[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: kjounald takes too much cpu



> The problem I have now is similar to previous posts in this list before,
but I
> couldn't find the solution. If the solution is there, please refer me to
> that, and I apologize for not being able to find it.
>
> I recently installed RH7.3, with ext3 fs, on several identical computers.
> The processor is AMD 1900+, the motherboard is ASUS A7V266-C,
> and the hard drive is a Maxtor 40GB, 7200 rpm. 512 MB memory.
>
> The problem appears when I run a large program, that needs to
> dump a lot of data to the disk. "kjournald" starts to take cpu
> and then my program must share the cpu. Consequently,
> my program needs a longer real time tu run.
>
> Is this normal?
> How can I get the ext3 fs to perform as well as the ext2 fs?
> It is necessary to do some 'tuning' on the ext3fs?

  I've hade similar problem. Upgrading kernel from 2.4.18-3 to
2.4.18-5 fixed it.

  Mindaugas






[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]