[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [dm-devel] path coalescing in multipath



Hi, 

Could you please send the 'multipath -v3' output ?
‎The coalescing tends to log à lot of useful information there.

Christophe Varoqui
www.opensvc.com
  Message d'origine  
De: Brian Bunker
Envoyé: vendredi 11 avril 2014 19:25
À: device-mapper development
Répondre à: device-mapper development
Objet: [dm-devel] path coalescing in multipath

I have a question about mulitpath and the device mapper that we have not been able to figure out here. We run into problems where a dm device is coalescing paths from LUNs which do not have the same number, or the same underlying serial number using either inquiry page 0x80 or inquiry page 0x83. We see output like this:

[root r12init20 ~]# multipath -l
3624a9370cd8a605eb05916bd00010004 dm-11 PURE,FlashArray
size=500G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=0 status=active
|- 1:0:0:12 sdm 8:192 active undef running
|- 1:0:1:12 sdy 65:128 active undef running
|- 0:0:0:12 sdak 66:64 active undef running
|- 0:0:1:12 sdaw 67:0 active undef running
|- 1:0:1:10 sdw 65:96 active undef running
|- 0:0:0:10 sdai 66:32 active undef running
|- 1:0:0:10 sdk 8:160 active undef running
|- 0:0:1:10 sdau 66:224 active undef running
|- 0:0:2:10 sdbs 68:96 active undef running
|- 1:0:2:10 sdbn 68:16 active undef running
|- 1:0:3:10 sdce 69:32 active undef running
`- 0:0:3:10 sdcq 69:224 active undef running

There are 8 real paths to the device which seem to be all correct. They are the the LUN 10 paths. Why are the LUN 12 paths ending up under this dm device? 

Here is a sample path of LUN 10:
[root r12init20 ~]# sg_inq /dev/sdw
standard INQUIRY:
PQual=0 Device_type=0 RMB=0 version=0x06 [SPC-4]
[AERC=0] [TrmTsk=0] NormACA=1 HiSUP=0 Resp_data_format=2
SCCS=1 ACC=0 TPGS=1 3PC=1 Protect=0 BQue=0
EncServ=0 MultiP=1 (VS=0) [MChngr=0] [ACKREQQ=0] Addr16=0
[RelAdr=0] WBus16=0 Sync=0 Linked=0 [TranDis=0] CmdQue=1
[SPI: Clocking=0x0 QAS=0 IUS=0]
length=96 (0x60) Peripheral device type: disk
Vendor identification: PURE 
Product identification: FlashArray 
Product revision level: 9999
Unit serial number: CD8A605EB05916BD0001000B

Here is a sample path of LUN 12:
[root r12init20 ~]# sg_inq /dev/sdm
standard INQUIRY:
PQual=0 Device_type=0 RMB=0 version=0x06 [SPC-4]
[AERC=0] [TrmTsk=0] NormACA=1 HiSUP=0 Resp_data_format=2
SCCS=1 ACC=0 TPGS=1 3PC=1 Protect=0 BQue=0
EncServ=0 MultiP=1 (VS=0) [MChngr=0] [ACKREQQ=0] Addr16=0
[RelAdr=0] WBus16=0 Sync=0 Linked=0 [TranDis=0] CmdQue=1
[SPI: Clocking=0x0 QAS=0 IUS=0]
length=96 (0x60) Peripheral device type: disk
Vendor identification: PURE 
Product identification: FlashArray 
Product revision level: 9999
Unit serial number: CD8A605EB05916BD00010004

You can see that the LUN serial numbers do not match, the page 0x83 data for these devices are:

[root r12init20 ~]# sg_inq /dev/sdw -p0x83
VPD INQUIRY: Device Identification page
Designation descriptor number 1, descriptor length: 20
designator_type: NAA, code_set: Binary
associated with the addressed logical unit
NAA 6, IEEE Company_id: 0x24a937
Vendor Specific Identifier: 0xcd8a605e
Vendor Specific Identifier Extension: 0xb05916bd0001000b
[0x624a9370cd8a605eb05916bd0001000b]

[root r12init20 ~]# sg_inq /dev/sdm -p0x83
VPD INQUIRY: Device Identification page
Designation descriptor number 1, descriptor length: 20
designator_type: NAA, code_set: Binary
associated with the addressed logical unit
NAA 6, IEEE Company_id: 0x24a937
Vendor Specific Identifier: 0xcd8a605e
Vendor Specific Identifier Extension: 0xb05916bd00010004
[0x624a9370cd8a605eb05916bd00010004]

Under what logic could multipath be coalescing the paths? I initially suspected friendly names since that involved a file lookup that I thought might be causing the problem, but this happens with friendly names off as well, as this example shows.

Is there any debugging level that I could turn on to see where multipath is getting confused? It seems that the target is doing exactly the right thing.

[root r12init20 ~]# modinfo dm_multipath
filename: /lib/modules/2.6.32-431.el6.x86_64/kernel/drivers/md/dm-multipath.ko
license: GPL
author: Sistina Software <dm-devel redhat com>
description: device-mapper multipath target
srcversion: 9A8CF697599A7D9C9CF4BF7
depends: dm-mod
vermagic: 2.6.32-431.el6.x86_64 SMP mod_unload modversions 

device-mapper-multipath.x86_64 0.4.9-72.el6

This will certainly lead to data corruption in this state. I see that there are problems that could happen on boot, but in this case the initiator has not rebooted and gotten itself into this state. 

Thanks,
Brian

Brian Bunker
brian purestorage com




--
dm-devel mailing list
dm-devel redhat com
https://www.redhat.com/mailman/listinfo/dm-devel


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]