[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Ext3 and 3ware RAID5



I run a decent amount of 3ware hardware, all under centos-4. There seems to be some sort of fundamental disagreement between ext3 and 3ware's hardware RAID5 mode that trashes write performance. As a representative example, one current setup is 2 9550SX-12 boards in hardware RAID5 mode (256KB stripe size) with a software RAID0 stripe on top (also 256KB chunks). bonnie++ results look like this:

mount -t ext3
175 MB/s writes, 352 MB/s reads

mount -t ext3 -o data=writeback
185 MB/s writes, 254 MB/s reads

mount -t ext2
340 MB writes, 266 MB/s reads

XFS on this hardware gets (untuned) about 300 MB/s writes and 400 MB/s reads. The hardware itself is capable of more, and those results are representative of several different configs of hardware and software RAID options.

Any ideas as to what leads to ext3's performance hit? I've tested *lots* of configurations. It's not the md layer -- 1 card setups see the same performance hit.

Thanks.

--
Joshua Baker-LePain
Department of Biomedical Engineering
Duke University


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]