[dm-devel] [PATCH 1/1] RFC: scsi/dm-mpath: return -EACCES on reservation conflict
Eddie Williams
Eddie.Williams at us.sios.com
Fri Feb 25 18:43:59 UTC 2011
oops, resend as plain text
On Fri, Feb 25, 2011 at 1:40 PM, Eddie Williams
<Eddie.Williams at us.sios.com> wrote:
>
> I did not see a resolution on this and don't see any changes in linux-2.6.38-rc4...
>
> I would like to disagree that it is not useful or appropriate to retry an IO that gets a RESERVATION CONFLICT on different paths to the storage. The issue is a possible window when a path is hot added to the system and before a registration is added for the new path. OK, this window is for SCSI-3 reservations not SCSI-2...
>
> If an IO is sent down the new path in this window then it will get a reservation conflict. If the IO is retried on another path (that is registered) then it will work.
>
> So I think the reservation conflict should be retried on each path and then failed if none work. The key issue being we don't want to get into an infinite loop here where we retry forever especially when another IO comes does (like a read if the lock is a write lock or for many devices a test unit ready) that will look like the path is fine so mark the path good again.
>
> The alternative to retrying would be to make sure that before an IO is allowed down a new path that the path is registered. This would mean that instead of registering/reserving the paths by an application outside of device mapper multipath that it would need to be done inside device mapper so it knows what/when to register.
>
> Eddie Williams
> On Fri, Dec 17, 2010 at 11:59 AM, Mike Snitzer <snitzer at redhat.com> wrote:
>>
>> On Tue, Oct 13 2009 at 12:02am -0400,
>> michaelc at cs.wisc.edu <michaelc at cs.wisc.edu> wrote:
>>
>> > From: Mike Christie <michaelc at cs.wisc.edu>
>> >
>> > This patch was made over this patch
>> > http://marc.info/?l=linux-scsi&m=125417106125449&w=2
>> >
>> > The basic problem is that we do not want dm-multipath to retry
>> > this error, but the scsi layer returns -EIO or -EILSEQ, so
>> > dm-multipath cannot distinguish between a reservation conflict
>> > and other errors.
>> >
>> > This problem was originally discussed here
>> > http://www.linux-archive.org/device-mapper-development/180290-dm-mpath-scsi-persistent-reservation.html
>> >
>> > I have considered adding new blk error values (I have sent pactches
>> > for this before and can send updated ones if we want to go this route),
>> > and even just using more -EXYZ values for scsi errors, but in the end I am
>> > just not sure it ended up being worth it, so this patch just
>> > handles the one error.
>> >
>> > The problem with adding new blk errors is that it seems only dm-multipath
>> > knows what it wants (have not seen anything from the FS or RAID people),
>> > and I also do not know what every device is sending so I cannot completely
>> > clean up cases like where a device returns a error (check condition
>> > and sense) indicating a controller port is temporarily unavialable.
>> > For example, I do not know if I am getting a ILLEGAL request for some
>> > non retryable device error vs the controller is getting its FW updated
>> > (for a non retryable device error case we do not want to fail the path
>> > and just want to fail the IO, but for FW update we just want to fail
>> > the path), so I have to treat those device errors like a transport error
>> > and just fail the path.
>> >
>> > So, I did another take just using lots of different -EXYZ values. See
>> > this patch
>> >
>> > for an example. The problem is still that the transport error
>> > and generic error cases are the same so all I bought was the handling
>> > of the reservation conflict.
>> >
>> > And, that is how I ended up here where I am only handling the one
>> > error I know for sure will cause problems with the infrastructure we have.
>> > I am not in love with this patch, so please give me any other
>> > suggestions.
>> >
>> > Signed-off-by: Mike Christie <michaelc at cs.wisc.edu>
>> > ---
>> > drivers/md/dm-mpath.c | 2 +-
>> > drivers/scsi/scsi_lib.c | 4 ++++
>> > 2 files changed, 5 insertions(+), 1 deletions(-)
>> >
>> > diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
>> > index 32d0b87..93e6ce5 100644
>> > --- a/drivers/md/dm-mpath.c
>> > +++ b/drivers/md/dm-mpath.c
>> > @@ -1214,7 +1214,7 @@ static int do_end_io(struct multipath *m, struct request *clone,
>> > if (!error && !clone->errors)
>> > return 0; /* I/O complete */
>> >
>> > - if (error == -EOPNOTSUPP)
>> > + if (error == -EOPNOTSUPP || error == -EACCES)
>> > return error;
>> >
>> > if (mpio->pgpath)
>> > diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
>> > index 1086552..5635035 100644
>> > --- a/drivers/scsi/scsi_lib.c
>> > +++ b/drivers/scsi/scsi_lib.c
>> > @@ -797,6 +797,10 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
>> > * happens.
>> > */
>> > action = ACTION_RETRY;
>> > + else if (status_byte(cmd->result) == RESERVATION_CONFLICT) {
>> > + error = -EACCES;
>> > + description = "Could not access device";
>> > + action = ACTION_FAIL;
>> > } else if (sense_valid && !sense_deferred) {
>> > switch (sshdr.sense_key) {
>> > case UNIT_ATTENTION:
>> > --
>> > 1.6.2.2
>>
>> Hi Mike,
>>
>> Just a reminder that Hannes has proposed a slightly different approach
>> (returning -EREMOTEIO instead of -EACCES). Here is the version of
>> Hannes' patch that I reviewed/rebased/tweaked last week:
>> https://patchwork.kernel.org/patch/384612/
>>
>> (NOTE: the scsi_decide_disposition() change relative to
>> RESERVATION_CONFLICT).
>>
>> And here is the corresponding DM mpath change:
>> https://patchwork.kernel.org/patch/384602/
>>
>> If you agree with this approach your ack would be appreciated.
>>
>> Thanks,
>> Mike
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
More information about the dm-devel
mailing list