[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [dm-devel] [PATCH] multipath: change default configuration parameters



On mar., 2013-01-15 at 22:48 +0100, Xose Vazquez Perez wrote:
> On 01/15/2013 10:02 PM, Christophe Varoqui wrote:
> 
> > I pushed a patch to resync the multipath.conf.defaults using the
> > "multipathd show config" output.
> 
> > --- a/multipath.conf.defaults
> > +++ b/multipath.conf.defaults
> > @@ -2,775 +2,863 @@
> >  # overwrite these values in your config file.
> >  
> >  #defaults {
> > -#      udev_dir                /dev
> > -#      polling_interval        5
> > -#      path_selector           "round-robin 0"
> > -#      path_grouping_policy    failover
> > -#      getuid_callout          "/lib/udev/scsi_id --whitelisted --device=/dev/%n"
> > -#      prio                    const
> > -#      prio_args               ""
> > -#      path_checker            directio
> > -#      rr_min_io               1000
> > -#      rr_weight               uniform
> > -#      failback                manual
> > -#      no_path_retry           fail
> > -#      user_friendly_names     no
> > +#      verbosity 2
> > +#      polling_interval 5
> > +#      multipath_dir "/lib64/multipath"
> 
> multipath_dir should be removed, it's generated at compile time.

 True. Applied.



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]