[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: errors



The Raid Controller from what i see is.
Ami v2.03 
Bios Ver 4.13  Nov 15 1999



On Mon, 4 Feb 2002, Stephen C. Tweedie wrote:

> Hi,
> 
> On Mon, Feb 04, 2002 at 11:15:38AM -0800, Steve Lee wrote:
> 
> > I've been using ext3 on some of my production servers, I am now
> > having some serious issues.  I'm not sure where to pin point this
> > to.   
> > 
> > 1.  I have success using this with a Mylex Raid controller and have
> > no problem.  setup as RAID 1.
> > 2.  I have success using this with a standalone at all levels 
> > single ended SCSI, IDE Drives.  
> > 3.  ""  This is where my problem starts  ""
> > i'm using a AMI MegaRaid on a JetStore with approximately 8 drives
> > that make on big fat 500Gigabyte drive. 
> > I have just upgraded this box 3 weeks ago to RedHat 7.2 and converted
> > the ext2 filesystem to ext3.  
> 
> Well, it's clearly a scsi-layer problem, not a filesystem problem.
> 
> > Feb  3 04:05:00 reallyreal kernel: scsi : aborting command due to timeout 
> > : pid 0, scsi2, channel 1, id 0, lu
> > n 0 Read (10) 00 19 72 fd 57 00 00 38 00
> 
> What version of firmware is in the megaraid?  147 was known to be bad.
> 161 is recommended.
> 
> Cheers,
>  Stephen
> 





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]