[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: errors



Hi,

On Mon, Feb 04, 2002 at 11:15:38AM -0800, Steve Lee wrote:

> I've been using ext3 on some of my production servers, I am now
> having some serious issues.  I'm not sure where to pin point this
> to.   
> 
> 1.  I have success using this with a Mylex Raid controller and have
> no problem.  setup as RAID 1.
> 2.  I have success using this with a standalone at all levels 
> single ended SCSI, IDE Drives.  
> 3.  ""  This is where my problem starts  ""
> i'm using a AMI MegaRaid on a JetStore with approximately 8 drives
> that make on big fat 500Gigabyte drive. 
> I have just upgraded this box 3 weeks ago to RedHat 7.2 and converted
> the ext2 filesystem to ext3.  

Well, it's clearly a scsi-layer problem, not a filesystem problem.

> Feb  3 04:05:00 reallyreal kernel: scsi : aborting command due to timeout 
> : pid 0, scsi2, channel 1, id 0, lu
> n 0 Read (10) 00 19 72 fd 57 00 00 38 00

What version of firmware is in the megaraid?  147 was known to be bad.
161 is recommended.

Cheers,
 Stephen





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]