rpms/dovecot/FC-5 dovecot-1.0.beta8-default-settings.patch, NONE, 1.1 dovecot.spec, 1.50, 1.51

Thu Jun 8 13:20:46 UTC 2006

Author: prockai

Update of /cvs/dist/rpms/dovecot/FC-5
In directory cvs.devel.redhat.com:/tmp/cvs-serv15269

Modified Files:
	dovecot.spec 
Added Files:
	dovecot-1.0.beta8-default-settings.patch 
Log Message:
* Thu Jun 08 2006 Petr Rockai <prockai at redhat.com> - 1.0-0.beta8.2.fc5
- bring FC-5 branch up to date with the rawhide one (bugfixes only)
- should fix non-working pop3 in default installation


dovecot-1.0.beta8-default-settings.patch:
 dovecot-example.conf         |   19 ++++++++-----------
 src/master/master-settings.c |   10 +++++-----
 2 files changed, 13 insertions(+), 16 deletions(-)

--- NEW FILE dovecot-1.0.beta8-default-settings.patch ---
--- dovecot-1.0.beta8/src/master/master-settings.c.default-settings	2006-04-25 04:00:07.000000000 +0200
+++ dovecot-1.0.beta8/src/master/master-settings.c	2006-06-08 11:56:28.000000000 +0200
@@ -266,8 +266,8 @@
 	MEMBER(syslog_facility) "mail",
 
 	/* general */
-	MEMBER(protocols) "imap imaps",
-	MEMBER(listen) "*",
+	MEMBER(protocols) "imap imaps pop3 pop3s",
+	MEMBER(listen) "[::]",
 	MEMBER(ssl_listen) NULL,
 
 	MEMBER(ssl_disable) FALSE,
@@ -278,7 +278,7 @@
 	MEMBER(ssl_parameters_regenerate) 168,
 	MEMBER(ssl_cipher_list) NULL,
 	MEMBER(ssl_verify_client_cert) FALSE,
-	MEMBER(disable_plaintext_auth) TRUE,
+	MEMBER(disable_plaintext_auth) FALSE,
 	MEMBER(verbose_ssl) FALSE,
 	MEMBER(shutdown_clients) TRUE,
 	MEMBER(nfs_check) TRUE,
@@ -332,7 +332,7 @@
 	MEMBER(maildir_stat_dirs) FALSE,
 	MEMBER(maildir_copy_with_hardlinks) FALSE,
 	MEMBER(mbox_read_locks) "fcntl",
-	MEMBER(mbox_write_locks) "dotlock fcntl",
+	MEMBER(mbox_write_locks) "fcntl",
 	MEMBER(mbox_lock_timeout) 300,
 	MEMBER(mbox_dotlock_change_timeout) 120,
 	MEMBER(mbox_min_index_size) 0,
@@ -361,7 +361,7 @@
 	MEMBER(pop3_enable_last) FALSE,
 	MEMBER(pop3_reuse_xuidl) FALSE,
 	MEMBER(pop3_lock_session) FALSE,
-	MEMBER(pop3_uidl_format) NULL,
+	MEMBER(pop3_uidl_format) "%08Xu%08Xv",
 	MEMBER(pop3_client_workarounds) NULL,
 	MEMBER(pop3_logout_format) "top=%t/%p, retr=%r/%b, del=%d/%m, size=%s",
 
--- dovecot-1.0.beta8/dovecot-example.conf.default-settings	2006-04-21 04:01:27.000000000 +0200
+++ dovecot-1.0.beta8/dovecot-example.conf	2006-06-08 11:54:24.000000000 +0200
@@ -7,17 +7,14 @@
 # value inside quotes, eg.: key = "# char and trailing whitespace  "
 
 # Default values are shown after each value, it's not required to uncomment
-# any of the lines. Exception to this are paths, they're just examples
-# with real defaults being based on configure options. The paths listed here
-# are for configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
-# --with-ssldir=/etc/ssl
+# any of the lines.
 
 # Base directory where to store runtime data.
 #base_dir = /var/run/dovecot/
 
 # Protocols we want to be serving:
 #  imap imaps pop3 pop3s
-#protocols = imap imaps
+#protocols = imap imaps pop3 pop3s
 
 # IP or host address where to listen in for connections. It's not currently
 # possible to specify multiple addresses. "*" listens in all IPv4 interfaces.
@@ -36,7 +33,7 @@
 #     listen = *:10100
 #     ..
 #   }
-#listen = *
+#listen = [::]
 
 # IP or host address where to listen in for SSL connections. Defaults
 # to above if not specified.
@@ -49,8 +46,8 @@
 # dropping root privileges, so keep the key file unreadable by anyone but
 # root. Included doc/mkcert.sh can be used to easily generate self-signed
 # certificate, just make sure to update the domains in dovecot-openssl.cnf
-#ssl_cert_file = /etc/ssl/certs/dovecot.pem
-#ssl_key_file = /etc/ssl/private/dovecot.pem
+#ssl_cert_file = /etc/pki/dovecot/certs/dovecot.pem
+#ssl_key_file = /etc/pki/dovecot/private/dovecot.pem
 
 # If key file is password protected, give the password here. Alternatively
 # give it when starting dovecot with -p parameter.
@@ -74,7 +71,7 @@
 # SSL/TLS is used (LOGINDISABLED capability). Note that 127.*.*.* and
 # IPv6 ::1 addresses are considered secure, this setting has no effect if
 # you connect from those addresses.
-#disable_plaintext_auth = yes
+#disable_plaintext_auth = no
 
 # Should all IMAP and POP3 processes be killed when Dovecot master process
 # shuts down. Setting this to "no" means that Dovecot can be upgraded without
@@ -371,7 +368,7 @@
 # locking methods as well. Some operating systems don't allow using some of
 # them simultaneously.
 #mbox_read_locks = fcntl
-#mbox_write_locks = dotlock fcntl
+#mbox_write_locks = fcntl
 
 # Maximum time in seconds to wait for lock (all of them) before aborting.
 #mbox_lock_timeout = 300
@@ -547,7 +544,7 @@
   # installations. %08Xu%08Xv will be the new default, so use it for new
   # installations.
   #
-  #pop3_uidl_format = 
+  #pop3_uidl_format = %08Xu%08Xv
 
   # POP3 logout format string:
   #  %t - number of TOP commands


Index: dovecot.spec
===================================================================
RCS file: /cvs/dist/rpms/dovecot/FC-5/dovecot.spec,v
retrieving revision 1.50
retrieving revision 1.51
diff -u -r1.50 -r1.51
--- dovecot.spec	1 Jun 2006 15:10:03 -0000	1.50
+++ dovecot.spec	8 Jun 2006 13:20:42 -0000	1.51
@@ -1,7 +1,7 @@
 Summary: Dovecot Secure imap server
 Name: dovecot
 Version: 1.0
-Release: 0.beta8.1.fc5
+Release: 0.beta8.2.fc5
 License: LGPL
 Group: System Environment/Daemons
 
@@ -17,7 +17,7 @@
 Source5: migrate-users
 Source6: perfect_maildir.pl
 Source7: dovecot-REDHAT-FAQ.txt
-Patch100: dovecot-1.0.beta7-default-settings.patch
+Patch100: dovecot-1.0.beta8-default-settings.patch
 Patch101: dovecot-1.0.beta2-pam-tty.patch
 Patch102: dovecot-1.0.beta2-pam-setcred.patch
 Patch103: dovecot-1.0.beta2-mkcert-permissions.patch
@@ -212,8 +212,14 @@
 
 
 %changelog
-* Thu Jun 01 2006 Petr Rockai <prockai at redhat.com> - 1.0-0.beta8.1.fc5
+* Thu Jun 08 2006 Petr Rockai <prockai at redhat.com> - 1.0-0.beta8.2.fc5
 - bring FC-5 branch up to date with the rawhide one (bugfixes only)
+- should fix non-working pop3 in default installation
+
+* Thu Jun 08 2006 Petr Rockai <prockai at redhat.com> - 1.0-0.beta8.2
+- put back pop3_uidl_format default that got lost
+  in the beta2->beta7 upgrade (would cause pop3 to not work
+  at all in many situations)
 
 * Thu May 04 2006 Petr Rockai <prockai at redhat.com> - 1.0-0.beta8.1
 - upgrade to latest upstream beta release (beta8)


