[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: [dm-devel] Multipath and getuid_callout issueswithHPXP1024diskarray

If I do "multipath -ll" then I see [ready][active] as the state...my
prior output was from just "multipath -l"

-----Original Message-----
From: dm-devel-bounces redhat com [mailto:dm-devel-bounces redhat com]
On Behalf Of malahal us ibm com
Sent: Thursday, January 31, 2008 1:33 PM
To: dm-devel redhat com
Subject: Re: [dm-devel] Multipath and getuid_callout

Greene, Rick [rick greene ncogroup com] wrote:
> Thanks for the answers Malahal, you are a credit to the open source
> community!
> Not sure I understand your comment here, can you clarify?
> >Greene, Rick [rick greene ncogroup com] wrote:
> >> create: mpath0 (05:83)
> >> [size=13 GB][features="0"][hwhandler="0"]
> >> \_ round-robin 0
> >>  \_ 1:0:0:0 sda 8:0   [ready]
> >> \_ round-robin 0
> >>  \_ 2:0:0:0 sde 8:64  [ready]
> >
> >The above out displays two states for me. Maybe your version only
> >displays one.

Thank you for the kind words!  On my system, the following is the
Notice that the "undef" state is printed as "DM state" of the device.
your version of multipath tool doesn't print if it is "undef"

create: mpath3 (320000004cf311021)  IBM-ESXS,ST318453FC    
\_ round-robin 0 [prio=1][undef]
 \_ 0:0:4:0 sde 8:64  [undef][ready]
\_ round-robin 0 [prio=1][undef]
 \_ 0:0:9:0 sdj 8:144 [undef][ready]

dm-devel mailing list
dm-devel redhat com

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]