[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

rpms/kernel/FC-4 jwltest-3c59x-misc.patch, NONE, 1.1.12.1 jwltest-3c59x-mmio.patch, NONE, 1.1.20.1 jwltest-acpi-dsdt-initrd.patch, NONE, 1.1.38.1 jwltest-b44-alloc.patch, NONE, 1.1.10.1 jwltest-dma-x86_64.patch, NONE, 1.1.10.1 jwltest-ia64-dma-get-cache-align.patch, NONE, 1.1.10.1 jwltest-sky2.patch, NONE, 1.1.6.1 jwltest-sundance-fixes.patch, NONE, 1.1.18.1 jwltest-via-rhine-update.patch, NONE, 1.1.8.1 jwltest-via-velocity-tx_csum.patch, NONE, 1.1.4.1 kernel-2.6.spec, 1.1520, 1.1520.2.1



Author: linville

Update of /cvs/dist/rpms/kernel/FC-4
In directory cvs.devel.redhat.com:/tmp/cvs-serv12084

Modified Files:
      Tag: private-linville-jwltest-fc4-25-branch
	kernel-2.6.spec 
Added Files:
      Tag: private-linville-jwltest-fc4-25-branch
	jwltest-3c59x-misc.patch jwltest-3c59x-mmio.patch 
	jwltest-acpi-dsdt-initrd.patch jwltest-b44-alloc.patch 
	jwltest-dma-x86_64.patch 
	jwltest-ia64-dma-get-cache-align.patch jwltest-sky2.patch 
	jwltest-sundance-fixes.patch jwltest-via-rhine-update.patch 
	jwltest-via-velocity-tx_csum.patch 
Log Message:


jwltest-3c59x-misc.patch:
 3c59x.c |   33 ++++++++++++++++++---------------
 1 files changed, 18 insertions(+), 15 deletions(-)

--- NEW FILE jwltest-3c59x-misc.patch ---
--- linux-2.6.13/drivers/net/3c59x.c.orig	2005-09-11 16:16:39.612186537 -0400
+++ linux-2.6.13/drivers/net/3c59x.c	2005-09-11 16:18:52.538437848 -0400
@@ -903,12 +903,12 @@ static void set_8021q_mode(struct net_de
 /* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
 /* Option count limit only -- unlimited interfaces are supported. */
 #define MAX_UNITS 8
-static int options[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1,};
-static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int hw_checksums[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int flow_ctrl[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int enable_wol[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int use_mmio[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int options[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 };
+static int full_duplex[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 };
+static int hw_checksums[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 };
+static int flow_ctrl[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 };
+static int enable_wol[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 };
+static int use_mmio[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 };
 static int global_options = -1;
 static int global_full_duplex = -1;
 static int global_enable_wol = -1;
@@ -943,18 +943,18 @@ MODULE_PARM_DESC(debug, "3c59x debug lev
 MODULE_PARM_DESC(options, "3c59x: Bits 0-3: media type, bit 4: bus mastering, bit 9: full duplex");
 MODULE_PARM_DESC(global_options, "3c59x: same as options, but applies to all NICs if options is unset");
 MODULE_PARM_DESC(full_duplex, "3c59x full duplex setting(s) (1)");
-MODULE_PARM_DESC(global_full_duplex, "3c59x: same as full_duplex, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(global_full_duplex, "3c59x: same as full_duplex, but applies to all NICs if full_duplex is unset");
 MODULE_PARM_DESC(hw_checksums, "3c59x Hardware checksum checking by adapter(s) (0-1)");
 MODULE_PARM_DESC(flow_ctrl, "3c59x 802.3x flow control usage (PAUSE only) (0-1)");
 MODULE_PARM_DESC(enable_wol, "3c59x: Turn on Wake-on-LAN for adapter(s) (0-1)");
-MODULE_PARM_DESC(global_enable_wol, "3c59x: same as enable_wol, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(global_enable_wol, "3c59x: same as enable_wol, but applies to all NICs if enable_wol is unset");
 MODULE_PARM_DESC(rx_copybreak, "3c59x copy breakpoint for copy-only-tiny-frames");
 MODULE_PARM_DESC(max_interrupt_work, "3c59x maximum events handled per interrupt");
 MODULE_PARM_DESC(compaq_ioaddr, "3c59x PCI I/O base address (Compaq BIOS problem workaround)");
 MODULE_PARM_DESC(compaq_irq, "3c59x PCI IRQ number (Compaq BIOS problem workaround)");
 MODULE_PARM_DESC(compaq_device_id, "3c59x PCI device ID (Compaq BIOS problem workaround)");
 MODULE_PARM_DESC(watchdog, "3c59x transmit timeout in milliseconds");
-MODULE_PARM_DESC(global_use_mmio, "3c59x: same as use_mmio, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(global_use_mmio, "3c59x: same as use_mmio, but applies to all NICs if use_mmio is unset");
 MODULE_PARM_DESC(use_mmio, "3c59x: use memory-mapped PCI I/O resource (0-1)");
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -1531,9 +1531,11 @@ static int __devinit vortex_probe1(struc
 		dev->hard_start_xmit = boomerang_start_xmit;
 		/* Actually, it still should work with iommu. */
 		dev->features |= NETIF_F_SG;
-		if (((hw_checksums[card_idx] == -1) && (vp->drv_flags & HAS_HWCKSM)) ||
-					(hw_checksums[card_idx] == 1)) {
-				dev->features |= NETIF_F_IP_CSUM;
+		if ((card_idx < MAX_UNITS) &&
+		    (((hw_checksums[card_idx] == -1) &&
+		      (vp->drv_flags & HAS_HWCKSM)) ||
+		     (hw_checksums[card_idx] == 1))) {
+			dev->features |= NETIF_F_IP_CSUM;
 		}
 	} else {
 		dev->hard_start_xmit = vortex_start_xmit;
@@ -2806,9 +2808,10 @@ vortex_close(struct net_device *dev)
 	}
 
 #if DO_ZEROCOPY
-	if (	vp->rx_csumhits &&
-			((vp->drv_flags & HAS_HWCKSM) == 0) &&
-			(hw_checksums[vp->card_idx] == -1)) {
+	if (vp->rx_csumhits &&
+	    ((vp->drv_flags & HAS_HWCKSM) == 0) &&
+	    ((vp->card_idx >= MAX_UNITS) ||
+	     (hw_checksums[vp->card_idx] == -1))) {
 		printk(KERN_WARNING "%s supports hardware checksums, and we're not using them!\n", dev->name);
 	}
 #endif

jwltest-3c59x-mmio.patch:
 3c59x.c |  532 ++++++++++++++++++++++++++++++++++------------------------------
 1 files changed, 284 insertions(+), 248 deletions(-)

--- NEW FILE jwltest-3c59x-mmio.patch ---
--- linux-2.6.13/drivers/net/3c59x.c.orig	2005-09-10 17:18:41.843300468 -0400
+++ linux-2.6.13/drivers/net/3c59x.c	2005-09-10 17:21:29.554911748 -0400
@@ -602,7 +602,7 @@ MODULE_DEVICE_TABLE(pci, vortex_pci_tbl)
    First the windows.  There are eight register windows, with the command
    and status registers available in each.
    */
-#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
+#define EL3WINDOW(win_num) iowrite16(SelectWindow + (win_num), ioaddr + EL3_CMD)
 #define EL3_CMD 0x0e
 #define EL3_STATUS 0x0e
 
@@ -776,7 +776,8 @@ struct vortex_private {
 
 	/* PCI configuration space information. */
 	struct device *gendev;
-	char __iomem *cb_fn_base;		/* CardBus function status addr space. */
+	void __iomem *ioaddr;			/* IO address space */
+	void __iomem *cb_fn_base;		/* CardBus function status addr space. */
 
 	/* Some values here only for performance evaluation and path-coverage */
 	int rx_nocopy, rx_copy, queued_packet, rx_csumhits;
@@ -869,12 +870,12 @@ static struct {
 /* number of ETHTOOL_GSTATS u64's */
 #define VORTEX_NUM_STATS     3
 
-static int vortex_probe1(struct device *gendev, long ioaddr, int irq,
+static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
 				   int chip_idx, int card_idx);
 static void vortex_up(struct net_device *dev);
 static void vortex_down(struct net_device *dev, int final);
 static int vortex_open(struct net_device *dev);
-static void mdio_sync(long ioaddr, int bits);
+static void mdio_sync(void __iomem *ioaddr, int bits);
 static int mdio_read(struct net_device *dev, int phy_id, int location);
 static void mdio_write(struct net_device *vp, int phy_id, int location, int value);
 static void vortex_timer(unsigned long arg);
@@ -887,7 +888,7 @@ static irqreturn_t vortex_interrupt(int 
 static irqreturn_t boomerang_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 static int vortex_close(struct net_device *dev);
 static void dump_tx_ring(struct net_device *dev);
-static void update_stats(long ioaddr, struct net_device *dev);
+static void update_stats(void __iomem *ioaddr, struct net_device *dev);
 static struct net_device_stats *vortex_get_stats(struct net_device *dev);
 static void set_rx_mode(struct net_device *dev);
 #ifdef CONFIG_PCI
@@ -907,9 +908,11 @@ static int full_duplex[MAX_UNITS] = {-1,
 static int hw_checksums[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 static int flow_ctrl[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 static int enable_wol[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int use_mmio[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 static int global_options = -1;
 static int global_full_duplex = -1;
 static int global_enable_wol = -1;
+static int global_use_mmio = -1;
 
 /* #define dev_alloc_skb dev_alloc_skb_debug */
 
@@ -934,6 +937,8 @@ module_param(compaq_ioaddr, int, 0);
 module_param(compaq_irq, int, 0);
 module_param(compaq_device_id, int, 0);
 module_param(watchdog, int, 0);
+module_param(global_use_mmio, int, 0);
+module_param_array(use_mmio, int, NULL, 0);
 MODULE_PARM_DESC(debug, "3c59x debug level (0-6)");
 MODULE_PARM_DESC(options, "3c59x: Bits 0-3: media type, bit 4: bus mastering, bit 9: full duplex");
 MODULE_PARM_DESC(global_options, "3c59x: same as options, but applies to all NICs if options is unset");
@@ -949,6 +954,8 @@ MODULE_PARM_DESC(compaq_ioaddr, "3c59x P
 MODULE_PARM_DESC(compaq_irq, "3c59x PCI IRQ number (Compaq BIOS problem workaround)");
 MODULE_PARM_DESC(compaq_device_id, "3c59x PCI device ID (Compaq BIOS problem workaround)");
 MODULE_PARM_DESC(watchdog, "3c59x transmit timeout in milliseconds");
+MODULE_PARM_DESC(global_use_mmio, "3c59x: same as use_mmio, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(use_mmio, "3c59x: use memory-mapped PCI I/O resource (0-1)");
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void poll_vortex(struct net_device *dev)
@@ -1029,18 +1036,19 @@ static struct eisa_driver vortex_eisa_dr
 
 static int vortex_eisa_probe (struct device *device)
 {
-	long ioaddr;
+	void __iomem *ioaddr;
 	struct eisa_device *edev;
 
 	edev = to_eisa_device (device);
-	ioaddr = edev->base_addr;
 
-	if (!request_region(ioaddr, VORTEX_TOTAL_SIZE, DRV_NAME))
+	if (!request_region(edev->base_addr, VORTEX_TOTAL_SIZE, DRV_NAME))
 		return -EBUSY;
 
-	if (vortex_probe1(device, ioaddr, inw(ioaddr + 0xC88) >> 12,
+	ioaddr = ioport_map(edev->base_addr, VORTEX_TOTAL_SIZE);
+
+	if (vortex_probe1(device, ioaddr, ioread16(ioaddr + 0xC88) >> 12,
 					  edev->id.driver_data, vortex_cards_found)) {
-		release_region (ioaddr, VORTEX_TOTAL_SIZE);
+		release_region (edev->base_addr, VORTEX_TOTAL_SIZE);
 		return -ENODEV;
 	}
 
@@ -1054,7 +1062,7 @@ static int vortex_eisa_remove (struct de
 	struct eisa_device *edev;
 	struct net_device *dev;
 	struct vortex_private *vp;
-	long ioaddr;
+	void __iomem *ioaddr;
 
 	edev = to_eisa_device (device);
 	dev = eisa_get_drvdata (edev);
@@ -1065,11 +1073,11 @@ static int vortex_eisa_remove (struct de
 	}
 
 	vp = netdev_priv(dev);
-	ioaddr = dev->base_addr;
+	ioaddr = vp->ioaddr;
 	
 	unregister_netdev (dev);
-	outw (TotalReset|0x14, ioaddr + EL3_CMD);
-	release_region (ioaddr, VORTEX_TOTAL_SIZE);
+	iowrite16 (TotalReset|0x14, ioaddr + EL3_CMD);
+	release_region (dev->base_addr, VORTEX_TOTAL_SIZE);
 
 	free_netdev (dev);
 	return 0;
@@ -1096,8 +1104,8 @@ static int __init vortex_eisa_init (void
 	
 	/* Special code to work-around the Compaq PCI BIOS32 problem. */
 	if (compaq_ioaddr) {
-		vortex_probe1(NULL, compaq_ioaddr, compaq_irq,
-					  compaq_device_id, vortex_cards_found++);
+		vortex_probe1(NULL, ioport_map(compaq_ioaddr, VORTEX_TOTAL_SIZE),
+			      compaq_irq, compaq_device_id, vortex_cards_found++);
 	}
 
 	return vortex_cards_found - orig_cards_found + eisa_found;
@@ -1107,15 +1115,32 @@ static int __init vortex_eisa_init (void
 static int __devinit vortex_init_one (struct pci_dev *pdev,
 				      const struct pci_device_id *ent)
 {
-	int rc;
+	int rc, unit, pci_bar;
+	struct vortex_chip_info *vci;
+	void __iomem *ioaddr;
 
 	/* wake up and enable device */		
 	rc = pci_enable_device (pdev);
 	if (rc < 0)
 		goto out;
 
-	rc = vortex_probe1 (&pdev->dev, pci_resource_start (pdev, 0),
-						pdev->irq, ent->driver_data, vortex_cards_found);
+	unit = vortex_cards_found;
+
+	if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) {
+		/* Determine the default if the user didn't override us */
+		vci = &vortex_info_tbl[ent->driver_data];
+		pci_bar = vci->drv_flags & (IS_CYCLONE | IS_TORNADO) ? 1 : 0;
+	} else if (unit < MAX_UNITS && use_mmio[unit] >= 0) 
+		pci_bar = use_mmio[unit] ? 1 : 0;
+	else
+		pci_bar = global_use_mmio ? 1 : 0;
+
+	ioaddr = pci_iomap(pdev, pci_bar, 0);
+	if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */
+		ioaddr = pci_iomap(pdev, 0, 0);
+
+	rc = vortex_probe1 (&pdev->dev, pci_iomap(pdev, pci_bar, 0),
+			    pdev->irq, ent->driver_data, unit);
 	if (rc < 0) {
 		pci_disable_device (pdev);
 		goto out;
@@ -1134,7 +1154,7 @@ out:
  * NOTE: pdev can be NULL, for the case of a Compaq device
  */
 static int __devinit vortex_probe1(struct device *gendev,
-				   long ioaddr, int irq,
+				   void __iomem *ioaddr, int irq,
 				   int chip_idx, int card_idx)
 {
 	struct vortex_private *vp;
@@ -1202,15 +1222,16 @@ static int __devinit vortex_probe1(struc
 	if (print_info)
 		printk (KERN_INFO "See Documentation/networking/vortex.txt\n");
 
-	printk(KERN_INFO "%s: 3Com %s %s at 0x%lx. Vers " DRV_VERSION "\n",
+	printk(KERN_INFO "%s: 3Com %s %s at %p. Vers " DRV_VERSION "\n",
 	       print_name,
 	       pdev ? "PCI" : "EISA",
 	       vci->name,
 	       ioaddr);
 
-	dev->base_addr = ioaddr;
+	dev->base_addr = (unsigned long)ioaddr;
 	dev->irq = irq;
 	dev->mtu = mtu;
+	vp->ioaddr = ioaddr;
 	vp->large_frames = mtu > 1500;
 	vp->drv_flags = vci->drv_flags;
 	vp->has_nway = (vci->drv_flags & HAS_NWAY) ? 1 : 0;
@@ -1226,7 +1247,7 @@ static int __devinit vortex_probe1(struc
 	if (pdev) {
 		/* EISA resources already marked, so only PCI needs to do this here */
 		/* Ignore return value, because Cardbus drivers already allocate for us */
-		if (request_region(ioaddr, vci->io_size, print_name) != NULL)
+		if (request_region(dev->base_addr, vci->io_size, print_name) != NULL)
 			vp->must_free_region = 1;
 
 		/* enable bus-mastering if necessary */		
@@ -1316,14 +1337,14 @@ static int __devinit vortex_probe1(struc
 
 		for (i = 0; i < 0x40; i++) {
 			int timer;
-			outw(base + i, ioaddr + Wn0EepromCmd);
+			iowrite16(base + i, ioaddr + Wn0EepromCmd);
 			/* Pause for at least 162 us. for the read to take place. */
 			for (timer = 10; timer >= 0; timer--) {
 				udelay(162);
-				if ((inw(ioaddr + Wn0EepromCmd) & 0x8000) == 0)
+				if ((ioread16(ioaddr + Wn0EepromCmd) & 0x8000) == 0)
 					break;
 			}
-			eeprom[i] = inw(ioaddr + Wn0EepromData);
+			eeprom[i] = ioread16(ioaddr + Wn0EepromData);
 		}
 	}
 	for (i = 0; i < 0x18; i++)
@@ -1351,7 +1372,7 @@ static int __devinit vortex_probe1(struc
 	}
 	EL3WINDOW(2);
 	for (i = 0; i < 6; i++)
-		outb(dev->dev_addr[i], ioaddr + i);
+		iowrite8(dev->dev_addr[i], ioaddr + i);
 
 #ifdef __sparc__
 	if (print_info)
@@ -1366,7 +1387,7 @@ static int __devinit vortex_probe1(struc
 #endif
 
 	EL3WINDOW(4);
-	step = (inb(ioaddr + Wn4_NetDiag) & 0x1e) >> 1;
+	step = (ioread8(ioaddr + Wn4_NetDiag) & 0x1e) >> 1;
 	if (print_info) {
 		printk(KERN_INFO "  product code %02x%02x rev %02x.%d date %02d-"
 			"%02d-%02d\n", eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14],
@@ -1375,31 +1396,30 @@ static int __devinit vortex_probe1(struc
 
 
 	if (pdev && vci->drv_flags & HAS_CB_FNS) {
-		unsigned long fn_st_addr;			/* Cardbus function status space */
 		unsigned short n;
 
-		fn_st_addr = pci_resource_start (pdev, 2);
-		if (fn_st_addr) {
-			vp->cb_fn_base = ioremap(fn_st_addr, 128);
+		vp->cb_fn_base = pci_iomap(pdev, 2, 0);
+		if (!vp->cb_fn_base) {
 			retval = -ENOMEM;
-			if (!vp->cb_fn_base)
-				goto free_ring;
+			goto free_ring;
 		}
+		
 		if (print_info) {
 			printk(KERN_INFO "%s: CardBus functions mapped %8.8lx->%p\n",
-				print_name, fn_st_addr, vp->cb_fn_base);
+				print_name, pci_resource_start(pdev, 2),
+				vp->cb_fn_base);
 		}
 		EL3WINDOW(2);
 
-		n = inw(ioaddr + Wn2_ResetOptions) & ~0x4010;
+		n = ioread16(ioaddr + Wn2_ResetOptions) & ~0x4010;
 		if (vp->drv_flags & INVERT_LED_PWR)
 			n |= 0x10;
 		if (vp->drv_flags & INVERT_MII_PWR)
 			n |= 0x4000;
-		outw(n, ioaddr + Wn2_ResetOptions);
+		iowrite16(n, ioaddr + Wn2_ResetOptions);
 		if (vp->drv_flags & WNO_XCVR_PWR) {
 			EL3WINDOW(0);
-			outw(0x0800, ioaddr);
+			iowrite16(0x0800, ioaddr);
 		}
 	}
 
@@ -1418,13 +1438,13 @@ static int __devinit vortex_probe1(struc
 		static const char * ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
 		unsigned int config;
 		EL3WINDOW(3);
-		vp->available_media = inw(ioaddr + Wn3_Options);
+		vp->available_media = ioread16(ioaddr + Wn3_Options);
 		if ((vp->available_media & 0xff) == 0)		/* Broken 3c916 */
 			vp->available_media = 0x40;
-		config = inl(ioaddr + Wn3_Config);
+		config = ioread32(ioaddr + Wn3_Config);
 		if (print_info) {
 			printk(KERN_DEBUG "  Internal config register is %4.4x, "
-				   "transceivers %#x.\n", config, inw(ioaddr + Wn3_Options));
+				   "transceivers %#x.\n", config, ioread16(ioaddr + Wn3_Options));
 			printk(KERN_INFO "  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
 				   8 << RAM_SIZE(config),
 				   RAM_WIDTH(config) ? "word" : "byte",
@@ -1555,7 +1575,7 @@ free_ring:
 						vp->rx_ring_dma);
 free_region:
 	if (vp->must_free_region)
-		release_region(ioaddr, vci->io_size);
+		release_region(dev->base_addr, vci->io_size);
 	free_netdev(dev);
 	printk(KERN_ERR PFX "vortex_probe1 fails.  Returns %d\n", retval);
 out:
@@ -1565,17 +1585,19 @@ out:
 static void
 issue_and_wait(struct net_device *dev, int cmd)
 {
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
 	int i;
 
-	outw(cmd, dev->base_addr + EL3_CMD);
+	iowrite16(cmd, ioaddr + EL3_CMD);
 	for (i = 0; i < 2000; i++) {
-		if (!(inw(dev->base_addr + EL3_STATUS) & CmdInProgress))
+		if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress))
 			return;
 	}
 
 	/* OK, that didn't work.  Do it the slow way.  One second */
 	for (i = 0; i < 100000; i++) {
-		if (!(inw(dev->base_addr + EL3_STATUS) & CmdInProgress)) {
+		if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) {
 			if (vortex_debug > 1)
 				printk(KERN_INFO "%s: command 0x%04x took %d usecs\n",
 					   dev->name, cmd, i * 10);
@@ -1584,14 +1606,14 @@ issue_and_wait(struct net_device *dev, i
 		udelay(10);
 	}
 	printk(KERN_ERR "%s: command 0x%04x did not complete! Status=0x%x\n",
-			   dev->name, cmd, inw(dev->base_addr + EL3_STATUS));
+			   dev->name, cmd, ioread16(ioaddr + EL3_STATUS));
 }
 
 static void
 vortex_up(struct net_device *dev)
 {
-	long ioaddr = dev->base_addr;
 	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned int config;
 	int i;
 
@@ -1604,7 +1626,7 @@ vortex_up(struct net_device *dev)
 
 	/* Before initializing select the active media port. */
 	EL3WINDOW(3);
-	config = inl(ioaddr + Wn3_Config);
+	config = ioread32(ioaddr + Wn3_Config);
 
 	if (vp->media_override != 7) {
 		printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n",
@@ -1651,7 +1673,7 @@ vortex_up(struct net_device *dev)
 	config = BFINS(config, dev->if_port, 20, 4);
 	if (vortex_debug > 6)
 		printk(KERN_DEBUG "vortex_up(): writing 0x%x to InternalConfig\n", config);
-	outl(config, ioaddr + Wn3_Config);
+	iowrite32(config, ioaddr + Wn3_Config);
 
 	if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
 		int mii_reg1, mii_reg5;
@@ -1679,7 +1701,7 @@ vortex_up(struct net_device *dev)
 	}
 
 	/* Set the full-duplex bit. */
-	outw(	((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) |
+	iowrite16(	((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) |
 		 	(vp->large_frames ? 0x40 : 0) |
 			((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? 0x100 : 0),
 			ioaddr + Wn3_MAC_Ctrl);
@@ -1695,51 +1717,51 @@ vortex_up(struct net_device *dev)
 	 */
 	issue_and_wait(dev, RxReset|0x04);
 
-	outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
+	iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
 
 	if (vortex_debug > 1) {
 		EL3WINDOW(4);
 		printk(KERN_DEBUG "%s: vortex_up() irq %d media status %4.4x.\n",
-			   dev->name, dev->irq, inw(ioaddr + Wn4_Media));
+			   dev->name, dev->irq, ioread16(ioaddr + Wn4_Media));
 	}
 
 	/* Set the station address and mask in window 2 each time opened. */
 	EL3WINDOW(2);
 	for (i = 0; i < 6; i++)
-		outb(dev->dev_addr[i], ioaddr + i);
+		iowrite8(dev->dev_addr[i], ioaddr + i);
 	for (; i < 12; i+=2)
-		outw(0, ioaddr + i);
+		iowrite16(0, ioaddr + i);
 
 	if (vp->cb_fn_base) {
-		unsigned short n = inw(ioaddr + Wn2_ResetOptions) & ~0x4010;
+		unsigned short n = ioread16(ioaddr + Wn2_ResetOptions) & ~0x4010;
 		if (vp->drv_flags & INVERT_LED_PWR)
 			n |= 0x10;
 		if (vp->drv_flags & INVERT_MII_PWR)
 			n |= 0x4000;
-		outw(n, ioaddr + Wn2_ResetOptions);
+		iowrite16(n, ioaddr + Wn2_ResetOptions);
 	}
 
 	if (dev->if_port == XCVR_10base2)
 		/* Start the thinnet transceiver. We should really wait 50ms...*/
-		outw(StartCoax, ioaddr + EL3_CMD);
+		iowrite16(StartCoax, ioaddr + EL3_CMD);
 	if (dev->if_port != XCVR_NWAY) {
 		EL3WINDOW(4);
-		outw((inw(ioaddr + Wn4_Media) & ~(Media_10TP|Media_SQE)) |
+		iowrite16((ioread16(ioaddr + Wn4_Media) & ~(Media_10TP|Media_SQE)) |
 			 media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media);
 	}
 
 	/* Switch to the stats window, and clear all stats by reading. */
-	outw(StatsDisable, ioaddr + EL3_CMD);
+	iowrite16(StatsDisable, ioaddr + EL3_CMD);
 	EL3WINDOW(6);
 	for (i = 0; i < 10; i++)
-		inb(ioaddr + i);
-	inw(ioaddr + 10);
-	inw(ioaddr + 12);
+		ioread8(ioaddr + i);
+	ioread16(ioaddr + 10);
+	ioread16(ioaddr + 12);
 	/* New: On the Vortex we must also clear the BadSSD counter. */
 	EL3WINDOW(4);
-	inb(ioaddr + 12);
+	ioread8(ioaddr + 12);
 	/* ..and on the Boomerang we enable the extra statistics bits. */
-	outw(0x0040, ioaddr + Wn4_NetDiag);
+	iowrite16(0x0040, ioaddr + Wn4_NetDiag);
 
 	/* Switch to register set 7 for normal use. */
 	EL3WINDOW(7);
@@ -1747,30 +1769,30 @@ vortex_up(struct net_device *dev)
 	if (vp->full_bus_master_rx) { /* Boomerang bus master. */
 		vp->cur_rx = vp->dirty_rx = 0;
 		/* Initialize the RxEarly register as recommended. */
-		outw(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD);
-		outl(0x0020, ioaddr + PktStatus);
-		outl(vp->rx_ring_dma, ioaddr + UpListPtr);
+		iowrite16(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD);
+		iowrite32(0x0020, ioaddr + PktStatus);
+		iowrite32(vp->rx_ring_dma, ioaddr + UpListPtr);
 	}
 	if (vp->full_bus_master_tx) { 		/* Boomerang bus master Tx. */
 		vp->cur_tx = vp->dirty_tx = 0;
 		if (vp->drv_flags & IS_BOOMERANG)
-			outb(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); /* Room for a packet. */
+			iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); /* Room for a packet. */
 		/* Clear the Rx, Tx rings. */
 		for (i = 0; i < RX_RING_SIZE; i++)	/* AKPM: this is done in vortex_open, too */
 			vp->rx_ring[i].status = 0;
 		for (i = 0; i < TX_RING_SIZE; i++)
 			vp->tx_skbuff[i] = NULL;
-		outl(0, ioaddr + DownListPtr);
+		iowrite32(0, ioaddr + DownListPtr);
 	}
 	/* Set receiver mode: presumably accept b-case and phys addr only. */
 	set_rx_mode(dev);
 	/* enable 802.1q tagged frames */
 	set_8021q_mode(dev, 1);
-	outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+	iowrite16(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
 
 //	issue_and_wait(dev, SetTxStart|0x07ff);
-	outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
-	outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+	iowrite16(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+	iowrite16(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
 	/* Allow status bits to be seen. */
 	vp->status_enable = SetStatusEnb | HostError|IntReq|StatsFull|TxComplete|
 		(vp->full_bus_master_tx ? DownComplete : TxAvailable) |
@@ -1780,13 +1802,13 @@ vortex_up(struct net_device *dev)
 		(vp->full_bus_master_rx ? 0 : RxComplete) |
 		StatsFull | HostError | TxComplete | IntReq
 		| (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete;
-	outw(vp->status_enable, ioaddr + EL3_CMD);
+	iowrite16(vp->status_enable, ioaddr + EL3_CMD);
 	/* Ack all pending events, and set active indicator mask. */
-	outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+	iowrite16(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
 		 ioaddr + EL3_CMD);
-	outw(vp->intr_enable, ioaddr + EL3_CMD);
+	iowrite16(vp->intr_enable, ioaddr + EL3_CMD);
 	if (vp->cb_fn_base)			/* The PCMCIA people are idiots.  */
-		writel(0x8000, vp->cb_fn_base + 4);
+		iowrite32(0x8000, vp->cb_fn_base + 4);
 	netif_start_queue (dev);
 }
 
@@ -1852,7 +1874,7 @@ vortex_timer(unsigned long data)
 {
 	struct net_device *dev = (struct net_device *)data;
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	int next_tick = 60*HZ;
 	int ok = 0;
 	int media_status, mii_status, old_window;
@@ -1866,9 +1888,9 @@ vortex_timer(unsigned long data)
 	if (vp->medialock)
 		goto leave_media_alone;
 	disable_irq(dev->irq);
-	old_window = inw(ioaddr + EL3_CMD) >> 13;
+	old_window = ioread16(ioaddr + EL3_CMD) >> 13;
 	EL3WINDOW(4);
-	media_status = inw(ioaddr + Wn4_Media);
+	media_status = ioread16(ioaddr + Wn4_Media);
 	switch (dev->if_port) {
 	case XCVR_10baseT:  case XCVR_100baseTx:  case XCVR_100baseFx:
 		if (media_status & Media_LnkBeat) {
@@ -1909,7 +1931,7 @@ vortex_timer(unsigned long data)
 							vp->phys[0], mii_reg5);
 						/* Set the full-duplex bit. */
 						EL3WINDOW(3);
-						outw(	(vp->full_duplex ? 0x20 : 0) |
+						iowrite16(	(vp->full_duplex ? 0x20 : 0) |
 								(vp->large_frames ? 0x40 : 0) |
 								((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? 0x100 : 0),
 								ioaddr + Wn3_MAC_Ctrl);
@@ -1950,15 +1972,15 @@ vortex_timer(unsigned long data)
 					   dev->name, media_tbl[dev->if_port].name);
 			next_tick = media_tbl[dev->if_port].wait;
 		}
-		outw((media_status & ~(Media_10TP|Media_SQE)) |
+		iowrite16((media_status & ~(Media_10TP|Media_SQE)) |
 			 media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media);
 
 		EL3WINDOW(3);
-		config = inl(ioaddr + Wn3_Config);
+		config = ioread32(ioaddr + Wn3_Config);
 		config = BFINS(config, dev->if_port, 20, 4);
-		outl(config, ioaddr + Wn3_Config);
+		iowrite32(config, ioaddr + Wn3_Config);
 
-		outw(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax,
+		iowrite16(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax,
 			 ioaddr + EL3_CMD);
 		if (vortex_debug > 1)
 			printk(KERN_DEBUG "wrote 0x%08x to Wn3_Config\n", config);
@@ -1974,29 +1996,29 @@ leave_media_alone:
 
 	mod_timer(&vp->timer, RUN_AT(next_tick));
 	if (vp->deferred)
-		outw(FakeIntr, ioaddr + EL3_CMD);
+		iowrite16(FakeIntr, ioaddr + EL3_CMD);
 	return;
 }
 
 static void vortex_tx_timeout(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 
 	printk(KERN_ERR "%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
-		   dev->name, inb(ioaddr + TxStatus),
-		   inw(ioaddr + EL3_STATUS));
+		   dev->name, ioread8(ioaddr + TxStatus),
+		   ioread16(ioaddr + EL3_STATUS));
 	EL3WINDOW(4);
 	printk(KERN_ERR "  diagnostics: net %04x media %04x dma %08x fifo %04x\n",
-			inw(ioaddr + Wn4_NetDiag),
-			inw(ioaddr + Wn4_Media),
-			inl(ioaddr + PktStatus),
-			inw(ioaddr + Wn4_FIFODiag));
+			ioread16(ioaddr + Wn4_NetDiag),
+			ioread16(ioaddr + Wn4_Media),
+			ioread32(ioaddr + PktStatus),
+			ioread16(ioaddr + Wn4_FIFODiag));
 	/* Slight code bloat to be user friendly. */
-	if ((inb(ioaddr + TxStatus) & 0x88) == 0x88)
+	if ((ioread8(ioaddr + TxStatus) & 0x88) == 0x88)
 		printk(KERN_ERR "%s: Transmitter encountered 16 collisions --"
 			   " network cable problem?\n", dev->name);
-	if (inw(ioaddr + EL3_STATUS) & IntLatch) {
+	if (ioread16(ioaddr + EL3_STATUS) & IntLatch) {
 		printk(KERN_ERR "%s: Interrupt posted but not delivered --"
 			   " IRQ blocked by another device?\n", dev->name);
 		/* Bad idea here.. but we might as well handle a few events. */
@@ -2022,21 +2044,21 @@ static void vortex_tx_timeout(struct net
 	vp->stats.tx_errors++;
 	if (vp->full_bus_master_tx) {
 		printk(KERN_DEBUG "%s: Resetting the Tx ring pointer.\n", dev->name);
-		if (vp->cur_tx - vp->dirty_tx > 0  &&  inl(ioaddr + DownListPtr) == 0)
-			outl(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc),
+		if (vp->cur_tx - vp->dirty_tx > 0  &&  ioread32(ioaddr + DownListPtr) == 0)
+			iowrite32(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc),
 				 ioaddr + DownListPtr);
 		if (vp->cur_tx - vp->dirty_tx < TX_RING_SIZE)
 			netif_wake_queue (dev);
 		if (vp->drv_flags & IS_BOOMERANG)
-			outb(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold);
-		outw(DownUnstall, ioaddr + EL3_CMD);
+			iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold);
+		iowrite16(DownUnstall, ioaddr + EL3_CMD);
 	} else {
 		vp->stats.tx_dropped++;
 		netif_wake_queue(dev);
 	}
 	
 	/* Issue Tx Enable */
-	outw(TxEnable, ioaddr + EL3_CMD);
+	iowrite16(TxEnable, ioaddr + EL3_CMD);
 	dev->trans_start = jiffies;
 	
 	/* Switch to register set 7 for normal use. */
@@ -2051,7 +2073,7 @@ static void
 vortex_error(struct net_device *dev, int status)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	int do_tx_reset = 0, reset_mask = 0;
 	unsigned char tx_status = 0;
 
@@ -2060,7 +2082,7 @@ vortex_error(struct net_device *dev, int
 	}
 
 	if (status & TxComplete) {			/* Really "TxError" for us. */
-		tx_status = inb(ioaddr + TxStatus);
+		tx_status = ioread8(ioaddr + TxStatus);
 		/* Presumably a tx-timeout. We must merely re-enable. */
 		if (vortex_debug > 2
 			|| (tx_status != 0x88 && vortex_debug > 0)) {
@@ -2074,20 +2096,20 @@ vortex_error(struct net_device *dev, int
 		}
 		if (tx_status & 0x14)  vp->stats.tx_fifo_errors++;
 		if (tx_status & 0x38)  vp->stats.tx_aborted_errors++;
-		outb(0, ioaddr + TxStatus);
+		iowrite8(0, ioaddr + TxStatus);
 		if (tx_status & 0x30) {			/* txJabber or txUnderrun */
 			do_tx_reset = 1;
 		} else if ((tx_status & 0x08) && (vp->drv_flags & MAX_COLLISION_RESET)) {	/* maxCollisions */
 			do_tx_reset = 1;
 			reset_mask = 0x0108;		/* Reset interface logic, but not download logic */
 		} else {						/* Merely re-enable the transmitter. */
-			outw(TxEnable, ioaddr + EL3_CMD);
+			iowrite16(TxEnable, ioaddr + EL3_CMD);
 		}
 	}
 
 	if (status & RxEarly) {				/* Rx early is unused. */
 		vortex_rx(dev);
-		outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
+		iowrite16(AckIntr | RxEarly, ioaddr + EL3_CMD);
 	}
 	if (status & StatsFull) {			/* Empty statistics. */
 		static int DoneDidThat;
@@ -2097,29 +2119,29 @@ vortex_error(struct net_device *dev, int
 		/* HACK: Disable statistics as an interrupt source. */
 		/* This occurs when we have the wrong media type! */
 		if (DoneDidThat == 0  &&
-			inw(ioaddr + EL3_STATUS) & StatsFull) {
+			ioread16(ioaddr + EL3_STATUS) & StatsFull) {
 			printk(KERN_WARNING "%s: Updating statistics failed, disabling "
 				   "stats as an interrupt source.\n", dev->name);
 			EL3WINDOW(5);
-			outw(SetIntrEnb | (inw(ioaddr + 10) & ~StatsFull), ioaddr + EL3_CMD);
+			iowrite16(SetIntrEnb | (ioread16(ioaddr + 10) & ~StatsFull), ioaddr + EL3_CMD);
 			vp->intr_enable &= ~StatsFull;
 			EL3WINDOW(7);
 			DoneDidThat++;
 		}
 	}
 	if (status & IntReq) {		/* Restore all interrupt sources.  */
-		outw(vp->status_enable, ioaddr + EL3_CMD);
-		outw(vp->intr_enable, ioaddr + EL3_CMD);
+		iowrite16(vp->status_enable, ioaddr + EL3_CMD);
+		iowrite16(vp->intr_enable, ioaddr + EL3_CMD);
 	}
 	if (status & HostError) {
 		u16 fifo_diag;
 		EL3WINDOW(4);
-		fifo_diag = inw(ioaddr + Wn4_FIFODiag);
+		fifo_diag = ioread16(ioaddr + Wn4_FIFODiag);
 		printk(KERN_ERR "%s: Host error, FIFO diagnostic register %4.4x.\n",
 			   dev->name, fifo_diag);
 		/* Adapter failure requires Tx/Rx reset and reinit. */
 		if (vp->full_bus_master_tx) {
-			int bus_status = inl(ioaddr + PktStatus);
+			int bus_status = ioread32(ioaddr + PktStatus);
 			/* 0x80000000 PCI master abort. */
 			/* 0x40000000 PCI target abort. */
 			if (vortex_debug)
@@ -2139,14 +2161,14 @@ vortex_error(struct net_device *dev, int
 			set_rx_mode(dev);
 			/* enable 802.1q VLAN tagged frames */
 			set_8021q_mode(dev, 1);
-			outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
-			outw(AckIntr | HostError, ioaddr + EL3_CMD);
+			iowrite16(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
+			iowrite16(AckIntr | HostError, ioaddr + EL3_CMD);
 		}
 	}
 
 	if (do_tx_reset) {
 		issue_and_wait(dev, TxReset|reset_mask);
-		outw(TxEnable, ioaddr + EL3_CMD);
+		iowrite16(TxEnable, ioaddr + EL3_CMD);
 		if (!vp->full_bus_master_tx)
 			netif_wake_queue(dev);
 	}
@@ -2156,29 +2178,29 @@ static int
 vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 
 	/* Put out the doubleword header... */
-	outl(skb->len, ioaddr + TX_FIFO);
+	iowrite32(skb->len, ioaddr + TX_FIFO);
 	if (vp->bus_master) {
 		/* Set the bus-master controller to transfer the packet. */
 		int len = (skb->len + 3) & ~3;
-		outl(	vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len, PCI_DMA_TODEVICE),
+		iowrite32(	vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len, PCI_DMA_TODEVICE),
 				ioaddr + Wn7_MasterAddr);
-		outw(len, ioaddr + Wn7_MasterLen);
+		iowrite16(len, ioaddr + Wn7_MasterLen);
 		vp->tx_skb = skb;
-		outw(StartDMADown, ioaddr + EL3_CMD);
+		iowrite16(StartDMADown, ioaddr + EL3_CMD);
 		/* netif_wake_queue() will be called at the DMADone interrupt. */
 	} else {
 		/* ... and the packet rounded to a doubleword. */
-		outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+		iowrite32_rep(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
 		dev_kfree_skb (skb);
-		if (inw(ioaddr + TxFree) > 1536) {
+		if (ioread16(ioaddr + TxFree) > 1536) {
 			netif_start_queue (dev);	/* AKPM: redundant? */
 		} else {
 			/* Interrupt us when the FIFO has room for max-sized packet. */
 			netif_stop_queue(dev);
-			outw(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
+			iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
 		}
 	}
 
@@ -2189,7 +2211,7 @@ vortex_start_xmit(struct sk_buff *skb, s
 		int tx_status;
 		int i = 32;
 
-		while (--i > 0	&&	(tx_status = inb(ioaddr + TxStatus)) > 0) {
+		while (--i > 0	&&	(tx_status = ioread8(ioaddr + TxStatus)) > 0) {
 			if (tx_status & 0x3C) {		/* A Tx-disabling error occurred.  */
 				if (vortex_debug > 2)
 				  printk(KERN_DEBUG "%s: Tx error, status %2.2x.\n",
@@ -2199,9 +2221,9 @@ vortex_start_xmit(struct sk_buff *skb, s
 				if (tx_status & 0x30) {
 					issue_and_wait(dev, TxReset);
 				}
-				outw(TxEnable, ioaddr + EL3_CMD);
+				iowrite16(TxEnable, ioaddr + EL3_CMD);
 			}
-			outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */
+			iowrite8(0x00, ioaddr + TxStatus); /* Pop the status stack. */
 		}
 	}
 	return 0;
@@ -2211,7 +2233,7 @@ static int
 boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	/* Calculate the next Tx descriptor entry. */
 	int entry = vp->cur_tx % TX_RING_SIZE;
 	struct boom_tx_desc *prev_entry = &vp->tx_ring[(vp->cur_tx-1) % TX_RING_SIZE];
@@ -2275,8 +2297,8 @@ boomerang_start_xmit(struct sk_buff *skb
 	/* Wait for the stall to complete. */
 	issue_and_wait(dev, DownStall);
 	prev_entry->next = cpu_to_le32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc));
-	if (inl(ioaddr + DownListPtr) == 0) {
-		outl(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc), ioaddr + DownListPtr);
+	if (ioread32(ioaddr + DownListPtr) == 0) {
+		iowrite32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc), ioaddr + DownListPtr);
 		vp->queued_packet++;
 	}
 
@@ -2291,7 +2313,7 @@ boomerang_start_xmit(struct sk_buff *skb
 		prev_entry->status &= cpu_to_le32(~TxIntrUploaded);
 #endif
 	}
-	outw(DownUnstall, ioaddr + EL3_CMD);
+	iowrite16(DownUnstall, ioaddr + EL3_CMD);
 	spin_unlock_irqrestore(&vp->lock, flags);
 	dev->trans_start = jiffies;
 	return 0;
@@ -2310,15 +2332,15 @@ vortex_interrupt(int irq, void *dev_id, 
 {
 	struct net_device *dev = dev_id;
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr;
+	void __iomem *ioaddr;
 	int status;
 	int work_done = max_interrupt_work;
 	int handled = 0;
 
-	ioaddr = dev->base_addr;
+	ioaddr = vp->ioaddr;
 	spin_lock(&vp->lock);
 
-	status = inw(ioaddr + EL3_STATUS);
+	status = ioread16(ioaddr + EL3_STATUS);
 
 	if (vortex_debug > 6)
 		printk("vortex_interrupt(). status=0x%4x\n", status);
@@ -2337,7 +2359,7 @@ vortex_interrupt(int irq, void *dev_id, 
 
 	if (vortex_debug > 4)
 		printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n",
-			   dev->name, status, inb(ioaddr + Timer));
+			   dev->name, status, ioread8(ioaddr + Timer));
 
 	do {
 		if (vortex_debug > 5)
@@ -2350,16 +2372,16 @@ vortex_interrupt(int irq, void *dev_id, 
 			if (vortex_debug > 5)
 				printk(KERN_DEBUG "	TX room bit was handled.\n");
 			/* There's room in the FIFO for a full-sized packet. */
-			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+			iowrite16(AckIntr | TxAvailable, ioaddr + EL3_CMD);
 			netif_wake_queue (dev);
 		}
 
 		if (status & DMADone) {
-			if (inw(ioaddr + Wn7_MasterStatus) & 0x1000) {
-				outw(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */
+			if (ioread16(ioaddr + Wn7_MasterStatus) & 0x1000) {
+				iowrite16(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */
 				pci_unmap_single(VORTEX_PCI(vp), vp->tx_skb_dma, (vp->tx_skb->len + 3) & ~3, PCI_DMA_TODEVICE);
 				dev_kfree_skb_irq(vp->tx_skb); /* Release the transferred buffer */
-				if (inw(ioaddr + TxFree) > 1536) {
+				if (ioread16(ioaddr + TxFree) > 1536) {
 					/*
 					 * AKPM: FIXME: I don't think we need this.  If the queue was stopped due to
 					 * insufficient FIFO room, the TxAvailable test will succeed and call
@@ -2367,7 +2389,7 @@ vortex_interrupt(int irq, void *dev_id, 
 					 */
 					netif_wake_queue(dev);
 				} else { /* Interrupt when FIFO has room for max-sized packet. */
-					outw(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
+					iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
 					netif_stop_queue(dev);
 				}
 			}
@@ -2385,17 +2407,17 @@ vortex_interrupt(int irq, void *dev_id, 
 			/* Disable all pending interrupts. */
 			do {
 				vp->deferred |= status;
-				outw(SetStatusEnb | (~vp->deferred & vp->status_enable),
+				iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable),
 					 ioaddr + EL3_CMD);
-				outw(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD);
-			} while ((status = inw(ioaddr + EL3_CMD)) & IntLatch);
+				iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD);
+			} while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch);
 			/* The timer will reenable interrupts. */
 			mod_timer(&vp->timer, jiffies + 1*HZ);
 			break;
 		}
 		/* Acknowledge the IRQ. */
-		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
-	} while ((status = inw(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
+		iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+	} while ((status = ioread16(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
 
 	if (vortex_debug > 4)
 		printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n",
@@ -2415,11 +2437,11 @@ boomerang_interrupt(int irq, void *dev_i
 {
 	struct net_device *dev = dev_id;
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr;
+	void __iomem *ioaddr;
 	int status;
 	int work_done = max_interrupt_work;
 
-	ioaddr = dev->base_addr;
+	ioaddr = vp->ioaddr;
 
 	/*
 	 * It seems dopey to put the spinlock this early, but we could race against vortex_tx_timeout
@@ -2427,7 +2449,7 @@ boomerang_interrupt(int irq, void *dev_i
 	 */
 	spin_lock(&vp->lock);
 
-	status = inw(ioaddr + EL3_STATUS);
+	status = ioread16(ioaddr + EL3_STATUS);
 
 	if (vortex_debug > 6)
 		printk(KERN_DEBUG "boomerang_interrupt. status=0x%4x\n", status);
@@ -2448,13 +2470,13 @@ boomerang_interrupt(int irq, void *dev_i
 
 	if (vortex_debug > 4)
 		printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n",
-			   dev->name, status, inb(ioaddr + Timer));
+			   dev->name, status, ioread8(ioaddr + Timer));
 	do {
 		if (vortex_debug > 5)
 				printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n",
 					   dev->name, status);
 		if (status & UpComplete) {
-			outw(AckIntr | UpComplete, ioaddr + EL3_CMD);
+			iowrite16(AckIntr | UpComplete, ioaddr + EL3_CMD);
 			if (vortex_debug > 5)
 				printk(KERN_DEBUG "boomerang_interrupt->boomerang_rx\n");
 			boomerang_rx(dev);
@@ -2463,11 +2485,11 @@ boomerang_interrupt(int irq, void *dev_i
 		if (status & DownComplete) {
 			unsigned int dirty_tx = vp->dirty_tx;
 
-			outw(AckIntr | DownComplete, ioaddr + EL3_CMD);
+			iowrite16(AckIntr | DownComplete, ioaddr + EL3_CMD);
 			while (vp->cur_tx - dirty_tx > 0) {
 				int entry = dirty_tx % TX_RING_SIZE;
 #if 1	/* AKPM: the latter is faster, but cyclone-only */
-				if (inl(ioaddr + DownListPtr) ==
+				if (ioread32(ioaddr + DownListPtr) ==
 					vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc))
 					break;			/* It still hasn't been processed. */
 #else
@@ -2514,20 +2536,20 @@ boomerang_interrupt(int irq, void *dev_i
 			/* Disable all pending interrupts. */
 			do {
 				vp->deferred |= status;
-				outw(SetStatusEnb | (~vp->deferred & vp->status_enable),
+				iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable),
 					 ioaddr + EL3_CMD);
-				outw(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD);
-			} while ((status = inw(ioaddr + EL3_CMD)) & IntLatch);
+				iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD);
+			} while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch);
 			/* The timer will reenable interrupts. */
 			mod_timer(&vp->timer, jiffies + 1*HZ);
 			break;
 		}
 		/* Acknowledge the IRQ. */
-		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+		iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
 		if (vp->cb_fn_base)			/* The PCMCIA people are idiots.  */
-			writel(0x8000, vp->cb_fn_base + 4);
+			iowrite32(0x8000, vp->cb_fn_base + 4);
 
-	} while ((status = inw(ioaddr + EL3_STATUS)) & IntLatch);
+	} while ((status = ioread16(ioaddr + EL3_STATUS)) & IntLatch);
 
 	if (vortex_debug > 4)
 		printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n",
@@ -2540,16 +2562,16 @@ handler_exit:
 static int vortex_rx(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	int i;
 	short rx_status;
 
 	if (vortex_debug > 5)
 		printk(KERN_DEBUG "vortex_rx(): status %4.4x, rx_status %4.4x.\n",
-			   inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
-	while ((rx_status = inw(ioaddr + RxStatus)) > 0) {
+			   ioread16(ioaddr+EL3_STATUS), ioread16(ioaddr+RxStatus));
+	while ((rx_status = ioread16(ioaddr + RxStatus)) > 0) {
 		if (rx_status & 0x4000) { /* Error, update stats. */
-			unsigned char rx_error = inb(ioaddr + RxErrors);
+			unsigned char rx_error = ioread8(ioaddr + RxErrors);
 			if (vortex_debug > 2)
 				printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error);
 			vp->stats.rx_errors++;
@@ -2572,27 +2594,28 @@ static int vortex_rx(struct net_device *
 				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
 				/* 'skb_put()' points to the start of sk_buff data area. */
 				if (vp->bus_master &&
-					! (inw(ioaddr + Wn7_MasterStatus) & 0x8000)) {
+					! (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000)) {
 					dma_addr_t dma = pci_map_single(VORTEX_PCI(vp), skb_put(skb, pkt_len),
 									   pkt_len, PCI_DMA_FROMDEVICE);
-					outl(dma, ioaddr + Wn7_MasterAddr);
-					outw((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen);
-					outw(StartDMAUp, ioaddr + EL3_CMD);
-					while (inw(ioaddr + Wn7_MasterStatus) & 0x8000)
+					iowrite32(dma, ioaddr + Wn7_MasterAddr);
+					iowrite16((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen);
+					iowrite16(StartDMAUp, ioaddr + EL3_CMD);
+					while (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000)
 						;
 					pci_unmap_single(VORTEX_PCI(vp), dma, pkt_len, PCI_DMA_FROMDEVICE);
 				} else {
-					insl(ioaddr + RX_FIFO, skb_put(skb, pkt_len),
-						 (pkt_len + 3) >> 2);
+					ioread32_rep(ioaddr + RX_FIFO,
+					             skb_put(skb, pkt_len),
+						     (pkt_len + 3) >> 2);
 				}
-				outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
+				iowrite16(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
 				skb->protocol = eth_type_trans(skb, dev);
 				netif_rx(skb);
 				dev->last_rx = jiffies;
 				vp->stats.rx_packets++;
 				/* Wait a limited time to go to next packet. */
 				for (i = 200; i >= 0; i--)
-					if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
+					if ( ! (ioread16(ioaddr + EL3_STATUS) & CmdInProgress))
 						break;
 				continue;
 			} else if (vortex_debug > 0)
@@ -2611,12 +2634,12 @@ boomerang_rx(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
 	int entry = vp->cur_rx % RX_RING_SIZE;
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	int rx_status;
 	int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx;
 
 	if (vortex_debug > 5)
-		printk(KERN_DEBUG "boomerang_rx(): status %4.4x\n", inw(ioaddr+EL3_STATUS));
+		printk(KERN_DEBUG "boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS));
 
 	while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){
 		if (--rx_work_limit < 0)
@@ -2699,7 +2722,7 @@ boomerang_rx(struct net_device *dev)
 			vp->rx_skbuff[entry] = skb;
 		}
 		vp->rx_ring[entry].status = 0;	/* Clear complete bit. */
-		outw(UpUnstall, ioaddr + EL3_CMD);
+		iowrite16(UpUnstall, ioaddr + EL3_CMD);
 	}
 	return 0;
 }
@@ -2728,7 +2751,7 @@ static void
 vortex_down(struct net_device *dev, int final_down)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 
 	netif_stop_queue (dev);
 
@@ -2736,26 +2759,26 @@ vortex_down(struct net_device *dev, int 
 	del_timer_sync(&vp->timer);
 
 	/* Turn off statistics ASAP.  We update vp->stats below. */
-	outw(StatsDisable, ioaddr + EL3_CMD);
+	iowrite16(StatsDisable, ioaddr + EL3_CMD);
 
 	/* Disable the receiver and transmitter. */
-	outw(RxDisable, ioaddr + EL3_CMD);
-	outw(TxDisable, ioaddr + EL3_CMD);
+	iowrite16(RxDisable, ioaddr + EL3_CMD);
+	iowrite16(TxDisable, ioaddr + EL3_CMD);
 
 	/* Disable receiving 802.1q tagged frames */
 	set_8021q_mode(dev, 0);
 
 	if (dev->if_port == XCVR_10base2)
 		/* Turn off thinnet power.  Green! */
-		outw(StopCoax, ioaddr + EL3_CMD);
+		iowrite16(StopCoax, ioaddr + EL3_CMD);
 
-	outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
+	iowrite16(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
 
 	update_stats(ioaddr, dev);
 	if (vp->full_bus_master_rx)
-		outl(0, ioaddr + UpListPtr);
+		iowrite32(0, ioaddr + UpListPtr);
 	if (vp->full_bus_master_tx)
-		outl(0, ioaddr + DownListPtr);
+		iowrite32(0, ioaddr + DownListPtr);
 
 	if (final_down && VORTEX_PCI(vp)) {
 		vp->pm_state_valid = 1;
@@ -2768,7 +2791,7 @@ static int
 vortex_close(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	int i;
 
 	if (netif_device_present(dev))
@@ -2776,7 +2799,7 @@ vortex_close(struct net_device *dev)
 
 	if (vortex_debug > 1) {
 		printk(KERN_DEBUG"%s: vortex_close() status %4.4x, Tx status %2.2x.\n",
-			   dev->name, inw(ioaddr + EL3_STATUS), inb(ioaddr + TxStatus));
+			   dev->name, ioread16(ioaddr + EL3_STATUS), ioread8(ioaddr + TxStatus));
 		printk(KERN_DEBUG "%s: vortex close stats: rx_nocopy %d rx_copy %d"
 			   " tx_queued %d Rx pre-checksummed %d.\n",
 			   dev->name, vp->rx_nocopy, vp->rx_copy, vp->queued_packet, vp->rx_csumhits);
@@ -2830,18 +2853,18 @@ dump_tx_ring(struct net_device *dev)
 {
 	if (vortex_debug > 0) {
 	struct vortex_private *vp = netdev_priv(dev);
-		long ioaddr = dev->base_addr;
+		void __iomem *ioaddr = vp->ioaddr;
 		
 		if (vp->full_bus_master_tx) {
 			int i;
-			int stalled = inl(ioaddr + PktStatus) & 0x04;	/* Possible racy. But it's only debug stuff */
+			int stalled = ioread32(ioaddr + PktStatus) & 0x04;	/* Possible racy. But it's only debug stuff */
 
 			printk(KERN_ERR "  Flags; bus-master %d, dirty %d(%d) current %d(%d)\n",
 					vp->full_bus_master_tx,
 					vp->dirty_tx, vp->dirty_tx % TX_RING_SIZE,
 					vp->cur_tx, vp->cur_tx % TX_RING_SIZE);
 			printk(KERN_ERR "  Transmit list %8.8x vs. %p.\n",
-				   inl(ioaddr + DownListPtr),
+				   ioread32(ioaddr + DownListPtr),
 				   &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
 			issue_and_wait(dev, DownStall);
 			for (i = 0; i < TX_RING_SIZE; i++) {
@@ -2855,7 +2878,7 @@ dump_tx_ring(struct net_device *dev)
 					   le32_to_cpu(vp->tx_ring[i].status));
 			}
 			if (!stalled)
-				outw(DownUnstall, ioaddr + EL3_CMD);
+				iowrite16(DownUnstall, ioaddr + EL3_CMD);
 		}
 	}
 }
@@ -2863,11 +2886,12 @@ dump_tx_ring(struct net_device *dev)
 static struct net_device_stats *vortex_get_stats(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned long flags;
 
 	if (netif_device_present(dev)) {	/* AKPM: Used to be netif_running */
 		spin_lock_irqsave (&vp->lock, flags);
-		update_stats(dev->base_addr, dev);
+		update_stats(ioaddr, dev);
 		spin_unlock_irqrestore (&vp->lock, flags);
 	}
 	return &vp->stats;
@@ -2880,37 +2904,37 @@ static struct net_device_stats *vortex_g
 	table.  This is done by checking that the ASM (!) code generated uses
 	atomic updates with '+='.
 	*/
-static void update_stats(long ioaddr, struct net_device *dev)
+static void update_stats(void __iomem *ioaddr, struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	int old_window = inw(ioaddr + EL3_CMD);
+	int old_window = ioread16(ioaddr + EL3_CMD);
 
 	if (old_window == 0xffff)	/* Chip suspended or ejected. */
 		return;
 	/* Unlike the 3c5x9 we need not turn off stats updates while reading. */
 	/* Switch to the stats window, and read everything. */
 	EL3WINDOW(6);
-	vp->stats.tx_carrier_errors		+= inb(ioaddr + 0);
-	vp->stats.tx_heartbeat_errors		+= inb(ioaddr + 1);
-	vp->stats.collisions			+= inb(ioaddr + 3);
-	vp->stats.tx_window_errors		+= inb(ioaddr + 4);
-	vp->stats.rx_fifo_errors		+= inb(ioaddr + 5);
-	vp->stats.tx_packets			+= inb(ioaddr + 6);
-	vp->stats.tx_packets			+= (inb(ioaddr + 9)&0x30) << 4;
-	/* Rx packets	*/			inb(ioaddr + 7);   /* Must read to clear */
+	vp->stats.tx_carrier_errors		+= ioread8(ioaddr + 0);
+	vp->stats.tx_heartbeat_errors		+= ioread8(ioaddr + 1);
+	vp->stats.collisions			+= ioread8(ioaddr + 3);
+	vp->stats.tx_window_errors		+= ioread8(ioaddr + 4);
+	vp->stats.rx_fifo_errors		+= ioread8(ioaddr + 5);
+	vp->stats.tx_packets			+= ioread8(ioaddr + 6);
+	vp->stats.tx_packets			+= (ioread8(ioaddr + 9)&0x30) << 4;
+	/* Rx packets	*/			ioread8(ioaddr + 7);   /* Must read to clear */
 	/* Don't bother with register 9, an extension of registers 6&7.
 	   If we do use the 6&7 values the atomic update assumption above
 	   is invalid. */
-	vp->stats.rx_bytes 			+= inw(ioaddr + 10);
-	vp->stats.tx_bytes 			+= inw(ioaddr + 12);
+	vp->stats.rx_bytes 			+= ioread16(ioaddr + 10);
+	vp->stats.tx_bytes 			+= ioread16(ioaddr + 12);
 	/* Extra stats for get_ethtool_stats() */
-	vp->xstats.tx_multiple_collisions	+= inb(ioaddr + 2);
-	vp->xstats.tx_deferred			+= inb(ioaddr + 8);
+	vp->xstats.tx_multiple_collisions	+= ioread8(ioaddr + 2);
+	vp->xstats.tx_deferred			+= ioread8(ioaddr + 8);
 	EL3WINDOW(4);
-	vp->xstats.rx_bad_ssd			+= inb(ioaddr + 12);
+	vp->xstats.rx_bad_ssd			+= ioread8(ioaddr + 12);
 
 	{
-		u8 up = inb(ioaddr + 13);
+		u8 up = ioread8(ioaddr + 13);
 		vp->stats.rx_bytes += (up & 0x0f) << 16;
 		vp->stats.tx_bytes += (up & 0xf0) << 12;
 	}
@@ -2922,7 +2946,7 @@ static void update_stats(long ioaddr, st
 static int vortex_nway_reset(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned long flags;
 	int rc;
 
@@ -2936,7 +2960,7 @@ static int vortex_nway_reset(struct net_
 static u32 vortex_get_link(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned long flags;
 	int rc;
 
@@ -2950,7 +2974,7 @@ static u32 vortex_get_link(struct net_de
 static int vortex_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned long flags;
 	int rc;
 
@@ -2964,7 +2988,7 @@ static int vortex_get_settings(struct ne
 static int vortex_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned long flags;
 	int rc;
 
@@ -2994,10 +3018,11 @@ static void vortex_get_ethtool_stats(str
 	struct ethtool_stats *stats, u64 *data)
 {
 	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned long flags;
 
 	spin_lock_irqsave(&vp->lock, flags);
-	update_stats(dev->base_addr, dev);
+	update_stats(ioaddr, dev);
 	spin_unlock_irqrestore(&vp->lock, flags);
 
 	data[0] = vp->xstats.tx_deferred;
@@ -3057,7 +3082,7 @@ static int vortex_ioctl(struct net_devic
 {
 	int err;
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned long flags;
 	int state = 0;
 
@@ -3085,7 +3110,8 @@ static int vortex_ioctl(struct net_devic
    the chip has a very clean way to set the mode, unlike many others. */
 static void set_rx_mode(struct net_device *dev)
 {
-	long ioaddr = dev->base_addr;
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
 	int new_mode;
 
 	if (dev->flags & IFF_PROMISC) {
@@ -3097,7 +3123,7 @@ static void set_rx_mode(struct net_devic
 	} else
 		new_mode = SetRxFilter | RxStation | RxBroadcast;
 
-	outw(new_mode, ioaddr + EL3_CMD);
+	iowrite16(new_mode, ioaddr + EL3_CMD);
 }
 
 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
@@ -3111,8 +3137,8 @@ static void set_rx_mode(struct net_devic
 static void set_8021q_mode(struct net_device *dev, int enable)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
-	int old_window = inw(ioaddr + EL3_CMD);
+	void __iomem *ioaddr = vp->ioaddr;
+	int old_window = ioread16(ioaddr + EL3_CMD);
 	int mac_ctrl;
 
 	if ((vp->drv_flags&IS_CYCLONE) || (vp->drv_flags&IS_TORNADO)) {
@@ -3124,24 +3150,24 @@ static void set_8021q_mode(struct net_de
 			max_pkt_size += 4;	/* 802.1Q VLAN tag */
 
 		EL3WINDOW(3);
-		outw(max_pkt_size, ioaddr+Wn3_MaxPktSize);
+		iowrite16(max_pkt_size, ioaddr+Wn3_MaxPktSize);
 
 		/* set VlanEtherType to let the hardware checksumming
 		   treat tagged frames correctly */
 		EL3WINDOW(7);
-		outw(VLAN_ETHER_TYPE, ioaddr+Wn7_VlanEtherType);
+		iowrite16(VLAN_ETHER_TYPE, ioaddr+Wn7_VlanEtherType);
 	} else {
 		/* on older cards we have to enable large frames */
 
 		vp->large_frames = dev->mtu > 1500 || enable;
 
 		EL3WINDOW(3);
-		mac_ctrl = inw(ioaddr+Wn3_MAC_Ctrl);
+		mac_ctrl = ioread16(ioaddr+Wn3_MAC_Ctrl);
 		if (vp->large_frames)
 			mac_ctrl |= 0x40;
 		else
 			mac_ctrl &= ~0x40;
-		outw(mac_ctrl, ioaddr+Wn3_MAC_Ctrl);
+		iowrite16(mac_ctrl, ioaddr+Wn3_MAC_Ctrl);
 	}
 
 	EL3WINDOW(old_window);
@@ -3163,7 +3189,7 @@ static void set_8021q_mode(struct net_de
 /* The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
    met by back-to-back PCI I/O cycles, but we insert a delay to avoid
    "overclocking" issues. */
-#define mdio_delay() inl(mdio_addr)
+#define mdio_delay() ioread32(mdio_addr)
 
 #define MDIO_SHIFT_CLK	0x01
 #define MDIO_DIR_WRITE	0x04
@@ -3174,15 +3200,15 @@ static void set_8021q_mode(struct net_de
 
 /* Generate the preamble required for initial synchronization and
    a few older transceivers. */
-static void mdio_sync(long ioaddr, int bits)
+static void mdio_sync(void __iomem *ioaddr, int bits)
 {
-	long mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+	void __iomem *mdio_addr = ioaddr + Wn4_PhysicalMgmt;
 
 	/* Establish sync by sending at least 32 logic ones. */
 	while (-- bits >= 0) {
-		outw(MDIO_DATA_WRITE1, mdio_addr);
+		iowrite16(MDIO_DATA_WRITE1, mdio_addr);
 		mdio_delay();
-		outw(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
+		iowrite16(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
 		mdio_delay();
 	}
 }
@@ -3190,10 +3216,11 @@ static void mdio_sync(long ioaddr, int b
 static int mdio_read(struct net_device *dev, int phy_id, int location)
 {
 	int i;
-	long ioaddr = dev->base_addr;
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
 	int read_cmd = (0xf6 << 10) | (phy_id << 5) | location;
 	unsigned int retval = 0;
-	long mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+	void __iomem *mdio_addr = ioaddr + Wn4_PhysicalMgmt;
 
 	if (mii_preamble_required)
 		mdio_sync(ioaddr, 32);
@@ -3201,17 +3228,17 @@ static int mdio_read(struct net_device *
 	/* Shift the read command bits out. */
 	for (i = 14; i >= 0; i--) {
 		int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
-		outw(dataval, mdio_addr);
+		iowrite16(dataval, mdio_addr);
 		mdio_delay();
-		outw(dataval | MDIO_SHIFT_CLK, mdio_addr);
+		iowrite16(dataval | MDIO_SHIFT_CLK, mdio_addr);
 		mdio_delay();
 	}
 	/* Read the two transition, 16 data, and wire-idle bits. */
 	for (i = 19; i > 0; i--) {
-		outw(MDIO_ENB_IN, mdio_addr);
+		iowrite16(MDIO_ENB_IN, mdio_addr);
 		mdio_delay();
-		retval = (retval << 1) | ((inw(mdio_addr) & MDIO_DATA_READ) ? 1 : 0);
-		outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
+		retval = (retval << 1) | ((ioread16(mdio_addr) & MDIO_DATA_READ) ? 1 : 0);
+		iowrite16(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
 		mdio_delay();
 	}
 	return retval & 0x20000 ? 0xffff : retval>>1 & 0xffff;
@@ -3219,9 +3246,10 @@ static int mdio_read(struct net_device *
 
 static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
 {
-	long ioaddr = dev->base_addr;
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
 	int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value;
-	long mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+	void __iomem *mdio_addr = ioaddr + Wn4_PhysicalMgmt;
 	int i;
 
 	if (mii_preamble_required)
@@ -3230,16 +3258,16 @@ static void mdio_write(struct net_device
 	/* Shift the command bits out. */
 	for (i = 31; i >= 0; i--) {
 		int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
-		outw(dataval, mdio_addr);
+		iowrite16(dataval, mdio_addr);
 		mdio_delay();
-		outw(dataval | MDIO_SHIFT_CLK, mdio_addr);
+		iowrite16(dataval | MDIO_SHIFT_CLK, mdio_addr);
 		mdio_delay();
 	}
 	/* Leave the interface idle. */
 	for (i = 1; i >= 0; i--) {
-		outw(MDIO_ENB_IN, mdio_addr);
+		iowrite16(MDIO_ENB_IN, mdio_addr);
 		mdio_delay();
-		outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
+		iowrite16(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
 		mdio_delay();
 	}
 	return;
@@ -3250,15 +3278,15 @@ static void mdio_write(struct net_device
 static void acpi_set_WOL(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 
 	if (vp->enable_wol) {
 		/* Power up on: 1==Downloaded Filter, 2==Magic Packets, 4==Link Status. */
 		EL3WINDOW(7);
-		outw(2, ioaddr + 0x0c);
+		iowrite16(2, ioaddr + 0x0c);
 		/* The RxFilter must accept the WOL frames. */
-		outw(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD);
-		outw(RxEnable, ioaddr + EL3_CMD);
+		iowrite16(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD);
+		iowrite16(RxEnable, ioaddr + EL3_CMD);
 
 		pci_enable_wake(VORTEX_PCI(vp), 0, 1);
 
@@ -3280,10 +3308,9 @@ static void __devexit vortex_remove_one 
 
 	vp = netdev_priv(dev);
 
-	/* AKPM: FIXME: we should have
-	 *	if (vp->cb_fn_base) iounmap(vp->cb_fn_base);
-	 * here
-	 */
+	if (vp->cb_fn_base)
+		pci_iounmap(VORTEX_PCI(vp), vp->cb_fn_base);
+
 	unregister_netdev(dev);
 
 	if (VORTEX_PCI(vp)) {
@@ -3293,8 +3320,10 @@ static void __devexit vortex_remove_one 
 		pci_disable_device(VORTEX_PCI(vp));
 	}
 	/* Should really use issue_and_wait() here */
-	outw(TotalReset | ((vp->drv_flags & EEPROM_RESET) ? 0x04 : 0x14),
-	     dev->base_addr + EL3_CMD);
+	iowrite16(TotalReset | ((vp->drv_flags & EEPROM_RESET) ? 0x04 : 0x14),
+	     vp->ioaddr + EL3_CMD);
+
+	pci_iounmap(VORTEX_PCI(vp), vp->ioaddr);
 
 	pci_free_consistent(pdev,
 						sizeof(struct boom_rx_desc) * RX_RING_SIZE
@@ -3342,7 +3371,7 @@ static int __init vortex_init (void)
 static void __exit vortex_eisa_cleanup (void)
 {
 	struct vortex_private *vp;
-	long ioaddr;
+	void __iomem *ioaddr;
 
 #ifdef CONFIG_EISA
 	/* Take care of the EISA devices */
@@ -3351,11 +3380,13 @@ static void __exit vortex_eisa_cleanup (
 	
 	if (compaq_net_device) {
 		vp = compaq_net_device->priv;
-		ioaddr = compaq_net_device->base_addr;
+		ioaddr = ioport_map(compaq_net_device->base_addr,
+		                    VORTEX_TOTAL_SIZE);
 
 		unregister_netdev (compaq_net_device);
-		outw (TotalReset, ioaddr + EL3_CMD);
-		release_region (ioaddr, VORTEX_TOTAL_SIZE);
+		iowrite16 (TotalReset, ioaddr + EL3_CMD);
+		release_region(compaq_net_device->base_addr,
+		               VORTEX_TOTAL_SIZE);
 
 		free_netdev (compaq_net_device);
 	}

jwltest-acpi-dsdt-initrd.patch:
 drivers/acpi/Kconfig        |   13 +++++
 drivers/acpi/osl.c          |  104 +++++++++++++++++++++++++++++++++++++++-----
 drivers/acpi/tables/tbget.c |    5 ++
 init/main.c                 |   16 +++---
 4 files changed, 120 insertions(+), 18 deletions(-)

--- NEW FILE jwltest-acpi-dsdt-initrd.patch ---
--- linux-2.6.14/drivers/acpi/Kconfig.orig	2005-11-07 15:45:19.000000000 -0500
+++ linux-2.6.14/drivers/acpi/Kconfig	2005-11-07 15:45:27.000000000 -0500
@@ -341,4 +341,17 @@ config ACPI_HOTPLUG_MEMORY
 		$>modprobe acpi_memhotplug 
 endif	# ACPI
 
+config ACPI_INITRD
+	bool "Read DSDT from initrd or initramfs"
+	depends on ACPI && BLK_DEV_INITRD && !ACPI_CUSTOM_DSDT
+	default n
+	help
+	  The DSDT (Differentiated System Description Table) often needs to be
+	  overridden because of broken BIOS implementations. If you want to use
+	  a customized DSDT, please use the mkinitrd tool (mkinitrd package) to 
+	  attach the DSDT to the initrd or initramfs 
+	  (see http://gaugusch.at/kernel.shtml for details)
+	  If there is no DSDT found in the initrd, the DSDT from the BIOS is
+	  used. It is save to say yes here.
+
 endmenu
--- linux-2.6.14/drivers/acpi/osl.c.orig	2005-11-07 15:45:19.000000000 -0500
+++ linux-2.6.14/drivers/acpi/osl.c	2005-11-07 15:45:27.000000000 -0500
@@ -44,6 +44,10 @@
 #include <asm/uaccess.h>
 
 #include <linux/efi.h>
+#ifdef CONFIG_ACPI_INITRD
+#include<linux/syscalls.h>
+#include <linux/initrd.h>
+#endif
 
 #define _COMPONENT		ACPI_OS_SERVICES
 ACPI_MODULE_NAME("osl")
@@ -244,24 +248,104 @@ acpi_os_predefined_override(const struct
 	return AE_OK;
 }
 
+#ifdef CONFIG_ACPI_INITRD
+static char *
+acpi_find_dsdt_initrd(void)
+{
+	static const char signature[] = "INITRDDSDT123DSDT123";
+	char *dsdt_start = NULL;
+	char *dsdt_buffer = NULL;
+	unsigned long len = 0, len2 = 0;
+	int fd;
+	char ramfs_dsdt_name[10] = "/DSDT.aml";
+	struct kstat stat;
+
+	/* try to get dsdt from tail of initrd */
+	if ((fd = sys_open(ramfs_dsdt_name, O_RDONLY, 0)) < 0) {
+		if (initrd_start) {
+			char *data = (char *)initrd_start;
+
+			printk(KERN_INFO PREFIX "Looking for DSDT in initrd...");
+
+			/* Search for the start signature */
+			while (data < (char *)initrd_end - sizeof(signature) - 4) {
+				if (!memcmp(data, signature, sizeof(signature))) {
+					data += sizeof(signature);
+					if (!memcmp(data, "DSDT", 4))
+						dsdt_start = data;
+					break;
+				}
+				data++;
+			}
+
+			if (dsdt_start){
+				printk(PREFIX " found at offset %zu",
+				       dsdt_start - (char *)initrd_start);
+				len = (char*) initrd_end - dsdt_start;
+				printk(", size: %zu bytes\n", len);
+				dsdt_buffer = ACPI_MEM_ALLOCATE(len + 1);
+				memcpy(dsdt_buffer, dsdt_start, len);
+				*(dsdt_buffer + len + 1)= '\0';
+			}					
+			else
+				printk(" not found!\n");
+		}
+	}
+	/* get dsdt from initramfs */
+	else{
+		printk(KERN_INFO PREFIX "Looking for DSDT in initramfs...");
+		if (vfs_stat(ramfs_dsdt_name, &stat) < 0){
+			printk ("error getting stats for file %s\n", ramfs_dsdt_name);
+			return NULL;
+		}
+		
+		len = stat.size;
+		dsdt_buffer = ACPI_MEM_ALLOCATE(len + 1);
+		if (!dsdt_buffer) {
+			printk("Could not allocate %lu bytes of memory\n", len);
+			return NULL;
+		}
+		printk (" found %s ...", ramfs_dsdt_name);
+		
+		len2 = sys_read (fd, (char __user *) dsdt_buffer, len);
+		if (len2 < len ){
+			printk(PREFIX "\nError trying to read %lu bytes from %s\n", 
+			       len, ramfs_dsdt_name);
+			ACPI_MEM_FREE (dsdt_buffer);
+			dsdt_buffer = NULL;
+		}
+		else{
+			printk(" successfully read %lu bytes from %s\n", 
+			       len, ramfs_dsdt_name);
+			*(dsdt_buffer + len + 1) = '\0';
+		}
+	}
+	if (!dsdt_buffer)
+	    printk(" not found!\n");
+	return dsdt_buffer;
+}
+#endif
+	
 acpi_status
-acpi_os_table_override(struct acpi_table_header * existing_table,
-		       struct acpi_table_header ** new_table)
+acpi_os_table_override (struct acpi_table_header *existing_table,
+			struct acpi_table_header **new_table)
 {
 	if (!existing_table || !new_table)
 		return AE_BAD_PARAMETER;
-
-#ifdef CONFIG_ACPI_CUSTOM_DSDT
-	if (strncmp(existing_table->signature, "DSDT", 4) == 0)
-		*new_table = (struct acpi_table_header *)AmlCode;
-	else
-		*new_table = NULL;
-#else
+		
 	*new_table = NULL;
+	if (strncmp(existing_table->signature, "DSDT", 4) == 0) {
+#ifdef CONFIG_ACPI_CUSTOM_DSDT
+		*new_table = (struct acpi_table_header*)AmlCode;
+#elif defined(CONFIG_ACPI_INITRD)
+		*new_table = (struct acpi_table_header*)acpi_find_dsdt_initrd();
 #endif
+		if (*new_table)
+			printk(KERN_INFO PREFIX "Using customized DSDT\n");
+	}
 	return AE_OK;
 }
-
+ 
 static irqreturn_t acpi_irq(int irq, void *dev_id, struct pt_regs *regs)
 {
 	return (*acpi_irq_handler) (acpi_irq_context) ? IRQ_HANDLED : IRQ_NONE;
--- linux-2.6.14/drivers/acpi/tables/tbget.c.orig	2005-11-07 15:46:15.000000000 -0500
+++ linux-2.6.14/drivers/acpi/tables/tbget.c	2005-11-07 15:46:08.000000000 -0500
@@ -283,6 +283,11 @@ acpi_tb_table_override(struct acpi_table
 	ACPI_REPORT_INFO(("Table [%4.4s] replaced by host OS\n",
 			  table_info->pointer->signature));
 
+#ifdef CONFIG_ACPI_INITRD
+	if (new_table)
+	    ACPI_MEM_FREE(new_table);
+#endif
+
 	return_ACPI_STATUS(AE_OK);
 }
 
--- linux-2.6.14/init/main.c.orig	2005-11-07 15:45:19.000000000 -0500
+++ linux-2.6.14/init/main.c	2005-11-07 15:45:27.000000000 -0500
@@ -540,8 +540,6 @@ asmlinkage void __init start_kernel(void
 
 	check_bugs();
 
-	acpi_early_init(); /* before LAPIC and SMP init */
-
 	/* Do the rest non-__init'ed, we're now alive */
 	rest_init();
 }
@@ -671,6 +669,14 @@ static int init(void * unused)
 	 */
 	child_reaper = current;
 
+	/*
+	 * Do this before initcalls, because some drivers want to access
+	 * firmware files.
+	 */
+	populate_rootfs();
+
+	acpi_early_init(); /* before LAPIC and SMP init */
+
 	/* Sets up cpus_possible() */
 	smp_prepare_cpus(max_cpus);
 
@@ -682,12 +688,6 @@ static int init(void * unused)
 
 	cpuset_init_smp();
 
-	/*
-	 * Do this before initcalls, because some drivers want to access
-	 * firmware files.
-	 */
-	populate_rootfs();
-
 	do_basic_setup();
 
 	/*

jwltest-b44-alloc.patch:
 b44.c |  134 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----
 b44.h |    2 
 2 files changed, 128 insertions(+), 8 deletions(-)

--- NEW FILE jwltest-b44-alloc.patch ---
--- linux-2.6.13/drivers/net/b44.c.orig	2005-10-21 15:41:30.000000000 -0400
+++ linux-2.6.13/drivers/net/b44.c	2005-10-21 15:56:03.000000000 -0400
@@ -107,6 +107,29 @@
 static void b44_poll_controller(struct net_device *dev);
 #endif
 
+static int dma_desc_align_mask;
+static int dma_desc_sync_size;
+
+static inline void b44_sync_dma_desc_for_device(struct pci_dev *pdev,
+                                                dma_addr_t dma_base,
+                                                unsigned long offset,
+                                                enum dma_data_direction dir)
+{
+	dma_sync_single_range_for_device(&pdev->dev, dma_base,
+	                                 offset & dma_desc_align_mask,
+	                                 dma_desc_sync_size, dir);
+}
+
+static inline void b44_sync_dma_desc_for_cpu(struct pci_dev *pdev,
+                                             dma_addr_t dma_base,
+                                             unsigned long offset,
+                                             enum dma_data_direction dir)
+{
+	dma_sync_single_range_for_cpu(&pdev->dev, dma_base,
+	                              offset & dma_desc_align_mask,
+	                              dma_desc_sync_size, dir);
+}
+
 static inline unsigned long br32(const struct b44 *bp, unsigned long reg)
 {
 	return readl(bp->regs + reg);
@@ -669,6 +692,11 @@
 	dp->ctrl = cpu_to_le32(ctrl);
 	dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset);
 
+	if (bp->flags & B44_FLAG_RX_RING_HACK)
+		b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma,
+		                             dest_idx * sizeof(dp),
+		                             DMA_BIDIRECTIONAL);
+
 	return RX_PKT_BUF_SZ;
 }
 
@@ -693,6 +721,11 @@
 	pci_unmap_addr_set(dest_map, mapping,
 			   pci_unmap_addr(src_map, mapping));
 
+	if (bp->flags & B44_FLAG_RX_RING_HACK)
+		b44_sync_dma_desc_for_cpu(bp->pdev, bp->rx_ring_dma,
+		                          src_idx * sizeof(src_desc),
+		                          DMA_BIDIRECTIONAL);
+
 	ctrl = src_desc->ctrl;
 	if (dest_idx == (B44_RX_RING_SIZE - 1))
 		ctrl |= cpu_to_le32(DESC_CTRL_EOT);
@@ -701,8 +734,14 @@
 
 	dest_desc->ctrl = ctrl;
 	dest_desc->addr = src_desc->addr;
+
 	src_map->skb = NULL;
 
+	if (bp->flags & B44_FLAG_RX_RING_HACK)
+		b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma,
+		                             dest_idx * sizeof(dest_desc),
+		                             DMA_BIDIRECTIONAL);
+
 	pci_dma_sync_single_for_device(bp->pdev, src_desc->addr,
 				       RX_PKT_BUF_SZ,
 				       PCI_DMA_FROMDEVICE);
@@ -960,6 +999,11 @@
 	bp->tx_ring[entry].ctrl = cpu_to_le32(ctrl);
 	bp->tx_ring[entry].addr = cpu_to_le32((u32) mapping+bp->dma_offset);
 
+	if (bp->flags & B44_FLAG_TX_RING_HACK)
+		b44_sync_dma_desc_for_device(bp->pdev, bp->tx_ring_dma,
+		                             entry * sizeof(bp->tx_ring[0]),
+		                             DMA_TO_DEVICE);
+
 	entry = NEXT_TX(entry);
 
 	bp->tx_prod = entry;
@@ -1065,6 +1109,16 @@
 	memset(bp->rx_ring, 0, B44_RX_RING_BYTES);
 	memset(bp->tx_ring, 0, B44_TX_RING_BYTES);
 
+	if (bp->flags & B44_FLAG_RX_RING_HACK)
+		dma_sync_single_for_device(&bp->pdev->dev, bp->rx_ring_dma,
+		                           DMA_TABLE_BYTES,
+		                           PCI_DMA_BIDIRECTIONAL);
+
+	if (bp->flags & B44_FLAG_TX_RING_HACK)
+		dma_sync_single_for_device(&bp->pdev->dev, bp->tx_ring_dma,
+		                           DMA_TABLE_BYTES,
+		                           PCI_DMA_TODEVICE);
+
 	for (i = 0; i < bp->rx_pending; i++) {
 		if (b44_alloc_rx_skb(bp, -1, i) < 0)
 			break;
@@ -1086,14 +1140,28 @@
 		bp->tx_buffers = NULL;
 	}
 	if (bp->rx_ring) {
-		pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
-				    bp->rx_ring, bp->rx_ring_dma);
+		if (bp->flags & B44_FLAG_RX_RING_HACK) {
+			dma_unmap_single(&bp->pdev->dev, bp->rx_ring_dma,
+				         DMA_TABLE_BYTES,
+				         DMA_BIDIRECTIONAL);
+			kfree(bp->rx_ring);
+		} else
+			pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
+					    bp->rx_ring, bp->rx_ring_dma);
 		bp->rx_ring = NULL;
+		bp->flags &= ~B44_FLAG_RX_RING_HACK;
 	}
 	if (bp->tx_ring) {
-		pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
-				    bp->tx_ring, bp->tx_ring_dma);
+		if (bp->flags & B44_FLAG_TX_RING_HACK) {
+			dma_unmap_single(&bp->pdev->dev, bp->tx_ring_dma,
+				         DMA_TABLE_BYTES,
+				         DMA_TO_DEVICE);
+			kfree(bp->tx_ring);
+		} else
+			pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
+					    bp->tx_ring, bp->tx_ring_dma);
 		bp->tx_ring = NULL;
+		bp->flags &= ~B44_FLAG_TX_RING_HACK;
 	}
 }
 
@@ -1119,12 +1187,56 @@
 
 	size = DMA_TABLE_BYTES;
 	bp->rx_ring = pci_alloc_consistent(bp->pdev, size, &bp->rx_ring_dma);
-	if (!bp->rx_ring)
-		goto out_err;
+	if (!bp->rx_ring) {
+		/* Allocation may have failed due to pci_alloc_consistent
+		   insisting on use of GFP_DMA, which is more restrictive
+		   than necessary...  */
+		struct dma_desc *rx_ring;
+		dma_addr_t rx_ring_dma;
+
+		if (!(rx_ring = (struct dma_desc *)kmalloc(size, GFP_KERNEL)))
+			goto out_err;
+
+		memset(rx_ring, 0, size);
+		rx_ring_dma = dma_map_single(&bp->pdev->dev, rx_ring,
+		                             DMA_TABLE_BYTES,
+		                             DMA_BIDIRECTIONAL);
+
+		if (rx_ring_dma + size > B44_DMA_MASK) {
+			kfree(rx_ring);
+			goto out_err;
+		}
+
+		bp->rx_ring = rx_ring;
+		bp->rx_ring_dma = rx_ring_dma;
+		bp->flags |= B44_FLAG_RX_RING_HACK;
+	}
 
 	bp->tx_ring = pci_alloc_consistent(bp->pdev, size, &bp->tx_ring_dma);
-	if (!bp->tx_ring)
-		goto out_err;
+	if (!bp->tx_ring) {
+		/* Allocation may have failed due to pci_alloc_consistent
+		   insisting on use of GFP_DMA, which is more restrictive
+		   than necessary...  */
+		struct dma_desc *tx_ring;
+		dma_addr_t tx_ring_dma;
+
+		if (!(tx_ring = (struct dma_desc *)kmalloc(size, GFP_KERNEL)))
+			goto out_err;
+
+		memset(tx_ring, 0, size);
+		tx_ring_dma = dma_map_single(&bp->pdev->dev, tx_ring,
+		                             DMA_TABLE_BYTES,
+		                             DMA_TO_DEVICE);
+
+		if (tx_ring_dma + size > B44_DMA_MASK) {
+			kfree(tx_ring);
+			goto out_err;
+		}
+
+		bp->tx_ring = tx_ring;
+		bp->tx_ring_dma = tx_ring_dma;
+		bp->flags |= B44_FLAG_TX_RING_HACK;
+	}
 
 	return 0;
 
@@ -1972,6 +2084,12 @@
 
 static int __init b44_init(void)
 {
+	unsigned int dma_desc_align_size = dma_get_cache_alignment();
+
+	/* Setup paramaters for syncing RX/TX DMA descriptors */
+	dma_desc_align_mask = ~(dma_desc_align_size - 1);
+	dma_desc_sync_size = max(dma_desc_align_size, sizeof(struct dma_desc));
+
 	return pci_module_init(&b44_driver);
 }
 
--- linux-2.6.13/drivers/net/b44.h.orig	2005-08-28 19:41:01.000000000 -0400
+++ linux-2.6.13/drivers/net/b44.h	2005-10-21 15:56:03.000000000 -0400
@@ -400,6 +400,8 @@
 #define B44_FLAG_ADV_100HALF	0x04000000
 #define B44_FLAG_ADV_100FULL	0x08000000
 #define B44_FLAG_INTERNAL_PHY	0x10000000
+#define B44_FLAG_RX_RING_HACK	0x20000000
+#define B44_FLAG_TX_RING_HACK	0x40000000
 
 	u32			rx_offset;
 

jwltest-dma-x86_64.patch:
 dma-mapping.h |   31 +++++++++++++++++++++++++++----
 1 files changed, 27 insertions(+), 4 deletions(-)

--- NEW FILE jwltest-dma-x86_64.patch ---
--- linux-2.6.14/include/asm-x86_64/dma-mapping.h.orig	2005-11-07 16:16:16.000000000 -0500
+++ linux-2.6.14/include/asm-x86_64/dma-mapping.h	2005-11-07 16:16:37.000000000 -0500
@@ -85,10 +85,33 @@ static inline void dma_sync_single_for_d
 	flush_write_buffers();
 }
 
-#define dma_sync_single_range_for_cpu(dev, dma_handle, offset, size, dir)       \
-        dma_sync_single_for_cpu(dev, dma_handle, size, dir)
-#define dma_sync_single_range_for_device(dev, dma_handle, offset, size, dir)    \
-        dma_sync_single_for_device(dev, dma_handle, size, dir)
+static inline void dma_sync_single_range_for_cpu(struct device *hwdev,
+						 dma_addr_t dma_handle,
+						 unsigned long offset,
+						 size_t size, int direction)
+{
+	if (direction == DMA_NONE)
+		out_of_line_bug();
+
+	if (swiotlb)
+		return swiotlb_sync_single_for_cpu(hwdev,dma_handle,offset+size,direction);
+
+	flush_write_buffers();
+}
+
+static inline void dma_sync_single_range_for_device(struct device *hwdev,
+						    dma_addr_t dma_handle,
+						    unsigned long offset,
+						    size_t size, int direction)
+{
+        if (direction == DMA_NONE)
+		out_of_line_bug();
+
+	if (swiotlb)
+		return swiotlb_sync_single_for_device(hwdev,dma_handle,offset+size,direction);
+
+	flush_write_buffers();
+}
 
 static inline void dma_sync_sg_for_cpu(struct device *hwdev,
 				       struct scatterlist *sg,

jwltest-ia64-dma-get-cache-align.patch:
 arch/ia64/kernel/setup.c       |    7 +++++++
 include/asm-ia64/dma-mapping.h |    7 +------
 2 files changed, 8 insertions(+), 6 deletions(-)

--- NEW FILE jwltest-ia64-dma-get-cache-align.patch ---
--- linux-2.6.13/include/asm-ia64/dma-mapping.h.orig	2005-08-28 19:41:01.000000000 -0400
+++ linux-2.6.13/include/asm-ia64/dma-mapping.h	2005-10-21 15:55:21.000000000 -0400
@@ -48,12 +48,7 @@
 	return 0;
 }
 
-static inline int
-dma_get_cache_alignment (void)
-{
-	extern int ia64_max_cacheline_size;
-	return ia64_max_cacheline_size;
-}
+extern int dma_get_cache_alignment(void);
 
 static inline void
 dma_cache_sync (void *vaddr, size_t size, enum dma_data_direction dir)
--- linux-2.6.13/arch/ia64/kernel/setup.c.orig	2005-08-28 19:41:01.000000000 -0400
+++ linux-2.6.13/arch/ia64/kernel/setup.c	2005-10-21 15:55:21.000000000 -0400
@@ -79,6 +79,13 @@
 unsigned long vga_console_membase;
 
 unsigned long ia64_max_cacheline_size;
+
+int dma_get_cache_alignment(void)
+{
+        return ia64_max_cacheline_size;
+}
+EXPORT_SYMBOL(dma_get_cache_alignment);
+
 unsigned long ia64_iobase;	/* virtual address for I/O accesses */
 EXPORT_SYMBOL(ia64_iobase);
 struct io_space io_space[MAX_IO_SPACES];

jwltest-sky2.patch:
 Kconfig       |   18 
 Makefile      |    1 
 sky2.c        | 3040 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 sky2.h        | 1910 ++++++++++++++++++++++++++++++++++++
 sky2_compat.h |    6 
 5 files changed, 4975 insertions(+)

--- NEW FILE jwltest-sky2.patch ---
--- linux-2.6.14/drivers/net/sky2.h.orig	2005-11-14 09:45:48.000000000 -0500
+++ linux-2.6.14/drivers/net/sky2.h	2005-11-14 09:45:56.000000000 -0500
@@ -0,0 +1,1910 @@
+/*
+ * Definitions for the new Marvell Yukon 2 driver.
+ */
+#ifndef _SKY2_H
+#define _SKY2_H
+
+/* PCI config registers */
+#define PCI_DEV_REG1	0x40
+#define PCI_DEV_REG2	0x44
+#define PCI_DEV_STATUS  0x7c
+#define PCI_OS_PCI_X    (1<<26)
+
+#define PEX_LNK_STAT	0xf2
+#define PEX_UNC_ERR_STAT 0x104
+#define PEX_DEV_CTRL	0xe8
+
+/* Yukon-2 */
+enum pci_dev_reg_1 {
+	PCI_Y2_PIG_ENA	 = 1<<31, /* Enable Plug-in-Go (YUKON-2) */
+	PCI_Y2_DLL_DIS	 = 1<<30, /* Disable PCI DLL (YUKON-2) */
+	PCI_Y2_PHY2_COMA = 1<<29, /* Set PHY 2 to Coma Mode (YUKON-2) */
+	PCI_Y2_PHY1_COMA = 1<<28, /* Set PHY 1 to Coma Mode (YUKON-2) */
+	PCI_Y2_PHY2_POWD = 1<<27, /* Set PHY 2 to Power Down (YUKON-2) */
+	PCI_Y2_PHY1_POWD = 1<<26, /* Set PHY 1 to Power Down (YUKON-2) */
+};
+
+enum pci_dev_reg_2 {
+	PCI_VPD_WR_THR	= 0xffL<<24,	/* Bit 31..24:	VPD Write Threshold */
+	PCI_DEV_SEL	= 0x7fL<<17,	/* Bit 23..17:	EEPROM Device Select */
+	PCI_VPD_ROM_SZ	= 7L<<14,	/* Bit 16..14:	VPD ROM Size	*/
+
+	PCI_PATCH_DIR	= 0xfL<<8,	/* Bit 11.. 8:	Ext Patches dir 3..0 */
+	PCI_EXT_PATCHS	= 0xfL<<4,	/* Bit	7.. 4:	Extended Patches 3..0 */
+	PCI_EN_DUMMY_RD	= 1<<3,		/* Enable Dummy Read */
+	PCI_REV_DESC	= 1<<2,		/* Reverse Desc. Bytes */
+
+	PCI_USEDATA64	= 1<<0,		/* Use 64Bit Data bus ext */
+};
+
+
+#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
+			       PCI_STATUS_SIG_SYSTEM_ERROR | \
+			       PCI_STATUS_REC_MASTER_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_PARITY)
+
+enum pex_dev_ctrl {
+	PEX_DC_MAX_RRS_MSK	= 7<<12, /* Bit 14..12:	Max. Read Request Size */
+	PEX_DC_EN_NO_SNOOP	= 1<<11,/* Enable No Snoop */
+	PEX_DC_EN_AUX_POW	= 1<<10,/* Enable AUX Power */
+	PEX_DC_EN_PHANTOM	= 1<<9,	/* Enable Phantom Functions */
+	PEX_DC_EN_EXT_TAG	= 1<<8,	/* Enable Extended Tag Field */
+	PEX_DC_MAX_PLS_MSK	= 7<<5,	/* Bit  7.. 5:	Max. Payload Size Mask */
+	PEX_DC_EN_REL_ORD	= 1<<4,	/* Enable Relaxed Ordering */
+	PEX_DC_EN_UNS_RQ_RP	= 1<<3,	/* Enable Unsupported Request Reporting */
+	PEX_DC_EN_FAT_ER_RP	= 1<<2,	/* Enable Fatal Error Reporting */
+	PEX_DC_EN_NFA_ER_RP	= 1<<1,	/* Enable Non-Fatal Error Reporting */
+	PEX_DC_EN_COR_ER_RP	= 1<<0,	/* Enable Correctable Error Reporting */
+};
+#define  PEX_DC_MAX_RD_RQ_SIZE(x) (((x)<<12) & PEX_DC_MAX_RRS_MSK)
+
+/* PEX_UNC_ERR_STAT	 PEX Uncorrectable Errors Status Register (Yukon-2) */
+enum pex_err {
+	PEX_UNSUP_REQ 	= 1<<20, /* Unsupported Request Error */
+
+	PEX_MALFOR_TLP	= 1<<18, /* Malformed TLP */
+
+	PEX_UNEXP_COMP	= 1<<16, /* Unexpected Completion */
+
+	PEX_COMP_TO	= 1<<14, /* Completion Timeout */
+	PEX_FLOW_CTRL_P	= 1<<13, /* Flow Control Protocol Error */
+	PEX_POIS_TLP	= 1<<12, /* Poisoned TLP */
+
+	PEX_DATA_LINK_P = 1<<4,	/* Data Link Protocol Error */
+	PEX_FATAL_ERRORS= (PEX_MALFOR_TLP | PEX_FLOW_CTRL_P | PEX_DATA_LINK_P),
+};
+
+
+enum csr_regs {
+	B0_RAP		= 0x0000,
+	B0_CTST		= 0x0004,
+	B0_Y2LED	= 0x0005,
+	B0_POWER_CTRL	= 0x0007,
+	B0_ISRC		= 0x0008,
+	B0_IMSK		= 0x000c,
+	B0_HWE_ISRC	= 0x0010,
+	B0_HWE_IMSK	= 0x0014,
+
+	/* Special ISR registers (Yukon-2 only) */
+	B0_Y2_SP_ISRC2	= 0x001c,
+	B0_Y2_SP_ISRC3	= 0x0020,
+	B0_Y2_SP_EISR	= 0x0024,
+	B0_Y2_SP_LISR	= 0x0028,
+	B0_Y2_SP_ICR	= 0x002c,
+
+	B2_MAC_1	= 0x0100,
+	B2_MAC_2	= 0x0108,
+	B2_MAC_3	= 0x0110,
+	B2_CONN_TYP	= 0x0118,
+	B2_PMD_TYP	= 0x0119,
+	B2_MAC_CFG	= 0x011a,
+	B2_CHIP_ID	= 0x011b,
+	B2_E_0		= 0x011c,
+
+	B2_Y2_CLK_GATE  = 0x011d,
+	B2_Y2_HW_RES	= 0x011e,
+	B2_E_3		= 0x011f,
+	B2_Y2_CLK_CTRL	= 0x0120,
+
+	B2_TI_INI	= 0x0130,
+	B2_TI_VAL	= 0x0134,
+	B2_TI_CTRL	= 0x0138,
+	B2_TI_TEST	= 0x0139,
+
+	B2_TST_CTRL1	= 0x0158,
+	B2_TST_CTRL2	= 0x0159,
+	B2_GP_IO	= 0x015c,
+
+	B2_I2C_CTRL	= 0x0160,
+	B2_I2C_DATA	= 0x0164,
+	B2_I2C_IRQ	= 0x0168,
+	B2_I2C_SW	= 0x016c,
+
+	B3_RAM_ADDR	= 0x0180,
+	B3_RAM_DATA_LO	= 0x0184,
+	B3_RAM_DATA_HI	= 0x0188,
+
+/* RAM Interface Registers */
+/* Yukon-2: use RAM_BUFFER() to access the RAM buffer */
+/*
+ * The HW-Spec. calls this registers Timeout Value 0..11. But this names are
+ * not usable in SW. Please notice these are NOT real timeouts, these are
+ * the number of qWords transferred continuously.
+ */
+#define RAM_BUFFER(port, reg)	(reg | (port <<6))
+
+	B3_RI_WTO_R1	= 0x0190,
+	B3_RI_WTO_XA1	= 0x0191,
+	B3_RI_WTO_XS1	= 0x0192,
+	B3_RI_RTO_R1	= 0x0193,
+	B3_RI_RTO_XA1	= 0x0194,
+	B3_RI_RTO_XS1	= 0x0195,
+	B3_RI_WTO_R2	= 0x0196,
+	B3_RI_WTO_XA2	= 0x0197,
+	B3_RI_WTO_XS2	= 0x0198,
+	B3_RI_RTO_R2	= 0x0199,
+	B3_RI_RTO_XA2	= 0x019a,
+	B3_RI_RTO_XS2	= 0x019b,
+	B3_RI_TO_VAL	= 0x019c,
+	B3_RI_CTRL	= 0x01a0,
+	B3_RI_TEST	= 0x01a2,
+	B3_MA_TOINI_RX1	= 0x01b0,
+	B3_MA_TOINI_RX2	= 0x01b1,
+	B3_MA_TOINI_TX1	= 0x01b2,
+	B3_MA_TOINI_TX2	= 0x01b3,
+	B3_MA_TOVAL_RX1	= 0x01b4,
+	B3_MA_TOVAL_RX2	= 0x01b5,
+	B3_MA_TOVAL_TX1	= 0x01b6,
+	B3_MA_TOVAL_TX2	= 0x01b7,
+	B3_MA_TO_CTRL	= 0x01b8,
+	B3_MA_TO_TEST	= 0x01ba,
+	B3_MA_RCINI_RX1	= 0x01c0,
+	B3_MA_RCINI_RX2	= 0x01c1,
+	B3_MA_RCINI_TX1	= 0x01c2,
+	B3_MA_RCINI_TX2	= 0x01c3,
+	B3_MA_RCVAL_RX1	= 0x01c4,
+	B3_MA_RCVAL_RX2	= 0x01c5,
+	B3_MA_RCVAL_TX1	= 0x01c6,
+	B3_MA_RCVAL_TX2	= 0x01c7,
+	B3_MA_RC_CTRL	= 0x01c8,
+	B3_MA_RC_TEST	= 0x01ca,
+	B3_PA_TOINI_RX1	= 0x01d0,
+	B3_PA_TOINI_RX2	= 0x01d4,
+	B3_PA_TOINI_TX1	= 0x01d8,
+	B3_PA_TOINI_TX2	= 0x01dc,
+	B3_PA_TOVAL_RX1	= 0x01e0,
+	B3_PA_TOVAL_RX2	= 0x01e4,
+	B3_PA_TOVAL_TX1	= 0x01e8,
+	B3_PA_TOVAL_TX2	= 0x01ec,
+	B3_PA_CTRL	= 0x01f0,
+	B3_PA_TEST	= 0x01f2,
+
+	Y2_CFG_SPC	= 0x1c00,
+};
+
+/*	B0_CTST			16 bit	Control/Status register */
+enum {
+	Y2_VMAIN_AVAIL	= 1<<17,/* VMAIN available (YUKON-2 only) */
+	Y2_VAUX_AVAIL	= 1<<16,/* VAUX available (YUKON-2 only) */
+	Y2_ASF_ENABLE	= 1<<13,/* ASF Unit Enable (YUKON-2 only) */
+	Y2_ASF_DISABLE	= 1<<12,/* ASF Unit Disable (YUKON-2 only) */
+	Y2_CLK_RUN_ENA	= 1<<11,/* CLK_RUN Enable  (YUKON-2 only) */
+	Y2_CLK_RUN_DIS	= 1<<10,/* CLK_RUN Disable (YUKON-2 only) */
+	Y2_LED_STAT_ON	= 1<<9, /* Status LED On  (YUKON-2 only) */
+	Y2_LED_STAT_OFF	= 1<<8, /* Status LED Off (YUKON-2 only) */
+
[...4603 lines suppressed...]
+		goto err_out_free_regions;
+	}
+
+	memset(hw, 0, sizeof(*hw));
+	hw->pdev = pdev;
+	spin_lock_init(&hw->phy_lock);
+
+	hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
+	if (!hw->regs) {
+		printk(KERN_ERR PFX "%s: cannot map device registers\n",
+		       pci_name(pdev));
+		goto err_out_free_hw;
+	}
+	hw->pm_cap = pm_cap;
+
+	err = sky2_reset(hw);
+	if (err)
+		goto err_out_iounmap;
+
+	printk(KERN_INFO PFX "addr 0x%lx irq %d Yukon-%s (0x%x) rev %d\n",
+	       pci_resource_start(pdev, 0), pdev->irq,
+	       yukon_name[hw->chip_id - CHIP_ID_YUKON],
+	       hw->chip_id, hw->chip_rev);
+
+	dev = sky2_init_netdev(hw, 0, using_dac);
+	if (!dev)
+		goto err_out_free_pci;
+
+	err = register_netdev(dev);
+	if (err) {
+		printk(KERN_ERR PFX "%s: cannot register net device\n",
+		       pci_name(pdev));
+		goto err_out_free_netdev;
+	}
+
+	sky2_show_addr(dev);
+
+	if (hw->ports > 1 && (dev1 = sky2_init_netdev(hw, 1, using_dac))) {
+		if (register_netdev(dev1) == 0)
+			sky2_show_addr(dev1);
+		else {
+			/* Failure to register second port need not be fatal */
+			printk(KERN_WARNING PFX
+			       "register of second port failed\n");
+			hw->dev[1] = NULL;
+			free_netdev(dev1);
+		}
+	}
+
+	err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw);
+	if (err) {
+		printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
+		       pci_name(pdev), pdev->irq);
+		goto err_out_unregister;
+	}
+
+	hw->intr_mask = Y2_IS_BASE;
+	sky2_write32(hw, B0_IMSK, hw->intr_mask);
+
+	pci_set_drvdata(pdev, hw);
+
+	return 0;
+
+err_out_unregister:
+	if (dev1) {
+		unregister_netdev(dev1);
+		free_netdev(dev1);
+	}
+	unregister_netdev(dev);
+err_out_free_netdev:
+	free_netdev(dev);
+err_out_free_pci:
+	sky2_write8(hw, B0_CTST, CS_RST_SET);
+	pci_free_consistent(hw->pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
+err_out_iounmap:
+	iounmap(hw->regs);
+err_out_free_hw:
+	kfree(hw);
+err_out_free_regions:
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+err_out:
+	return err;
+}
+
+static void __devexit sky2_remove(struct pci_dev *pdev)
+{
+	struct sky2_hw *hw = pci_get_drvdata(pdev);
+	struct net_device *dev0, *dev1;
+
+	if (!hw)
+		return;
+
+	dev0 = hw->dev[0];
+	dev1 = hw->dev[1];
+	if (dev1)
+		unregister_netdev(dev1);
+	unregister_netdev(dev0);
+
+	sky2_write32(hw, B0_IMSK, 0);
+	sky2_set_power_state(hw, PCI_D3hot);
+	sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
+	sky2_write8(hw, B0_CTST, CS_RST_SET);
+	sky2_read8(hw, B0_CTST);
+
+	free_irq(pdev->irq, hw);
+	pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+
+	if (dev1)
+		free_netdev(dev1);
+	free_netdev(dev0);
+	iounmap(hw->regs);
+	kfree(hw);
+
+	pci_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct sky2_hw *hw = pci_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		struct net_device *dev = hw->dev[i];
+
+		if (dev) {
+			if (!netif_running(dev))
+				continue;
+
+			sky2_down(dev);
+			netif_device_detach(dev);
+		}
+	}
+
+	return sky2_set_power_state(hw, pci_choose_state(pdev, state));
+}
+
+static int sky2_resume(struct pci_dev *pdev)
+{
+	struct sky2_hw *hw = pci_get_drvdata(pdev);
+	int i;
+
+	pci_restore_state(pdev);
+	pci_enable_wake(pdev, PCI_D0, 0);
+	sky2_set_power_state(hw, PCI_D0);
+
+	sky2_reset(hw);
+
+	for (i = 0; i < 2; i++) {
+		struct net_device *dev = hw->dev[i];
+		if (dev) {
+			if (netif_running(dev)) {
+				netif_device_attach(dev);
+				sky2_up(dev);
+			}
+		}
+	}
+	return 0;
+}
+#endif
+
+static struct pci_driver sky2_driver = {
+	.name = DRV_NAME,
+	.id_table = sky2_id_table,
+	.probe = sky2_probe,
+	.remove = __devexit_p(sky2_remove),
+#ifdef CONFIG_PM
+	.suspend = sky2_suspend,
+	.resume = sky2_resume,
+#endif
+};
+
+static int __init sky2_init_module(void)
+{
+	return pci_module_init(&sky2_driver);
+}
+
+static void __exit sky2_cleanup_module(void)
+{
+	pci_unregister_driver(&sky2_driver);
+}
+
+module_init(sky2_init_module);
+module_exit(sky2_cleanup_module);
+
+MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
+MODULE_AUTHOR("Stephen Hemminger <shemminger osdl org>");
+MODULE_LICENSE("GPL");
--- linux-2.6.14/drivers/net/sky2_compat.h.orig	2005-11-14 09:56:09.000000000 -0500
+++ linux-2.6.14/drivers/net/sky2_compat.h	2005-11-14 09:56:02.000000000 -0500
@@ -0,0 +1,6 @@
+#ifndef __SKY2_COMPAT_H__
+#define __SKY2_COMPAT_H__
+
+#define netif_rx_schedule_test(dev) netif_rx_schedule_prep(dev)
+
+#endif /* __SKY2_COMPAT_H__ */

jwltest-sundance-fixes.patch:
 sundance.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

--- NEW FILE jwltest-sundance-fixes.patch ---
--- linux-2.6.12/drivers/net/sundance.c.orig	2005-09-01 15:07:13.000000000 -0400
+++ linux-2.6.12/drivers/net/sundance.c	2005-09-09 10:34:46.312973375 -0400
@@ -611,7 +611,7 @@ static int __devinit sundance_probe1 (st
 		int phy, phy_idx = 0;
 		np->phys[0] = 1;		/* Default setting */
 		np->mii_preamble_required++;
-		for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
+		for (phy = 0; phy < 32 && phy_idx < MII_CNT; phy++) {
 			int mii_status = mdio_read(dev, phy, MII_BMSR);
 			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
 				np->phys[phy_idx++] = phy;
@@ -694,7 +694,8 @@ static int __devinit sundance_probe1 (st
 	/* Reset the chip to erase previous misconfiguration. */
 	if (netif_msg_hw(np))
 		printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl));
-	iowrite16(0x007f, ioaddr + ASICCtrl + 2);
+
+	iowrite16(0x00ff, ioaddr + ASICCtrl + 2);
 	if (netif_msg_hw(np))
 		printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl));
 

jwltest-via-rhine-update.patch:
 via-rhine.c |   38 ++++++++++++++++++++++++++++++++++----
 1 files changed, 34 insertions(+), 4 deletions(-)

--- NEW FILE jwltest-via-rhine-update.patch ---
--- linux-2.6.14/drivers/net/via-rhine.c.orig	2005-11-07 15:52:47.000000000 -0500
+++ linux-2.6.14/drivers/net/via-rhine.c	2005-11-07 15:52:53.000000000 -0500
@@ -490,6 +490,8 @@ struct rhine_private {
 	u8 tx_thresh, rx_thresh;
 
 	struct mii_if_info mii_if;
+	struct work_struct tx_timeout_task;
+	struct work_struct check_media_task;
 	void __iomem *base;
 };
 
@@ -497,6 +499,8 @@ static int  mdio_read(struct net_device 
 static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
 static int  rhine_open(struct net_device *dev);
 static void rhine_tx_timeout(struct net_device *dev);
+static void rhine_tx_timeout_task(struct net_device *dev);
+static void rhine_check_media_task(struct net_device *dev);
 static int  rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
 static void rhine_tx(struct net_device *dev);
@@ -814,8 +818,9 @@ static int __devinit rhine_init_one(stru
 
 	for (i = 0; i < 6; i++)
 		dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i);
+	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
-	if (!is_valid_ether_addr(dev->dev_addr)) {
+	if (!is_valid_ether_addr(dev->perm_addr)) {
 		rc = -EIO;
 		printk(KERN_ERR "Invalid MAC address\n");
 		goto err_out_unmap;
@@ -850,6 +855,12 @@ static int __devinit rhine_init_one(stru
 	if (rp->quirks & rqRhineI)
 		dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
 
+	INIT_WORK(&rp->tx_timeout_task,
+		  (void (*)(void *))rhine_tx_timeout_task, dev);
+
+	INIT_WORK(&rp->check_media_task,
+		  (void (*)(void *))rhine_check_media_task, dev);
+
 	/* dev->name not defined before register_netdev()! */
 	rc = register_netdev(dev);
 	if (rc)
@@ -1076,6 +1087,11 @@ static void rhine_check_media(struct net
 		   ioaddr + ChipCmd1);
 }
 
+static void rhine_check_media_task(struct net_device *dev)
+{
+	rhine_check_media(dev, 0);
+}
+
 static void init_registers(struct net_device *dev)
 {
 	struct rhine_private *rp = netdev_priv(dev);
@@ -1129,8 +1145,8 @@ static void rhine_disable_linkmon(void _
 	if (quirks & rqRhineI) {
 		iowrite8(0x01, ioaddr + MIIRegAddr);	// MII_BMSR
 
-		/* Can be called from ISR. Evil. */
-		mdelay(1);
+		/* Do not call from ISR! */
+		msleep(1);
 
 		/* 0x80 must be set immediately before turning it off */
 		iowrite8(0x80, ioaddr + MIICmd);
@@ -1220,6 +1236,16 @@ static int rhine_open(struct net_device 
 static void rhine_tx_timeout(struct net_device *dev)
 {
 	struct rhine_private *rp = netdev_priv(dev);
+
+	/*
+	 * Move bulk of work outside of interrupt context
+	 */
+	schedule_work(&rp->tx_timeout_task);
+}
+
+static void rhine_tx_timeout_task(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
 	void __iomem *ioaddr = rp->base;
 
 	printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
@@ -1625,7 +1651,7 @@ static void rhine_error(struct net_devic
 	spin_lock(&rp->lock);
 
 	if (intr_status & IntrLinkChange)
-		rhine_check_media(dev, 0);
+		schedule_work(&rp->check_media_task);
 	if (intr_status & IntrStatsMax) {
 		rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
 		rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
@@ -1829,6 +1855,7 @@ static struct ethtool_ops netdev_ethtool
 	.set_wol		= rhine_set_wol,
 	.get_sg			= ethtool_op_get_sg,
 	.get_tx_csum		= ethtool_op_get_tx_csum,
+	.get_perm_addr		= ethtool_op_get_perm_addr,
 };
 
 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
@@ -1872,6 +1899,9 @@ static int rhine_close(struct net_device
 	spin_unlock_irq(&rp->lock);
 
 	free_irq(rp->pdev->irq, dev);
+
+	flush_scheduled_work();
+
 	free_rbufs(dev);
 	free_tbufs(dev);
 	free_ring(dev);

jwltest-via-velocity-tx_csum.patch:
 via-velocity.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)

--- NEW FILE jwltest-via-velocity-tx_csum.patch ---
--- linux-2.6.14/drivers/net/via-velocity.c.orig	2005-11-21 15:35:06.000000000 -0500
+++ linux-2.6.14/drivers/net/via-velocity.c	2005-11-21 15:39:35.000000000 -0500
@@ -166,7 +166,7 @@ VELOCITY_PARAM(enable_tagging, "Enable 8
 */
 VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned");
 
-#define TX_CSUM_DEF     1
+#define TX_CSUM_DEF     0
 /* txcsum_offload[] is used for setting the checksum offload ability of NIC.
    (We only support RX checksum offload now)
    0: disable csum_offload[checksum offload


Index: kernel-2.6.spec
===================================================================
RCS file: /cvs/dist/rpms/kernel/FC-4/kernel-2.6.spec,v
retrieving revision 1.1520
retrieving revision 1.1520.2.1
diff -u -r1.1520 -r1.1520.2.1
--- kernel-2.6.spec	29 Nov 2005 17:49:34 -0000	1.1520
+++ kernel-2.6.spec	29 Nov 2005 20:40:56 -0000	1.1520.2.1
@@ -19,7 +19,8 @@
 %define sublevel 14
 %define kversion 2.6.%{sublevel}
 %define rpmversion 2.6.%{sublevel}
-%define rhbsys  %([ -r /etc/beehive-root -o -n "%{?__beehive_build}" ] && echo || echo .`whoami`)
+#%define rhbsys  %([ -r /etc/beehive-root -o -n "%{?__beehive_build}" ] && echo || echo .`whoami`)
+%define rhbsys .jwltest.25
 %define release %(R="$Revision$"; RR="${R##: }"; echo ${RR%%?})_FC4%{rhbsys}
 %define signmodules 0
 %define make_target bzImage
@@ -153,7 +154,8 @@
 License: GPLv2
 Version: %{rpmversion}
 Release: %{release}
-ExclusiveArch: noarch %{all_x86} x86_64 ppc ppc64 sparc sparc64
+#ExclusiveArch: noarch %{all_x86} x86_64 ppc ppc64 sparc sparc64
+ExclusiveArch: noarch %{all_x86} x86_64 ppc ppc64
 ExclusiveOS: Linux
 Provides: kernel = %{version}
 Provides: kernel-drm = 4.3.0
@@ -212,6 +214,7 @@
 Patch200: linux-2.6-x86-tune-p4.patch
 Patch201: linux-2.6-x86-apic-off-by-default.patch
 Patch202: linux-2.6-x86-vga-vidfail.patch
+Patch203: jwltest-dma-x86_64.patch
 
 # 300 - 399   ppc(64)
 Patch300: linux-2.6-ppc64-build.patch
@@ -219,6 +222,8 @@
 Patch302: linux-2.6-serial-of.patch
 
 # 400 - 499   ia64
+Patch400: jwltest-ia64-dma-get-cache-align.patch
+
 # 500 - 599   s390(x)
 # 600 - 699   sparc(64)
 
@@ -304,6 +309,13 @@
 Patch1302: linux-2.6-net-atm-lanai-nodev-rmmod.patch
 Patch1303: linux-2.6-net-acenic-use-after-free.patch
 Patch1304: linux-2.6-net-sk98lin-vpd.patch
+Patch1305: jwltest-3c59x-mmio.patch
+Patch1306: jwltest-3c59x-misc.patch
+Patch1307: jwltest-sundance-fixes.patch
+Patch1308: jwltest-b44-alloc.patch
+Patch1309: jwltest-via-rhine-update.patch
+Patch1310: jwltest-sky2.patch
+Patch1311: jwltest-via-velocity-tx_csum.patch
 
 Patch1400: linux-2.6-pcmcia-disable-warning.patch
 
@@ -365,6 +377,7 @@
 Patch2001: linux-2.6-vm-silence-atomic-alloc-failures.patch
 Patch2002: linux-2.6-vm-invalidate_inode_pages2-DoS.patch
 
+Patch2100: jwltest-acpi-dsdt-initrd.patch
 
 #
 # 10000 to 20000 is for stuff that has to come last due to the
@@ -565,6 +578,8 @@
 # for the installer cd that wants to automatically fall back to textmode
 # in that case
 %patch202 -p1
+# implent dma_sync_singl_range_for_{cpu,device}
+%patch203 -p1
 
 # 
 # ppc64
@@ -576,6 +591,13 @@
 # Don't probe serial ports if they don't exist
 %patch302 -p1
 
+# 
+# ia64
+#
+
+# re-implement dma_get_cache_alignment so it works for modules
+%patch400 -p1
+
 #
 # Xen
 #
@@ -717,6 +739,20 @@
 %patch1303 -p1
 # sk98lin vpd fix
 %patch1304 -p1
+# allow 3c59x to use memory-mapped PCI I/O resources
+%patch1305 -p1
+# misc 3c59x fixes
+%patch1306 -p1
+# fixes inspired by sundance-icplus driver
+%patch1307 -p1
+# b44 dma alloc problems at open
+%patch1308 -p1
+# update via-rhine from upstream
+%patch1309 -p1
+# add sky2 driver from upstream
+%patch1310 -p1
+# via-velocity tx_csum only works for IPv4?
+%patch1311 -p1
 
 # disable pcmcia warnings
 %patch1400 -p1
@@ -817,6 +853,9 @@
 # Fix 32bit integer overflow in invalidate_inode_pages2()
 %patch2002 -p1
 
+# Add DSDT override from initrd
+%patch2100 -p1
+
 #
 # Patches 5000 to 6000 are reserved for new drivers that are about to
 # be merged upstream


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]