[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [et-mgmt-tools] dnsmasq (was: Two cobbler feature suggestions (fwd))



On Wed, May 23, 2007 at 05:58:34PM -0400, Michael DeHaan wrote:
> Michael DeHaan wrote:
> >Bryan K. Wright wrote:
> >>Hi folks,
> >>
> >>    Here's a note I sent recently to Michael DeHaan, and his response.
> >>He suggested I forward it to the list.  As he suggests, I'll take a look
> >>at Cobbler's trigger infrastructure and see what would be required
> >>to get Cobbler to play with dnsmasq.
> 
> I've got a rough implementation coded up together on my server now that 
> allows for using dnsmasq instead of ISC.  Works pretty well.
> 
> What you do is set "manage_dhcpd_mode" to "dnsmasq" and then can do 
> things like:
> 
> cobbler system add --name=AA:BB:CC:DD:EE:FF --ip-address=192.168.1.50 
> --hostname=blippy
> 
> I should have something checked in to the repo tomorrow, (default mode = 
> "isc"), though I'm experiencing some problems with routing setup.   If 
> there are any dnsmasq experts who might be able to help debug what's up 
> with the kickstart files not being retrieved, that would prove useful.  
> Basically the system will PXE fine, DHCP works as intended, but the 
> cobbler server address (192.168.1.210 in this case) is apparently not 
> reachable.
> 
> Anyhow, this is pretty close to achieving dynamic DNS management within 
> cobbler.  I like what I see so far.
> 
> If someone knows how to add host entries (DHCP and DNS) into dnsmasq 
> without restart, that would also prove useful -- I see something can be 
> done with polling resolv.conf (nice) but am not sure about the DHCP 
> component.  Right now cobbler is templating out /etc/dnsmasq.conf using 
> /etc/cobbler/dnsmasq.template and reloading the service, much like the 
> way the DHCP management works now.

dnsmasq has a DBus API you can use to control it while running. Never used
it myself, but it sounds like the kinda thing you'd need. Also worth
checking to see if sending the proess a SIGHUP / SIGUSR1 might cause it
to reload its resolv.conf

Dan.
-- 
|=- Red Hat, Engineering, Emerging Technologies, Boston.  +1 978 392 2496 -=|
|=-           Perl modules: http://search.cpan.org/~danberr/              -=|
|=-               Projects: http://freshmeat.net/~danielpb/               -=|
|=-  GnuPG: 7D3B9505   F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505  -=| 


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]