[edk2-devel] [PATCH v2 1/4] Platform/RaspberryPi4: Add a basic thermal zone

[Ard Biesheuvel]

On 8/20/20 4:41 PM, Jeremy Linton wrote:
> Hi,
> 
> On 8/20/20 2:59 AM, Ard Biesheuvel wrote:
>> On 8/20/20 6:42 AM, Jeremy Linton wrote:
>>> Rather than exporting the temp sensor or mailbox
>>> in ACPI land we can wrap them in AML and use the default
>>> ACPI drivers provided by the OS. This enables the use of
>>> "sensors" in linux to report the SOC temp.
>>>
>>> This commit also adds a basic passive cooling ACPI thermalzone
>>> with trip points for passive cooling (throttling) handled
>>> by the vc firmware, hibernate and critical shutdown. The
>>> vc apparently kicks in at ~80C, so the hibernate and critical
>>> set points are set at +5 and +10 of that. In the future
>>> CPPC should be able to monitor the thermal throttling.
>>>
>>> Cc: Leif Lindholm <leif at nuviainc.com>
>>> Cc: Pete Batard <pete at akeo.ie>
>>> Cc: Andrei Warkentin <awarkentin at vmware.com>
>>> Cc: Ard Biesheuvel <ard.biesheuvel at arm.com>
>>> Cc: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud at arm.com>
>>> Signed-off-by: Jeremy Linton <jeremy.linton at arm.com>
>>> Reviewed-by: Pete Batard <@pbatard>
>>
>> This looks ok to me but I did not receive patch #4 or the cover letter.
> 
> I appear to have only CCed the groups.io ML on the cover letter and 4th 
> patch (which is just whitespace).
> 
> Can you find them them there? If not I will just resend the whole series 
> as v3.
> 

Mind resending them? Grabbing and applying patches from the web UI is 
not really feasible with the groups.io interface.


> 
>>
>>> ---
>>>   Platform/RaspberryPi/AcpiTables/Dsdt.asl           | 31 
>>> ++++++++++++++++++++++
>>>   .../Bcm27xx/Include/IndustryStandard/Bcm2711.h     |  2 ++
>>>   2 files changed, 33 insertions(+)
>>>
>>> diff --git a/Platform/RaspberryPi/AcpiTables/Dsdt.asl 
>>> b/Platform/RaspberryPi/AcpiTables/Dsdt.asl
>>> index 353af2d876..73067aefd2 100644
>>> --- a/Platform/RaspberryPi/AcpiTables/Dsdt.asl
>>> +++ b/Platform/RaspberryPi/AcpiTables/Dsdt.asl
>>> @@ -252,6 +252,37 @@ DefinitionBlock ("Dsdt.aml", "DSDT", 5, 
>>> "RPIFDN", "RPI", 2)
>>>           }
>>>         })
>>>       }
>>> +
>>> +    // Define a simple thermal zone. The idea here is we compute the 
>>> SOC temp
>>> +    // via a register we can read, and give it to the OS. This 
>>> enables basic
>>> +    // reports from the "sensors" utility, and the OS can then poll 
>>> and take
>>> +    // actions if that temp exceeds any of the given thresholds.
>>> +    Device (EC0)
>>> +    {
>>> +      Name (_HID, EISAID ("PNP0C06"))
>>> +      Name (_CCA, 0x0)
>>> +
>>> +      // all temps in are tenths of K (aka 2732 is the min temps in 
>>> Linux (aka 0C))
>>> +      ThermalZone (TZ0) {
>>> +        Method (_TMP, 0, Serialized) {
>>> +          OperationRegion (TEMS, SystemMemory, THERM_SENSOR, 0x8)
>>> +          Field (TEMS, DWordAcc, NoLock, Preserve) {
>>> +            TMPS, 32
>>> +          }
>>> +          return (((419949 - ((TMPS & 0x3ff) * 487)) / 100) + 2732);
>>> +        }
>>> +        Method (_SCP, 3) { }               // receive cooling policy 
>>> from OS
>>> +
>>> +        Method (_CRT) { Return (3632) }    // (90C) Critical temp 
>>> point (immediate power-off)
>>> +        Method (_HOT) { Return (3582) }    // (85C) HOT state where 
>>> OS should hibernate
>>> +        Method (_PSV) { Return (3532) }    // (80C) Passive cooling 
>>> (CPU throttling) trip point
>>> +
>>> +        // SSDT inserts _AC0/_AL0 @60C here, if a FAN is configured
>>> +
>>> +        Name (_TZP, 10)                   //The OSPM must poll this 
>>> device every 1 seconds
>>> +        Name (_PSL, Package () { \_SB_.CPU0, \_SB_.CPU1, \_SB_.CPU2, 
>>> \_SB_.CPU3 })
>>> +      }
>>> +    }
>>>   #endif
>>>     }
>>> diff --git 
>>> a/Silicon/Broadcom/Bcm27xx/Include/IndustryStandard/Bcm2711.h 
>>> b/Silicon/Broadcom/Bcm27xx/Include/IndustryStandard/Bcm2711.h
>>> index e9c81cafa1..86906b2438 100644
>>> --- a/Silicon/Broadcom/Bcm27xx/Include/IndustryStandard/Bcm2711.h
>>> +++ b/Silicon/Broadcom/Bcm27xx/Include/IndustryStandard/Bcm2711.h
>>> @@ -86,4 +86,6 @@
>>>   #define GENET_BASE_ADDRESS         FixedPcdGet64 
>>> (PcdBcmGenetRegistersAddress)
>>>   #define GENET_LENGTH               0x00010000
>>> +#define THERM_SENSOR               0xfd5d2200
>>> +
>>>   #endif /* BCM2711_H__ */
>>>
>>
> 


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#64675): https://edk2.groups.io/g/devel/message/64675
Mute This Topic: https://groups.io/mt/76302316/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-