[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: df not showing ext3 partition



I'm running debian unstable too:

snitm soze:~> mount -V
mount: mount-2.11h
snitm soze:~> mount 
/dev/hda3 on / type auto (rw,errors=remount-ro,errors=remount-ro)
proc on /proc type proc (rw)
/dev/hda1 on /boot type ext2 (rw)
snitm soze:~> cat /etc/mtab 
/dev/hda3 / auto rw,errors=remount-ro,errors=remount-ro 0 0
proc /proc proc rw 0 0
/dev/hda1 /boot ext2 rw 0 0
snitm soze:~> cat /proc/mounts | grep ext3
/dev/ide/host0/bus0/target0/lun0/part3 / ext3 rw 0 0

Mike


Theodore Tso (tytso mit edu) said:

> On Tue, Aug 28, 2001 at 11:46:34AM +0100, Stephen C. Tweedie wrote:
> > Hi,
> > 
> > On Mon, Aug 27, 2001 at 11:33:17PM -0600, Curtis Hogg wrote:
> > 
> > > root kei-chan:/usr/src/linux# uname -a
> > > Linux kei-chan 2.2.19ext3 #3 Mon Aug 27 21:44:28 MDT 2001 i586 unknown
> > > 
> > > root kei-chan:/usr/src/linux# mount
> > > /dev/hda3 on / type auto (rw)
> > > /dev/hda1 on /mnt/windows type vfat (rw)
> > > none on /dev/pts type devpts (rw,gid=5,mode=620)
> > > none on /proc type proc (rw)
> > > 
> > > root kei-chan:/usr/src/linux# df
> > > Filesystem           1k-blocks      Used Available Use% Mounted on
> > > /dev/hda1              1048740    885212    163528  85% /mnt/windows
> > 
> > Does using "ext3" instead of "auto" in fstab help?  If so, that's
> > probably something needing updated in fileutils.
> 
> Which version of mount was being used?  I have "auto" in /etc/fstab,
> but what shows up in /etc/mtab (which is what "df" pays attention to)
> is "ext3", not "auto".  (My version of mount is 2.11h, running on a
> Debian testing distribution.)
> 
> 							- Ted
> 
> 
> 
> _______________________________________________
> Ext3-users mailing list
> Ext3-users redhat com
> https://listman.redhat.com/mailman/listinfo/ext3-users





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]