[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[dm-devel] multipath table for MSA-1000



I have a single port qla2342 initiator connected to a
MSA-1000 through a Switch.
The two ports of the MSA 1000 are connected to the
switch exposing 2 paths to the target LUNs. 
When I display the topology using

multipath -ll

i get the output as follows:
3600805................
[size=9GB][features=1 queue_if_no_path][hwhandler=0]
\_round-robin 0 [prio=1][active]
 \_ 17:0:0:3 sda 8:0 [failed][faulty]
 \_ 17:0:1:3 sdi  8:128[active][ready]
3600805................
..............................
..............................


Is it normal for a MSA1000 target to have a "faulty"
and a "ready" path. If yes, what does "faulty" signify
? 
Under what condition does the faulty path become
ready?

Thanks in advance.
Shyam
  


		
____________________________________________________ 
Yahoo! India Answers: Share what you know. Learn something new. http://in.answers.yahoo.com


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]