[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[Cluster-devel] [PATCH] RHEL5: fence-agents: Regerate fence_ipmilan.8 man page



Resolves: rhbz#671089

Signed-off-by: Lon Hohberger <lhh redhat com>
---
 fence/man/fence_ipmilan.8 |  262 ++++++++++++++++++++++++++++----------------
 1 files changed, 167 insertions(+), 95 deletions(-)

diff --git a/fence/man/fence_ipmilan.8 b/fence/man/fence_ipmilan.8
index 9b10198..3bca4d1 100644
--- a/fence/man/fence_ipmilan.8
+++ b/fence/man/fence_ipmilan.8
@@ -1,111 +1,183 @@
-.\"  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
-.\"  Copyright (C) 2004 Red Hat, Inc.  All rights reserved.
-.\"  
-.\"  This copyrighted material is made available to anyone wishing to use,
-.\"  modify, copy, or redistribute it subject to the terms and conditions
-.\"  of the GNU General Public License v.2.
-
-.TH fence_ipmilan 8
 
+.TH FENCE_AGENT 8 2009-10-20 "fence_ipmilan (Fence Agent)"
 .SH NAME
-fence_ipmilan - I/O Fencing agent for machines controlled by IPMI over
-LAN.
+fence_ipmilan - Fence agent for IPMI over LAN
+.SH DESCRIPTION
+.P
 
-.SH SYNOPSIS
-.B
-fence_ipmilan
-[\fIOPTION\fR]...
+fence_ipmilan is an I/O Fencing agent which can be used with machines controlled by IPMI. This agent calls support software using ipmitool (http://ipmitool.sf.net/).
 
-.SH DESCRIPTION
-fence_ipmilan is an I/O Fencing agent which can be used with 
-machines controlled by IPMI.  This agent calls support software
-using ipmitool (http://ipmitool.sf.net/).
+To use fence_ipmilan with HP iLO 3 you have to enable lanplus option (lanplus / -P) and increase wait after operation to 4 seconds (power_wait=4 / -T 4)
+.P
+fence_ipmilan accepts options on the command line as well
+as from stdin. Fenced sends parameters through stdin when it execs the
+agent. fence_ipmilan can be run by itself with command
+line options.  This is useful for testing and for turning outlets on or off
+from scripts.
 
-fence_ipmilan accepts options on the command line as well as from stdin.  
-fenced sends the options through stdin when it execs the agent.  fence_ipmilan
-can be run by itself with command line options which is useful for testing.
+.SH PARAMETERS
 
-.SH OPTIONS
-.TP
-\fB-a\fP \fIIPaddress\fP
-IP address or hostname of the IPMI controller.
-.TP
-\fB-h\fP
-Print out a help message describing available options, then exit.
-.TP
-\fB-l\fP \fIlogin\fP
-Login (if required) with administrative privileges.
-.TP
-\fB-o\fP \fIoption\fP
-Action to perform (on, off, reboot).
-.TP
-\fB-p\fP \fIpassword\fP
-Password (if required) for login.
-.TP
-\fB-P\fP
-Use the lanplus option if this is a lanplus capable interface (for example iLo2)
+	
+.TP
+.B -A
+. 
+IPMI Lan Auth type (md5, password, or none)
+	
+.TP
+.B -a
+. 
+IPMI Lan IP to talk to
+	
+.TP
+.B -p
+. 
+Password (if required) to control power on IPMI device
+	
+.TP
+.B -S
+. 
+Script to retrieve password (if required)
+	
+.TP
+.B -P
+. 
+Use Lanplus
+	
+.TP
+.B -l
+. 
+Username/Login (if required) to control power on IPMI device
+	
+.TP
+.B -o
+. 
+Operation to perform. Valid operations: on, off, reboot, status, list, monitor or metadata (Default Value: reboot)
+	
+.TP
+.B -t
+. 
+Timeout (sec) for IPMI operation
+	
+.TP
+.B -C
+. 
+Ciphersuite to use (same as ipmitool -C parameter)
+	
+.TP
+.B -M
+. 
+Method to fence (onoff or cycle) (Default Value: onoff)
+	
+.TP
+.B -T
+. 
+Wait X seconds after on/off operation (Default Value: 2)
+	
+.TP
+.B -f
+. 
+Wait X seconds before fencing is started
+	
+.TP
+.B -v
+. 
+Verbose mode
+
+.SH ACTIONS
+
+	
 .TP
-\fB-A\fP \fIAuthentication Type\fP
-Can be set to none, password, md2, or md5.
+\fBon \fP
+Power on machine.
+	
 .TP
-\fB-C\fP \fICiphersuite Type\fP
-If you are using lanplus, this option avails you to define type of ciphersuite to
-use. Standard is 3 (defined if you just use lanplus). For more information please
-refer ipmitool man page (option -C).
+\fBoff \fP
+Power off machine.
+	
 .TP
-\fB-M\fP \fImethod\fP
-Method to fence (onoff or cycle). Default is onoff. Use cycle in case your management
-card will power off with default method so there will be no chance to power machine
-on by IPMI.
+\fBreboot \fP
+Reboot machine.
+	
 .TP
-\fB-t\fP \fItimeout\fP
-Timeout in seconds for IPMI operation. Default is 10, but in some cases it
-must be set to higher value (anything above 30 is not recommended and may
-cause strange problems).
+\fBstatus \fP
+This returns the status of the plug/virtual machine.
+	
 .TP
-\fB-q\fP
-Quiet operation.  Only print out error messages.
+\fBlist \fP
+List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
+	
 .TP
-\fB-V\fP
-Print out a version message, then exit.
+\fBmonitor \fP
+Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more).
+	
 .TP
-\fB-v\fP
-Verbose mode.
+\fBmetadata \fP
+ The operational behavior of this is not known.
 
 .SH STDIN PARAMETERS
-.TP
-\fIipaddr = < hostname | ip >\fR
-IP address or hostname of the IPMI controller.
-.TP
-\fIlogin= < param >\fR
-Login (if required) with administrative privileges.
-.TP
-\fIoption = < param >\fR
-Action to perform (on, off, reboot).
-.TP
-\fIpasswd = < param >\fR
-Password (if required) for login.
-.TP
-\fIauth = < param >\fR
-Authentication type (none, password, md2, md5).
-.TP
-\fItimeout = < param >\fR
-Timeout in seconds for IPMI operation. Default is 10, but in some cases it
-must be set to higher value (anything above 30 is not recommended and may
-cause strange problems).
-.TP
-\fIcipher = < param >\fR
-If you are using lanplus, this option avails you to define type of ciphersuite to
-use. Standard is 3 (defined if you just use lanplus). For more information please
-refer ipmitool man page (option -C).
-.TP
-\fImethod = < param >\fR
-Method to fence (onoff or cycle). Default is onoff. Use cycle in case your management
-card will power off with default method so there will be no chance to power machine
-on by IPMI.
-.TP
-\fIlanplus\fR
-If we are using the lanplus option for ipmitool
 
-.SH SEE ALSO
-fence(8), fence_node(8), ipmitool(1)
+	
+.TP
+.B auth
+. 
+IPMI Lan Auth type (md5, password, or none)
+	
+.TP
+.B ipaddr
+. 
+IPMI Lan IP to talk to
+	
+.TP
+.B passwd
+. 
+Password (if required) to control power on IPMI device
+	
+.TP
+.B passwd_script
+. 
+Script to retrieve password (if required)
+	
+.TP
+.B lanplus
+. 
+Use Lanplus
+	
+.TP
+.B login
+. 
+Username/Login (if required) to control power on IPMI device
+	
+.TP
+.B action
+. 
+Operation to perform. Valid operations: on, off, reboot, status, list, monitor or metadata (Default Value: reboot)
+	
+.TP
+.B timeout
+. 
+Timeout (sec) for IPMI operation
+	
+.TP
+.B cipher
+. 
+Ciphersuite to use (same as ipmitool -C parameter)
+	
+.TP
+.B method
+. 
+Method to fence (onoff or cycle) (Default Value: onoff)
+	
+.TP
+.B power_wait
+. 
+Wait X seconds after on/off operation (Default Value: 2)
+	
+.TP
+.B delay
+. 
+Wait X seconds before fencing is started
+	
+.TP
+.B verbose
+. 
+Verbose mode
-- 
1.7.2.3


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]