[dm-devel] dm-multipath splitting IOs in 4k blocks

[Bob]

Hello,

I have a question about dm-multipath. As you can see below, it seems that
multipath splits any IO incoming to the device in 4k blocks, and then
reassembles it when doing the actual read from the SAN. If the device is opened
in direct IO mode, this behavior is not experienced. It is not experienced
either if the IO is sent directly to a single path (eg /dev/sdef in this
example).

My question is : what causes this behavior, and is there any way to change that ?

Some quick dd tests would tend to show that the device is quite faster if
multipath doesn't split the IOs.

If you need more inputs, I'll be happy to give them.

Thanks
Bob

[root at test-bis ~]# uname -a
Linux test-bis 2.6.18-128.el5 #1 SMP Wed Dec 17 11:41:38 EST 2008 x86_64 x86_64 x86_64 GNU/Linux
[root at test-bis ~]# rpm -q device-mapper-multipath
device-mapper-multipath-0.4.7-23.el5
[root at test-bis ~]# cat /etc/redhat-release 
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[root at test-bis ~]# multipath -ll testvdisk300
testvdisk300 (3600508b4000ce3e50000700001ab0000) dm-5 HP,HSV450
[size=500G][features=0][hwhandler=0][rw]
\_ round-robin 0 [prio=200][active]
 \_ 1:0:2:22 sdef 128:112 [active][ready]
 \_ 2:0:2:22 sdfh 130:48  [active][ready]
 \_ 1:0:3:22 sdgi 131:224 [active][ready]
 \_ 2:0:3:22 sdgw 132:192 [active][ready]
\_ round-robin 0 [prio=40][enabled]
 \_ 1:0:0:22 sdaf 65:240  [active][ready]
 \_ 2:0:0:22 sdbf 67:144  [active][ready]
 \_ 1:0:1:22 sdcf 69:48   [active][ready]
 \_ 2:0:1:22 sddf 70:208  [active][ready]

[root at test-bis ~]# dd if=/dev/dm-5 of=/dev/null bs=16384

Meanwhile...

[root at test-bis ~]# iostat -kx /dev/dm-5 /dev/sdef /dev/sdfh /dev/sdgi /dev/sdgw 5
...
Device:         rrqm/s   wrqm/s   r/s   w/s    rkB/s    wkB/s avgrq-sz avgqu-sz   await  svctm  %util
sdef           4187.82     0.00 289.42  0.00 17932.14     0.00   123.92     0.45    1.56   1.01  29.34
sdfh           4196.41     0.00 293.81  0.00 17985.63     0.00   122.43     0.41    1.39   0.90  26.37
sdgi           4209.98     0.00 286.43  0.00 17964.07     0.00   125.44     0.69    2.38   1.43  40.98
sdgw           4188.62     0.00 289.22  0.00 17885.03     0.00   123.68     0.54    1.87   1.16  33.59
dm-5              0.00     0.00 17922.55  0.00 71690.22     0.00     8.00    47.14    2.63   0.05  98.28

=> avgrq-sz is 4kB (8.00 blocks) on the mpath device
--------
[root at test-bis ~]# dd if=/dev/dm-5 iflag=direct of=/dev/null bs=16384

iostat now gives :
Device:         rrqm/s   wrqm/s   r/s   w/s    rkB/s    wkB/s avgrq-sz avgqu-sz   await  svctm  %util
sdef              0.00     0.00 640.00  0.00 10240.00     0.00    32.00     0.31    0.48   0.48  30.86
sdfh              0.00     0.00 644.40  0.00 10310.40     0.00    32.00     0.22    0.34   0.34  22.10
sdgi              0.00     0.00 663.80  0.00 10620.80     0.00    32.00     0.24    0.36   0.36  24.20
sdgw              0.00     0.00 640.00  0.00 10240.00     0.00    32.00     0.20    0.32   0.32  20.28
dm-5              0.00     0.00 2587.00  0.00 41392.00     0.00    32.00     0.97    0.38   0.38  97.20

=> avgrq-sz is now 16kB (32.00 blocks) on the mpath device