[dm-devel] multipathd: 8:80 mark as failed - BUG: unable to handle kernel NULL pointer dereference at (null)

Roberto Giordani r.giordani at libero.it
Wed Jun 6 15:05:40 UTC 2012


Hello,
I've got the same error re-building the last version of multipath-tools
from source
Could someone fix the problem?

/[1305052.764077]  rport-4:0-1: blocked FC remote port time out:
removing target and saving binding
[1305052.764136] sd 4:0:1:0: [sdh] Unhandled error code
[1305052.764140] sd 4:0:1:0: [sdh]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.764145] sd 4:0:1:0: [sdh] CDB: Write(10): 2a 00 0c 2e c1 f0 00
00 08 00
[1305052.764154] end_request: I/O error, dev sdh, sector 204390896
[1305052.764171] sd 4:0:1:0: [sdh] Unhandled error code
[1305052.764173] sd 4:0:1:0: [sdh]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.764176] sd 4:0:1:0: [sdh] CDB: Write(10): 2a 00 00 03 e1 58 00
00 08 00
[1305052.764184] end_request: I/O error, dev sdh, sector 254296
[1305052.764190] sd 4:0:1:0: [sdh] Unhandled error code
[1305052.764192] sd 4:0:1:0: [sdh]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.764196] sd 4:0:1:0: [sdh] CDB: Write(10): 2a 00 00 03 e1 68 00
00 08 00
[1305052.764203] end_request: I/O error, dev sdh, sector 254312
[1305052.764209] device-mapper: multipath: Failing path 8:112.
[1305052.764232] sd 4:0:1:0: [sdh] Unhandled error code
[1305052.764235] sd 4:0:1:0: [sdh]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.764240] sd 4:0:1:0: [sdh] CDB: Write(10): 2a 00 05 09 c3 38 00
00 08 00
[1305052.764249] end_request: I/O error, dev sdh, sector 84525880
[1305052.764260] sd 4:0:1:0: [sdh] Unhandled error code
[1305052.764262] sd 4:0:1:0: [sdh]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.764265] sd 4:0:1:0: [sdh] CDB: Write(10): 2a 00 06 3d da 38 00
00 08 00
[1305052.764272] end_request: I/O error, dev sdh, sector 104716856
[1305052.764277] sd 4:0:1:0: [sdh] Unhandled error code
[1305052.764279] sd 4:0:1:0: [sdh]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.764282] sd 4:0:1:0: [sdh] CDB: Write(10): 2a 00 06 3d da 70 00
00 08 00
[1305052.764290] end_request: I/O error, dev sdh, sector 104716912
[1305052.764349]  rport-4:0-0: blocked FC remote port time out: removing
target and saving binding
[1305052.792192] sd 4:0:1:0: [sdh] Synchronizing SCSI cache
[1305052.792269] sd 4:0:1:0: [sdh]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.820160] sd 4:0:1:1: [sdi] Synchronizing SCSI cache
[1305052.820198] sd 4:0:1:1: [sdi]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.852156] sd 4:0:0:0: [sdf] Synchronizing SCSI cache
[1305052.852194] sd 4:0:0:0: [sdf]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.884149] sd 4:0:0:1: [sdg] Synchronizing SCSI cache
[1305052.884185] sd 4:0:0:1: [sdg]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.892080]  rport-3:0-0: blocked FC remote port time out: removing
target and saving binding
[1305052.892120] sd 3:0:0:0: [sdb] Unhandled error code
[1305052.892129] sd 3:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.892135] sd 3:0:0:0: [sdb] CDB: Write(10): 2a 00 07 22 27 70 00
00 20 00
[1305052.892147] end_request: I/O error, dev sdb, sector 119678832
[1305052.892164] sd 3:0:0:0: [sdb] Unhandled error code
[1305052.892166] sd 3:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.892169] sd 3:0:0:0: [sdb] CDB: Write(10): 2a 00 0c 2f 1b 90 00
00 08 00
[1305052.892177] end_request: I/O error, dev sdb, sector 204413840
[1305052.892186] sd 3:0:0:0: [sdb] Unhandled error code
[1305052.892189] sd 3:0:0:0: [sdb] Unhandled error code
[1305052.892193] sd 3:0:0:0: [sdb] 
[1305052.892195] sd 3:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.892199] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[1305052.892203] sd 3:0:0:0: [sdb] CDB:
[1305052.892205] sd 3:0:0:0: [sdb] CDB: Write(10)Write(10): 2a: 00 00 03
2a e1 60 00 00 00 08 00
[1305052.892226]  05
[1305052.892228] end_request: I/O error, dev sdb, sector 254304
[1305052.892231]  09 c3 40 00 00 28 00
[1305052.892236] end_request: I/O error, dev sdb, sector 84525888
[1305052.892239] sd 3:0:0:0: [sdb] Unhandled error code
[1305052.892242] sd 3:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.892246] sd 3:0:0:0: [sdb] CDB: Write(10): 2a 00 00 03 e1 68
[1305052.892253] sd 3:0:0:0: [sdb] Unhandled error code
[1305052.892255]  00
[1305052.892258] sd 3:0:0:0: [sdb]   00 08 00
[1305052.892262] end_request: I/O error, dev sdb, sector 254312
[1305052.892266] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[1305052.892268] sd 3:0:0:0: [sdb] CDB: Write(10): 2a 00 06 3d
[1305052.892274] sd 3:0:0:0: [sdb] Unhandled error code
[1305052.892276]  da
[1305052.892279] sd 3:0:0:0: [sdb]   48 00 00Result:
hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[1305052.892286]  08
[1305052.892288] sd 3:0:0:0: [sdb] CDB:  00
[1305052.892293] end_request: I/O error, dev sdb, sector 104716872
[1305052.892295] Write(10): 2a 00 00 03 e1 58 00 00
[1305052.892302] sd 3:0:0:0: [sdb] Unhandled error code
[1305052.892304]  08
[1305052.892308] sd 3:0:0:0: [sdb]   00
[1305052.892311] end_request: I/O error, dev sdb, sector 254296
[1305052.892314] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[1305052.892317] sd 3:0:0:0: [sdb] CDB: Write(10): 2a 00 06 3d
[1305052.892322] sd 3:0:0:0: [sdb] Unhandled error code
[1305052.892324]  da
[1305052.892326] sd 3:0:0:0: [sdb]   78Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.892333]  00
[1305052.892335] sd 3:0:0:0: [sdb] CDB:  00Write(10): 2a 08 00 0c 2e c1
00 f0 00 00
[1305052.892349]  08
[1305052.892353] end_request: I/O error, dev sdb, sector 104716920
[1305052.892354]  00
[1305052.892358] end_request: I/O error, dev sdb, sector 204390896
[1305052.892364] sd 3:0:0:0: [sdb] Unhandled error code
[1305052.892366] sd 3:0:0:0: [sdb] 
[1305052.892367] device-mapper: multipath: Failing path 8:16.
[1305052.892371] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[1305052.892373] sd 3:0:0:0: [sdb] CDB: Write(10): 2a 00 06 3d da 70 00
00 08 00
[1305052.892381] end_request: I/O error, dev sdb, sector 104716912
[1305052.892388] sd 3:0:0:0: [sdb] Unhandled error code
[1305052.892390]  rport-3:0-1: blocked FC remote port time out: removing
target and saving binding
[1305052.892394] sd 3:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.892398] sd 3:0:0:0: [sdb] CDB: Write(10): 2a 00 06 3d da 38 00
00 08 00
[1305052.892405] end_request: I/O error, dev sdb, sector 104716856
[1305052.892415] sd 3:0:0:0: [sdb] Unhandled error code
[1305052.892417] sd 3:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.892420] sd 3:0:0:0: [sdb] CDB: Write(10): 2a 00 05 09 c3 38 00
00 08 00
[1305052.892427] end_request: I/O error, dev sdb, sector 84525880
[1305052.892732] device-mapper: multipath: Failing path 8:16.
[1305052.892796] device-mapper: multipath: Failing path 8:48.
[1305052.892813] scsi 4:0:0:0: rejecting I/O to dead device
[1305052.892818] device-mapper: multipath: Failing path 8:80.
[1305052.894120] device-mapper: multipath: Failing path 8:16.
[1305052.894165] device-mapper: multipath: Failing path 8:48.
[1305052.894178] scsi 4:0:0:0: rejecting I/O to dead device
[1305052.894182] device-mapper: multipath: Failing path 8:80.
[1305052.900596] device-mapper: multipath: adding disabled device 8:96
[1305052.900940] BUG: unable to handle kernel NULL pointer dereference
at           (null)
[1305052.900958] IP: [<ffffffffa08dfa63>]
dm_set_device_limits+0x23/0x140 [dm_mod]
[1305052.900977] PGD 34ff23067 PUD 350859067 PMD 0
[1305052.900984] Oops: 0000 [#1] SMP
[1305052.900989] last sysfs file: /sys/module/scsi_dh_rdac/initstate
[1305052.900994] CPU 3
[1305052.900996] Modules linked in: loop ocfs2 ocfs2_nodemanager
quota_tree ocfs2_stack_user ocfs2_stackglue dlm configfs nbd usbbk netbk
blkbk blkback_pagemap blktap domctl xenbus_be gntdev evtchn bridge stp
llc bonding edd ext4 jbd2 crc16 scsi_dh_rdac dm_round_robin dm_multipath
scsi_dh dm_mod ibmpex ibmaem i5k_amb iTCO_wdt ses iTCO_vendor_support
enclosure e1000e sg ipmi_msghandler bnx2 sr_mod i2c_i801 pcspkr
ics932s401 joydev serio_raw ioatdma i5000_edac 8250_pnp edac_core 8250
serial_core button shpchp pci_hotplug reiserfs usbhid hid uhci_hcd
radeon ttm drm_kms_helper drm i2c_algo_bit ehci_hcd usbcore i2c_core
qla2xxx xenblk cdrom xennet fan processor ata_generic thermal
thermal_sys hwmon aacraid
[1305052.901095]
[1305052.901099] Pid: 2952, comm: multipathd Not tainted
2.6.37.6-0.9-xen #1 IBM IBM System x3650 -[7979AC1]-/System Planar
[1305052.901109] RIP: e030:[<ffffffffa08dfa63>]  [<ffffffffa08dfa63>]
dm_set_device_limits+0x23/0x140 [dm_mod]
[1305052.901119] RSP: e02b:ffff88034b8a1c78  EFLAGS: 00010296
[1305052.901124] RAX: ffff8802dff306f8 RBX: ffff8802a6504940 RCX:
0000000000200000
[1305052.901128] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
ffffc9000003e040
[1305052.901133] RBP: ffffc9000003e040 R08: ffff88034b8a1d58 R09:
0000000000000200
[1305052.901138] R10: 0000000000000008 R11: 00003ffffffff000 R12:
ffff8802dff306f8
[1305052.901143] R13: 0000000000000000 R14: ffff88034b8a1d58 R15:
ffff8802dff306c0
[1305052.901152] FS:  00007f4856b6b700(0000) GS:ffff8803602f5000(0000)
knlGS:0000000000000000
[1305052.901157] CS:  e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[1305052.901161] CR2: 0000000000000000 CR3: 000000034da6f000 CR4:
0000000000042660
[1305052.901166] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[1305052.901171] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[1305052.901176] Process multipathd (pid: 2952, threadinfo
ffff88034b8a0000, task ffff8803508b84c0)
[1305052.901181] Stack:
[1305052.901183]  00000000000000d2 ffff880351c50b80 ffff88034b8a1cc8
0000000000000003
[1305052.901191]  ffff880351c50bf0 0000000000000001 ffff880351c50ba0
ffffffff8005e61f
[1305052.901199]  ffff88034b8a1ce8 ffffffff8002e082 ffff8802a6504940
ffffc9000003e040
[1305052.901206] Call Trace:
[1305052.901236]  [<ffffffffa0903425>]
multipath_iterate_devices+0x55/0x80 [dm_multipath]
[1305052.901248]  [<ffffffffa08e082c>]
dm_calculate_queue_limits+0x8c/0x130 [dm_mod]
[1305052.901268]  [<ffffffffa08de73b>] dm_swap_table+0x6b/0x90 [dm_mod]
[1305052.901285]  [<ffffffffa08e3048>] do_resume+0x88/0x1b0 [dm_mod]
[1305052.901309]  [<ffffffffa08e3e6c>] ctl_ioctl+0x1ac/0x250 [dm_mod]
[1305052.901335]  [<ffffffffa08e3f1e>] dm_ctl_ioctl+0xe/0x20 [dm_mod]
[1305052.901360]  [<ffffffff8012da89>] do_vfs_ioctl+0x89/0x340
[1305052.901369]  [<ffffffff8012ddc0>] sys_ioctl+0x80/0xa0
[1305052.901378]  [<ffffffff80007448>] system_call_fastpath+0x16/0x1b
[1305052.901386]  [<00007f48559d7d87>] 0x7f48559d7d87
[1305052.901390] Code: fd ff ff 0f 1f 44 00 00 48 83 ec 78 48 89 6c 24
58 4c 89 64 24 60 48 89 fd 4c 89 6c 24 68 48 89 5c 24 50 49 89 d5 4c 89
74 24 70 <4c> 8b 36 4d 89 c4 49 8b 86 a0 00 00 00 48 8b 98 10 03 00 00 48
[1305052.901441] RIP  [<ffffffffa08dfa63>]
dm_set_device_limits+0x23/0x140 [dm_mod]
[1305052.901451]  RSP <ffff88034b8a1c78>
[1305052.901453] CR2: 0000000000000000
[1305052.902033] ---[ end trace 876924144444c2e5 ]---
[1305052.912171] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
[1305052.912223] sd 3:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.940154] sd 3:0:0:1: [sdc] Synchronizing SCSI cache
[1305052.940194] sd 3:0:0:1: [sdc]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305052.972161] sd 3:0:1:0: [sdd] Synchronizing SCSI cache
[1305052.972201] sd 3:0:1:0: [sdd]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305053.000471] sd 3:0:1:1: [sde] Synchronizing SCSI cache
[1305053.000517] sd 3:0:1:1: [sde]  Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[1305075.677296] scsi 3:0:0:0: Direct-Access     IBM      1726-4xx 
FAStT  0617 PQ: 0 ANSI: 5
[1305075.678081] scsi 3:0:0:0: rdac: LUN 0 (owned)
[1305075.678302] sd 3:0:0:0: Attached scsi generic sg8 type 0
[1305075.678307] sd 3:0:0:0: Embedded Enclosure Device
[1305075.678603] sd 3:0:0:0: Failed to get diagnostic page 0x8000002
[1305075.678609] sd 3:0:0:0: Failed to bind enclosure -19
[1305075.682708] scsi 3:0:0:1: Direct-Access     IBM      1726-4xx 
FAStT  0617 PQ: 0 ANSI: 5
[1305075.683431] scsi 3:0:0:1: rdac: LUN 1 (owned)
[1305075.683598] sd 3:0:0:1: Attached scsi generic sg9 type 0
[1305075.683603] sd 3:0:0:1: Embedded Enclosure Device
[1305075.683894] sd 3:0:0:1: Failed to get diagnostic page 0x8000002
[1305075.683899] sd 3:0:0:1: Failed to bind enclosure -19
[1305075.684399] scsi 3:0:0:31: Direct-Access     IBM      Universal
Xport  0617 PQ: 0 ANSI: 5
[1305075.684541] scsi 3:0:0:31: Attached scsi generic sg10 type 0
[1305075.684547] scsi 3:0:0:31: Embedded Enclosure Device
[1305075.684947] scsi 3:0:0:31: Failed to get diagnostic page 0x8000002
[1305075.684953] scsi 3:0:0:31: Failed to bind enclosure -19
[1305075.687014] scsi 3:0:1:0: Direct-Access     IBM      1726-4xx 
FAStT  0617 PQ: 0 ANSI: 5
[1305075.687783] scsi 3:0:1:0: rdac: LUN 0 (unowned)
[1305075.687943] sd 3:0:1:0: Attached scsi generic sg11 type 0
[1305075.687948] sd 3:0:1:0: Embedded Enclosure Device
[1305075.688238] sd 3:0:1:0: Failed to get diagnostic page 0x8000002
[1305075.688244] sd 3:0:1:0: Failed to bind enclosure -19
[1305075.692346] scsi 3:0:1:1: Direct-Access     IBM      1726-4xx 
FAStT  0617 PQ: 0 ANSI: 5
[1305075.693079] scsi 3:0:1:1: rdac: LUN 1 (unowned)
[1305075.693246] sd 3:0:1:1: Attached scsi generic sg12 type 0
[1305075.693252] sd 3:0:1:1: Embedded Enclosure Device
[1305075.693539] sd 3:0:1:1: Failed to get diagnostic page 0x8000002
[1305075.693544] sd 3:0:1:1: Failed to bind enclosure -19
[1305075.694050] scsi 3:0:1:31: Direct-Access     IBM      Universal
Xport  0617 PQ: 0 ANSI: 5
[1305075.694189] scsi 3:0:1:31: Attached scsi generic sg13 type 0
[1305075.694194] scsi 3:0:1:31: Embedded Enclosure Device
[1305075.694435] scsi 3:0:1:31: Failed to get diagnostic page 0x8000002
[1305075.694440] scsi 3:0:1:31: Failed to bind enclosure -19
[1305075.959132] scsi 4:0:0:0: Direct-Access     IBM      1726-4xx 
FAStT  0617 PQ: 0 ANSI: 5
[1305075.959882] scsi 4:0:0:0: rdac: LUN 0 (unowned)
[1305075.960040] sd 4:0:0:0: Attached scsi generic sg14 type 0
[1305075.960045] sd 4:0:0:0: Embedded Enclosure Device
[1305101.808015] sd 4:0:0:0: [sdm] 419430400 512-byte logical blocks:
(214 GB/200 GiB)
[1305101.872834] sd 3:0:1:0: [sdk] 419430400 512-byte logical blocks:
(214 GB/200 GiB)
[1305101.872877] sd 3:0:1:1: [sdl] 2097152 512-byte logical blocks:
(1.07 GB/1.00 GiB)
[1305102.271209] sd 4:0:0:0: FIXME driver has no support for
subenclosures (1)
[1305102.271215] sd 4:0:0:0: Failed to bind enclosure -12
[1305102.611904] sd 4:0:0:0: [sdm] Write Protect is off
[1305102.611911] sd 4:0:0:0: [sdm] Mode Sense: 77 00 10 08
[1305102.612703] sd 3:0:1:0: [sdk] Write Protect is off
[1305102.612709] sd 3:0:1:0: [sdk] Mode Sense: 77 00 10 08
[1305102.613301] sd 3:0:1:1: [sdl] Write Protect is off
[1305102.613306] sd 3:0:1:1: [sdl] Mode Sense: 77 00 10 08
[1305102.619332] scsi 4:0:0:1: Direct-Access     IBM      1726-4xx 
FAStT  0617 PQ: 0 ANSI: 5
[1305102.630371] sd 4:0:0:0: [sdm] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[1305102.631386] sd 3:0:1:0: [sdk] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[1305102.631913] sd 3:0:1:1: [sdl] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[1305102.640628] scsi 4:0:0:1: rdac: LUN 1 (unowned)
[1305102.640812] sd 4:0:0:1: Attached scsi generic sg15 type 0
[1305102.640818] sd 4:0:0:1: Embedded Enclosure Device
[1305102.641607] sd 4:0:0:1: Failed to get diagnostic page 0x8000002
[1305102.641613] sd 4:0:0:1: Failed to bind enclosure -19
[1305102.645460] sd 4:0:0:1: [sdn] 2097152 512-byte logical blocks:
(1.07 GB/1.00 GiB)
[1305102.646522] scsi 4:0:0:31: Direct-Access     IBM      Universal
Xport  0617 PQ: 0 ANSI: 5
[1305102.646667] scsi 4:0:0:31: Attached scsi generic sg16 type 0
[1305102.646672] scsi 4:0:0:31: Embedded Enclosure Device
[1305102.646991] scsi 4:0:0:31: Failed to get diagnostic page 0x8000002
[1305102.646996] scsi 4:0:0:31: Failed to bind enclosure -19
[1305102.649006] scsi 4:0:1:0: Direct-Access     IBM      1726-4xx 
FAStT  0617 PQ: 0 ANSI: 5
[1305102.649798] scsi 4:0:1:0: rdac: LUN 0 (owned)
[1305102.649955] sd 4:0:1:0: Attached scsi generic sg17 type 0
[1305102.649960] sd 4:0:1:0: Embedded Enclosure Device
[1305102.650256] sd 4:0:1:0: Failed to get diagnostic page 0x8000002
[1305102.650262] sd 4:0:1:0: Failed to bind enclosure -19
[1305102.650911] ldm_validate_partition_table(): Disk read failed.
[1305102.651058]  sdm: unable to read partition table
[1305102.651271] ldm_validate_partition_table(): Disk read failed.
[1305102.651367]  sdk: unable to read partition table
[1305102.652210] ldm_validate_partition_table(): Disk read failed.
[1305102.652396]  sdl: unable to read partition table
[1305102.654198] sd 4:0:0:1: [sdn] Write Protect is off
[1305102.654204] sd 4:0:0:1: [sdn] Mode Sense: 77 00 10 08
[1305102.655670] scsi 4:0:1:1: Direct-Access     IBM      1726-4xx 
FAStT  0617 PQ: 0 ANSI: 5
[1305102.656607] scsi 4:0:1:1: rdac: LUN 1 (owned)
[1305102.656788] sd 4:0:1:1: Attached scsi generic sg18 type 0
[1305102.656793] sd 4:0:1:1: Embedded Enclosure Device
[1305102.662167] sd 4:0:0:1: [sdn] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[1305102.671906] sd 4:0:0:0: [sdm] Attached SCSI disk
[1305102.672552] sd 3:0:1:0: [sdk] Attached SCSI disk
[1305102.673432] sd 3:0:1:1: [sdl] Attached SCSI disk
[1305102.678241] ldm_validate_partition_table(): Disk read failed.
[1305102.678400]  sdn: unable to read partition table
[1305102.689860] sd 4:0:0:1: [sdn] Attached SCSI disk
[1305108.125254] sd 3:0:0:0: [sdh] 419430400 512-byte logical blocks:
(214 GB/200 GiB)
[1305108.125705] sd 3:0:0:1: [sdj] 2097152 512-byte logical blocks:
(1.07 GB/1.00 GiB)
[1305108.266072] sd 4:0:1:0: [sdo] 419430400 512-byte logical blocks:
(214 GB/200 GiB)
[1305108.266480] sd 4:0:1:1: [sdp] 2097152 512-byte logical blocks:
(1.07 GB/1.00 GiB)
[1305108.731755] sd 4:0:1:1: FIXME driver has no support for
subenclosures (1)
[1305108.731762] sd 4:0:1:1: Failed to bind enclosure -12
[1305108.764199] sd 3:0:0:0: [sdh] Write Protect is off
[1305108.764205] sd 3:0:0:0: [sdh] Mode Sense: 77 00 10 08
[1305108.769141] sd 3:0:0:1: [sdj] Write Protect is off
[1305108.769147] sd 3:0:0:1: [sdj] Mode Sense: 77 00 10 08
[1305108.851705] scsi 4:0:1:31: Direct-Access     IBM      Universal
Xport  0617 PQ: 0 ANSI: 5
[1305108.851883] scsi 4:0:1:31: Attached scsi generic sg19 type 0
[1305108.851888] scsi 4:0:1:31: Embedded Enclosure Device
[1305108.856095] scsi 4:0:1:31: Failed to get diagnostic page 0x8000002
[1305108.856113] scsi 4:0:1:31: Failed to bind enclosure -19
[1305108.876907] sd 4:0:1:0: [sdo] Write Protect is off
[1305108.876914] sd 4:0:1:0: [sdo] Mode Sense: 77 00 10 08
[1305108.881430] sd 4:0:1:1: [sdp] Write Protect is off
[1305108.881436] sd 4:0:1:1: [sdp] Mode Sense: 77 00 10 08
[1305108.888954] sd 3:0:0:0: [sdh] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[1305108.893101] sd 3:0:0:1: [sdj] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[1305108.916079] sd 4:0:1:0: [sdo] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[1305108.916449] sd 4:0:1:1: [sdp] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[1305109.004797]  sdo: sdo1
[1305109.004972]  sdh: sdh1
[1305109.009478]  sdp: sdp1
[1305109.009634]  sdj: sdj1
[1305109.060643] sd 4:0:1:0: [sdo] Attached SCSI disk
[1305109.060751] sd 3:0:0:0: [sdh] Attached SCSI disk
[1305109.069406] sd 4:0:1:1: [sdp] Attached SCSI disk
[1305109.069544] sd 3:0:0:1: [sdj] Attached SCSI disk
[1751443.072336] sd 3:0:0:0: [sdh] Warning! Received an indication that
the operating parameters on this target have changed. The Linux SCSI
layer does not automatically adjust these parameters.
[1751443.074443] sd 3:0:0:1: [sdj] Warning! Received an indication that
the operating parameters on this target have changed. The Linux SCSI
layer does not automatically adjust these parameters.
[1751443.076799] sd 4:0:1:0: [sdo] Warning! Received an indication that
the operating parameters on this target have changed. The Linux SCSI
layer does not automatically adjust these parameters.
[1751443.078805] sd 4:0:1:1: [sdp] Warning! Received an indication that
the operating parameters on this target have changed. The Linux SCSI
layer does not automatically adjust these parameters./


Regards,
Roberto.

 
On 05/21/2012 04:52 PM, Roberto Giordani wrote:
> Hello,
> if you can update OpenSUSE 12.1 there default package crash if you try
> to start, I'll be very happy. :-)
>
> Is there a multipath-tools version that I can download it with git?
>
> Regards,
> Roberto.
>
> On 05/17/2012 11:56 AM, Roberto Giordani wrote:
>> Hello,
>> I've compiled and installed on January on Opensuse 11.4 x64 from
>> git://git.kernel.org/pub/scm/linux/storage/multipath/hare/multipath-tools.git
>> the multipath-tools but previous 14 of May the module hang as
>> described below.
>> Now I've got
>> git-clone -b sles11-sp2
>> git://git.kernel.org/pub/scm/linux/storage/multipath/hare/multipath-tools.git
>> .
>> and reinstalled, but I'd like to know if this problem was already
>> resolved.
>>
>> Regards,
>> Roberto.
> >Yeah, sorry, I need to update multipath-tools for OpenSUSE 11.4
> >onwards. Working on it.
>
> >Cheers,
>
> >Hannes
> >--
> >Dr. Hannes Reinecke              zSeries & Storage
> >ha... at suse.de                  +49 911 74053 688
> >SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
> >GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/dm-devel/attachments/20120606/39216b70/attachment.htm>


More information about the dm-devel mailing list