[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[edk2-devel] [PATCH v3 1/6] OvmfPkg/ResetVector: convert SEV-ES Reset Block structure to be GUIDed



Convert the current ES reset block structure to an extensible guid
based structure by appending a header and length, which allow for
multiple guid based data packets to be inserted.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3077
Signed-off-by: James Bottomley <jejb linux ibm com>

---

v2: added
v3: reworked
---
 OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 51 +++++++++++++++-----
 1 file changed, 40 insertions(+), 11 deletions(-)

diff --git a/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm b/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
index 980e0138e7fe..9e0a74fddfc1 100644
--- a/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
+++ b/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
@@ -25,21 +25,40 @@ ALIGN   16
     TIMES (0x1000 - ($ - EndOfPageTables) - 0x20) DB 0
 %endif
 
+;
+; Padding to ensure first guid starts at 0xffffffd0
+;
+TIMES (15 - ((guidedStructureEnd - guidedStructureStart + 15) % 16)) DB 0
+
+; GUIDed structure.  To traverse this you should first verify the
+; presence of the table footer guid
+; (96b582de-1fb2-45f7-baea-a366c55a082d) at 0xffffffd0.  If that
+; is found, the two bytes at 0xffffffce are the entire table length.
+;
+; The table is composed of structures with the form:
+;
+; Data (arbitrary bytes identified by guid)
+; length from start of data to end of guid (2 bytes)
+; guid (16 bytes)
+;
+; so work back from the footer using the length to traverse until you
+; either find the guid you're looking for or run off the beginning of
+; the table.
+;
+guidedStructureStart:
+
 ;
 ; SEV-ES Processor Reset support
 ;
 ; sevEsResetBlock:
 ;   For the initial boot of an AP under SEV-ES, the "reset" RIP must be
-;   programmed to the RAM area defined by SEV_ES_AP_RESET_IP. A known offset
-;   and GUID will be used to locate this block in the firmware and extract
-;   the build time RIP value. The GUID must always be 48 bytes from the
-;   end of the firmware.
+;   programmed to the RAM area defined by SEV_ES_AP_RESET_IP. The data
+;   format is:
 ;
-;   0xffffffca (-0x36) - IP value
-;   0xffffffcc (-0x34) - CS segment base [31:16]
-;   0xffffffce (-0x32) - Size of the SEV-ES reset block
-;   0xffffffd0 (-0x30) - SEV-ES reset block GUID
-;                        (00f771de-1a7e-4fcb-890e-68c77e2fb44e)
+;   IP value [0:15]
+;   CS segment base [31:16]
+;
+;   GUID (SEV-ES reset block): 00f771de-1a7e-4fcb-890e-68c77e2fb44e
 ;
 ;   A hypervisor reads the CS segement base and IP value. The CS segment base
 ;   value represents the high order 16-bits of the CS segment base, so the
@@ -48,8 +67,6 @@ ALIGN   16
 ;   program the EIP register with the IP value as read.
 ;
 
-TIMES (32 - (sevEsResetBlockEnd - sevEsResetBlockStart)) DB 0
-
 sevEsResetBlockStart:
     DD      SEV_ES_AP_RESET_IP
     DW      sevEsResetBlockEnd - sevEsResetBlockStart
@@ -57,6 +74,18 @@ sevEsResetBlockStart:
     DB      0x89, 0x0E, 0x68, 0xC7, 0x7E, 0x2F, 0xB4, 0x4E
 sevEsResetBlockEnd:
 
+;
+; Table footer:
+;
+; length of whole table (16 bit word)
+; GUID (table footer): 96b582de-1fb2-45f7-baea-a366c55a082d
+;
+    DW      guidedStructureEnd - guidedStructureStart
+    DB      0xDE, 0x82, 0xB5, 0x96, 0xB2, 0x1F, 0xF7, 0x45
+    DB      0xBA, 0xEA, 0xA3, 0x66, 0xC5, 0x5A, 0x08, 0x2D
+
+guidedStructureEnd:
+
 ALIGN   16
 
 applicationProcessorEntryPoint:
-- 
2.26.2



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#68088): https://edk2.groups.io/g/devel/message/68088
Mute This Topic: https://groups.io/mt/78617838/1813853
Group Owner: devel+owner edk2 groups io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive redhat com]
-=-=-=-=-=-=-=-=-=-=-=-



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]