[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Needed help to fix corrupted ext3 fs



If I would have known it was a logical volume (didn't pay enough attention because I was at work), I wouldn't have suggested what I did.

Anyway, what specifically happens when you boot up? Does it force you to a root prompt or does it boot up but refuse write access?

In any event, the e2fsck -fp should have fixed any minor problems and reported larger ones but failed to do so. What is the entire contents of your /etc/fstab?

..:::BeOS Mr. X:::.. wrote:

Okay, I recieved three usefull replies from these people:
Andreas Dilger adilger clusterfs com
Kevin Strong kstrong criminalinfo net
Johann Lombardi ohann lombardi bull net

Here I attempt to reply to all of them at once. All the suggestions were performed while booted to the Mandriva 2006 cli, in su mode.

Andreas Dilger's suggestion:
e2fsck -fp /dev/VolGroup00/LogVol00

/dev/VolGroup00/LogVol00: 165780/14974976 files (2.8% non-contiguous), 5773411/299253796 blocks

Johann Lombardi's suggestion:
e2fsck on /dev/VolGroup00/LogVol00 instead of /dev/hda3.

done, same suggestion as Andreas.

The most exhaustive work was done with Kevin Strong's suggestions.
send the output of mount /dev/hda3 -oremount,rw

[mntent]: line 2 in /etc/fstab is bad
[mntent]: line 4 in /etc/fstab is bad
[mntent]: line 6 in /etc/fstab is bad
mount: can't find /dev/hda3 in /etc/fstab pr /etc/mtab

df -Tla
Filesytem Type Size Used Avail Use% Mounted on
none proc 0 0 0 - /proc
df: '/proc/bus/usb': No such file or directory
none sysfs 0 0 0 - /sys

cat /proc/ide/hda/settings
name           value      min max   mode
----           -----      --- ---   ----
acoustic       0          0   254   rw
address        1          0   2     rw
bios_cyl       24792      0   65535 rw
bios_head      255        0   255   rw
bios_sect      63         0   63    rw
bswap          0          0   1     rw
current_speed  70         0   70    r
failures       0          0   65535 rw
init_speed     70         0   70    rw
is_32bit       0          0   3     rw
keep settings  0          0   1     rw
lun            0          0   7     rw
max_failures   1          0   65535 rw
mult count     16         0   16    rw
nice1          1          0   1     rw
nowerr         0          0   1     rw
number         0          0   3     rw
pio_mode       write-only 0   255   w
unmaskirq      0          0   1     rw
unsing_dma     1          0   1     rw
wcache         1          0   1     rw

cat /proc/filesystem
nodev sysfs
nodev rootfs
nodev bdev
nodev proc
nodev sockfs
nodev pipfs
nodev tmpfs
nodev inotifyfs
nodev eventpollfs
nodev devpts
      ext2
      cramfs
dodev ramfs
nodev devfs
nodev mqueue
      ext3

cat /proc/ide/hda/driver
ide-disk version 1.18

--------

Now hopefully more progress can be made now that I've given all the required information. Hope you can help!

_______________________________________________
Ext3-users mailing list
Ext3-users redhat com
https://www.redhat.com/mailman/listinfo/ext3-users



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]