrote:
> > >/bin/insmod: No such file or directory.
> > >
> > The images are not defective, what that means is that your SCSI adapter was
> > not detcted during boot, and the tools needed to use the module for NCR
> > 53C8xxx were not loaded from the image.
> > 
> > Make sure your card is configured correctly, 
> > or try a different SCSI adapter.  
> It's not a card. It's on-board. :( And it sure finds it during the boot:
> ncr53c8xx: at PCI bus 0, device 6, function 0
> ncr53c8xx: 53c810 detected
> ncr53c810-0: rev=0x02, base=0x580100, io_port=0x8800, irq=11
> ncr53c810-0: ID 7, Fast-10, Parity Checking
> ncr53c810-0: restart (scsi reset).
> scsi : ncr53c8xx - revision 2.5f
> scsi : 1 host
> scsi : detected total.

Well, that solves your problem.  It is built into the kernel at boot, so
when it tries to load it via insmod, it shouldn't load it because you
already have it built into the kernel.  In other words, you don't need the
module anyway.

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index] []