[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: APC164 hangs in milo



On Wed, Sep 23, 1998 at 09:38:36AM -0300, Jay.Estabrook@digital.com wrote:
> 
> >>> Julian Reichwald said:
> > 
> > I have an APC164-UX-Board and the following problem: 
> > 
> > I downloaded the correct ldmilo.exe and all the other stuff 
> > needed from gatekeeper's ftp site (also tried the original stuff from
> > deskstation). I copied everything to a DOS-Disk and started 
> > ldmilo.exe from BIOS level.
> > 
> > ldmilo came up, loaded osfpal.nh and milo.ful. 
> > 
> > But when milo.ful was loaded, the system stuck.
> > No milo-prompt, the cursor jumped to the top of the screen and nothing 
> > happened. 
> 
> Make certain that your VGA controller is in the 64-bit PCI slot; all the
> 32-bit PCI slots are behind a PCI-PCI bridge, and the VGA will not work
> there, at least under MILO... :-\
> 
thank you, that was the prob. It works now.

-- 
so long,
                Julian                           Fingerprint:
       email: smidge@cityweb.de           8D 0F 8C 79 48 05 D9 DA  
	   PGP KEY AVAILABLE! 		  06 68 84 79 1F EF FD 8D
             



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index] []