[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: filesystem becomming read only



On Jan 28, 2007  16:38 -0600, Tim Rupp wrote:
> I checked to see if it was perhaps bad memory by running memtest86+, but
> after 14 hours no errors were found.

I've heard in the past that you need to run memtest86 for at least a day
or two to be sure about that.  Another option (if you have multiple sticks
of RAM) is to take half of it out, see if the problem still happens (when
running with your reproducer), repeat until you've isolated it to one or
more sticks of RAM.


Cheers, Andreas
--
Andreas Dilger
Principal Software Engineer
Cluster File Systems, Inc.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]