[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [dm-devel] [PATCH] multipath: rport tmo cleanup



On jeu., 2013-07-25 at 16:32 -0500, Benjamin Marzinski wrote:
> The current code to set fast_io_fail_tmo and dev_loss_tmo fails
> if you want to set fast_io_fail_tmo from "off" to 600. Also,
> it often unnecessarily sets dev_loss_tmo to itself before setting
> it to the final value. This patch cleans up these issues.
> 
Hannes, do you ack this patch over your work on this topic ?

Benjamin, do you want to rebase the patchset you sent on June 29th
before I release 0.5.0 ?

Best regards,
Christophe Varoqui
www.opensvc.com


> Signed-off-by: Benjamin Marzinski <bmarzins redhat com>
> ---
>  libmultipath/discovery.c |   79 ++++++++++++++++++++++++-----------------------
>  1 file changed, 42 insertions(+), 37 deletions(-)
> 
> Index: multipath-tools-130724/libmultipath/discovery.c
> ===================================================================
> --- multipath-tools-130724.orig/libmultipath/discovery.c
> +++ multipath-tools-130724/libmultipath/discovery.c
> @@ -322,9 +322,12 @@ sysfs_set_rport_tmo(struct multipath *mp
>  	struct udev_device *rport_dev = NULL;
>  	char value[16];
>  	char rport_id[32];
> -	unsigned long long tmo = 0;
> +	int delay_fast_io_fail = 0;
> +	int current_dev_loss = 0;
>  	int ret;
>  
> +	if (!mpp->dev_loss && mpp->fast_io_fail == MP_FAST_IO_FAIL_UNSET)
> +		return;
>  	sprintf(rport_id, "rport-%d:%d-%d",
>  		pp->sg_id.host_no, pp->sg_id.channel, pp->sg_id.transport_id);
>  	rport_dev = udev_device_new_from_subsystem_sysname(conf->udev,
> @@ -337,22 +340,8 @@ sysfs_set_rport_tmo(struct multipath *mp
>  	condlog(4, "target%d:%d:%d -> %s", pp->sg_id.host_no,
>  		pp->sg_id.channel, pp->sg_id.scsi_id, rport_id);
>  
> -	/*
> -	 * This is tricky.
> -	 * dev_loss_tmo will be limited to 600 if fast_io_fail
> -	 * is _not_ set.
> -	 * fast_io_fail will be limited by the current dev_loss_tmo
> -	 * setting.
> -	 * So to get everything right we first need to increase
> -	 * dev_loss_tmo to the fast_io_fail setting (if present),
> -	 * then set fast_io_fail, and _then_ set dev_loss_tmo
> -	 * to the correct value.
> -	 */
>  	memset(value, 0, 16);
> -	if (mpp->fast_io_fail != MP_FAST_IO_FAIL_UNSET &&
> -	    mpp->fast_io_fail != MP_FAST_IO_FAIL_ZERO &&
> -	    mpp->fast_io_fail != MP_FAST_IO_FAIL_OFF) {
> -		/* Check if we need to temporarily increase dev_loss_tmo */
> +	if (mpp->fast_io_fail != MP_FAST_IO_FAIL_UNSET) {
>  		ret = sysfs_attr_get_value(rport_dev, "dev_loss_tmo",
>  					   value, 16);
>  		if (ret <= 0) {
> @@ -360,38 +349,40 @@ sysfs_set_rport_tmo(struct multipath *mp
>  				"error %d", rport_id, -ret);
>  			goto out;
>  		}
> -		if (sscanf(value, "%llu\n", &tmo) != 1) {
> +		if (sscanf(value, "%u\n", &current_dev_loss) != 1) {
>  			condlog(0, "%s: Cannot parse dev_loss_tmo "
>  				"attribute '%s'", rport_id, value);
>  			goto out;
>  		}
> -		if (mpp->fast_io_fail >= tmo) {
> -			snprintf(value, 16, "%u", mpp->fast_io_fail + 1);
> -		}
> -	} else if (mpp->dev_loss > 600) {
> -		condlog(3, "%s: limiting dev_loss_tmo to 600, since "
> -			"fast_io_fail is not set", rport_id);
> -		snprintf(value, 16, "%u", 600);
> -	} else {
> -		snprintf(value, 16, "%u", mpp->dev_loss);
> -	}
> -	if (strlen(value)) {
> -		ret = sysfs_attr_set_value(rport_dev, "dev_loss_tmo",
> -					   value, strlen(value));
> -		if (ret <= 0) {
> -			if (ret == -EBUSY)
> -				condlog(3, "%s: rport blocked", rport_id);
> +		if ((mpp->dev_loss &&
> +		     mpp->fast_io_fail >= (int)mpp->dev_loss) ||
> +	            (!mpp->dev_loss &&
> +                     mpp->fast_io_fail >= (int)current_dev_loss)) {
> +			condlog(3, "%s: limiting fast_io_fail_tmo to %d, since "
> +                        	"it must be less than dev_loss_tmo",
> +				rport_id, mpp->dev_loss - 1);
> +			if (mpp->dev_loss)
> +				mpp->fast_io_fail = mpp->dev_loss - 1;
>  			else
> -				condlog(0, "%s: failed to set dev_loss_tmo to %s, error %d",
> -					rport_id, value, -ret);
> -			goto out;
> +				mpp->fast_io_fail = current_dev_loss - 1;
>  		}
> +		if (mpp->fast_io_fail >= (int)current_dev_loss)
> +			delay_fast_io_fail = 1;
> +	}
> +	if (mpp->dev_loss > 600 &&
> +	    (mpp->fast_io_fail == MP_FAST_IO_FAIL_OFF ||
> +             mpp->fast_io_fail == MP_FAST_IO_FAIL_UNSET)) {
> +		condlog(3, "%s: limiting dev_loss_tmo to 600, since "
> +			"fast_io_fail is unset or off", rport_id);
> +		mpp->dev_loss = 600;
>  	}
>  	if (mpp->fast_io_fail != MP_FAST_IO_FAIL_UNSET) {
>  		if (mpp->fast_io_fail == MP_FAST_IO_FAIL_OFF)
>  			sprintf(value, "off");
>  		else if (mpp->fast_io_fail == MP_FAST_IO_FAIL_ZERO)
>  			sprintf(value, "0");
> +		else if (delay_fast_io_fail)
> +			snprintf(value, 16, "%u", current_dev_loss - 1);
>  		else
>  			snprintf(value, 16, "%u", mpp->fast_io_fail);
>  		ret = sysfs_attr_set_value(rport_dev, "fast_io_fail_tmo",
> @@ -402,9 +393,10 @@ sysfs_set_rport_tmo(struct multipath *mp
>  			else
>  				condlog(0, "%s: failed to set fast_io_fail_tmo to %s, error %d",
>  					rport_id, value, -ret);
> +			goto out;
>  		}
>  	}
> -	if (tmo > 0) {
> +	if (mpp->dev_loss) {
>  		snprintf(value, 16, "%u", mpp->dev_loss);
>  		ret = sysfs_attr_set_value(rport_dev, "dev_loss_tmo",
>  					   value, strlen(value));
> @@ -414,6 +406,19 @@ sysfs_set_rport_tmo(struct multipath *mp
>  			else
>  				condlog(0, "%s: failed to set dev_loss_tmo to %s, error %d",
>  					rport_id, value, -ret);
> +			goto out;
> +		}
> +	}
> +	if (delay_fast_io_fail) {
> +		snprintf(value, 16, "%u", mpp->fast_io_fail);
> +		ret = sysfs_attr_set_value(rport_dev, "fast_io_fail_tmo",
> +					   value, strlen(value));
> +		if (ret <= 0) {
> +			if (ret == -EBUSY)
> +				condlog(3, "%s: rport blocked", rport_id);
> +			else
> +				condlog(0, "%s: failed to set fast_io_fail_tmo to %s, error %d",
> +					rport_id, value, -ret);
>  		}
>  	}
>  out:



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]