[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

rpms/kernel/devel jwltest-ipw3945-1_0_5.patch, NONE, 1.1.4.1 kernel-2.6.spec, 1.2307, 1.2307.2.1



Author: linville

Update of /cvs/dist/rpms/kernel/devel
In directory cvs.devel.redhat.com:/tmp/cvs-serv2457

Modified Files:
      Tag: private-linville-jwltest-fc6-1-branch
	kernel-2.6.spec 
Added Files:
      Tag: private-linville-jwltest-fc6-1-branch
	jwltest-ipw3945-1_0_5.patch 
Log Message:


jwltest-ipw3945-1_0_5.patch:
 Documentation/networking/README.ipw3945 |  984 +
 drivers/net/wireless/Kconfig            |  106 
 drivers/net/wireless/Makefile           |    2 
 drivers/net/wireless/ipw3945.c          |16645 ++++++++++++++++++++++++++++++++
 drivers/net/wireless/ipw3945.h          | 2556 ++++
 drivers/net/wireless/ipw3945_daemon.h   |  403 
 6 files changed, 20696 insertions(+)

--- NEW FILE jwltest-ipw3945-1_0_5.patch ---
--- linux-2.6.16.noarch/Documentation/networking/README.ipw3945.orig	2006-06-15 12:59:52.000000000 -0400
+++ linux-2.6.16.noarch/Documentation/networking/README.ipw3945	2006-06-15 12:59:58.000000000 -0400
@@ -0,0 +1,998 @@
+
+Intel(R) PRO/Wireless 3945ABG Network Connection driver for Linux* in 
+support of:
+
+Intel(R) PRO/Wireless 3945ABG Network Connection Adapter
+Intel(R) PRO/Wireless 3945BG Network Connection Adapter
+
+Note: The Intel(R) PRO/Wireless 3945ABG Network Connection driver for 
+Linux is a unified driver that works on both hardware adapters listed 
+above. In this document the Intel(R) PRO/Wireless 3945ABG Network Connection 
+driver for Linux will be used to reference the unified driver.
+
+Copyright (C) 2005 - 2006, Intel Corporation
+
+README.ipw3945
+
+Version: 1.0.5
+Date   : May 22, 2006
+
+
+Index
+-----------------------------------------------
+0.   IMPORTANT INFORMATION BEFORE USING THIS DRIVER
+1.   Introduction
+1.1. Overview of Features
+2.   Loading the Driver
+3.   Feature Details
+3.1. LEDs
+3.2. Association Details
+3.3. Roaming Details
+3.4. Scanning Details
+3.5. Antenna Selection and "Diversity"
+3.6. IEEE 802.11h Details 
+3.7. Tx Power 
+3.8. Security Details
+3.9. Power Management
+4.   Configuring the driver
+4.1. Command Line Parameters
+4.3. Sysfs Helper Files:
+5.   Wireless Tools Details
+5.1. iwlist
+5.2. iwpriv
+5.3. iwconfig
+6.   Support
+7.   License
+
+
+===============================================
+0.   IMPORTANT INFORMATION BEFORE USING THIS DRIVER
+===============================================
+
+Important Notice FOR ALL USERS OR DISTRIBUTORS!!!! 
+
+Intel wireless LAN adapters are engineered, manufactured, tested, and
+quality checked to ensure that they meet all necessary local and
+governmental regulatory agency requirements for the regions that they
+are designated and/or marked to ship into. Since wireless LANs are
+generally unlicensed devices that share spectrum with radars,
+satellites, and other licensed and unlicensed devices, it is sometimes
+necessary to dynamically detect, avoid, and limit usage to avoid
+interference with these devices. In many instances Intel is required to
+provide test data to prove regional and local compliance to regional and
+governmental regulations before certification or approval to use the
+product is granted. Intel's wireless LAN's EEPROM, firmware, and
+software driver are designed to carefully control parameters that affect
+radio operation and to ensure electromagnetic compliance (EMC). These
+parameters include, without limitation, RF power, spectrum usage,
+channel scanning, and human exposure. 
+
+For these reasons Intel cannot permit any manipulation by third parties
+of the software provided in binary format with the wireless WLAN
+adapters (e.g., the EEPROM and firmware). Furthermore, if you use any
+patches, utilities, or code with the Intel wireless LAN adapters that
+have been manipulated by an unauthorized party (i.e., patches,
+utilities, or code (including open source code modifications) which have
+not been validated by Intel), (i) you will be solely responsible for
+ensuring the regulatory compliance of the products, (ii) Intel will bear
+no liability, under any theory of liability for any issues associated
+with the modified products, including without limitation, claims under
+the warranty and/or issues arising from regulatory non-compliance, and
+(iii) Intel will not provide or be required to assist in providing
+support to any third parties for such modified products.  
+
+Note: Many regulatory agencies consider Wireless LAN adapters to be
+modules, and accordingly, condition system-level regulatory approval
+upon receipt and review of test data documenting that the antennas and
+system configuration do not cause the EMC and radio operation to be
+non-compliant.
+
+The drivers available for download from SourceForge are provided as a 
+part of a development project.  Conformance to local regulatory 
+requirements is the responsibility of the individual developer.  As 
+such, if you are interested in deploying or shipping a driver as part of 
+solution intended to be used for purposes other than development, please 
+obtain a tested driver from Intel Customer Support at:
+
+http://support.intel.com/support/notebook/sb/CS-006408.htm
+
+
+===============================================
+1.   Introduction
+===============================================
+The following sections attempt to provide a brief introduction to using 
+the Intel(R) PRO/Wireless 3945ABG driver for Linux.
+
+This document is not meant to be a comprehensive manual on 
+understanding or using wireless technologies, but should be sufficient 
+to get you moving without wires on Linux.
+
+For information on building and installing the driver, see the INSTALL
+file.
+
+
+1.1. Overview of Features
+-----------------------------------------------
+The current release (1.0.5) supports the following features:
+
++ BSS mode (Infrastructure, Managed)
++ IBSS mode (Ad-Hoc)
++ WEP (OPEN and SHARED KEY mode)
++ 802.1x EAP via wpa_supplicant and xsupplicant
++ 802.11i (WPA/WPA2)
++ Wireless Extension support 
++ Full B and G rate support
++ Full A rate support (ABG only)
++ Transmit power control
++ S state support (ACPI suspend/resume)
+
+The following features are currently enabled, but not officially
+supported:
+
++ QoS
++ Monitor mode (aka RFMon)
++ Associated RF promiscuous mode
++ Frame Rx simulation
+
+The distinction between officially supported and enabled is a reflection 
+of the amount of validation and interoperability testing that has been
+performed on a given feature. Note: in addition, the features may not have 
+all of the code in the driver to fully enable the feature.
+
+
+===============================================
+2. Loading the Driver
+===============================================
+
+See the INSTALL document for information on installing the driver.
+
+Once installed, a typical method for launching the driver and the 
+regulatory daemon is via the load script provided in the source package:
+
+	# ./load debug=0x43fff   <--- You need to be root for this
+
+NOTE:  You will not be able to rmmod the driver so long as the 
+ipw3945d daemon is running.  
+
+If you followed the steps of the INSTALL document to set up your
+modprobe.conf, you can load the module by simply running:
+
+	# modprobe ipw3945       <--- You need to be root for this
+
+If you did not configure your modprobe.conf to automatically launch the 
+regulatory daemon (see INSTALL), you must do so manually after loading 
+the module:
+
+	# /sbin/ipw3945d	<--- You need to be root for this
+
+If you want to unload the module (and kill the deamon as well), you can 
+simply use the unload script:
+
+	# ./unload               <--- You need to be root for this
+
+or likewise if you configured modprobe.conf:
+
+	# modprobe -r ipw3945       <--- You need to be root for this
+
+If you did not configure modprobe.conf to unload the regulatory daemon 
+and are not using the unload script, you need to kill the regulatory 
+daemon before you will be able to unload the module:
+
+	# /sbin/ipw3945d --kill	<--- You need to be root for this
+	# modprobe -r ipw3945
+
+
+===============================================
+3. Feature Details
+===============================================
+
+3.1. LEDs
+-----------------------------------------------
+
+The driver will attempt to control the wireless LED, if one is 
+configured in hardware.  There are typically two LEDs:
+
+	Activity -- used to indicate wireless activity
+	Link     -- used to indicate wireless link
[...20341 lines suppressed...]
+ * a command to appear. Currently set to 60s. */
+#define DAEMON_POLL_INTERVAL 60000
+
+#define DAEMON_BUF_SIZE 3000
+
+struct daemon_cmd_hdr {
+	u8 cmd;
+	u8 flags;
+	u8 token;
+	u8 reserved1;
+	u16 version;
+	u16 data_len;
+	u8 data[0];
+} __attribute__ ((packed));
+
+struct daemon_cmd {
+	struct daemon_cmd_hdr hdr;
+	u8 data[DAEMON_BUF_SIZE];
+} __attribute__ ((packed));
+
+/*  driver <- daemon error response */
+struct daemon_error {
+	u8 cmd_requested;
+	u8 reserved1;
+	u16 reserved2;
+	s32 return_code;
+} __attribute__ ((packed));
+
+/*  driver <- daemon synchronous command done */
+struct daemon_cmd_done {
+	u8 cmd_requested;
+	u8 reserved1;
+	u16 reserved2;
+	s32 return_code;
+} __attribute__ ((packed));
+
+/*  driver <- daemon regulatory information
+ *
+ * The following is sent from the daemon to the driver
+ * to inform the driver of current channel capabilities and
+ * restrictions.
+ *
+ * Immediately after INIT is provided from the driver the
+ * daemon will send the full channel map.
+ *
+ * After a channel has been selected via rx_config, the
+ * daemon will send periodic updates when the channel limits
+ * change for a specific channel.
+ *
+ * NOTE:  The txpower field represents the current configured
+ * power as directed by either the user (sent to the daemon
+ * through the DAEMON_SYNC::DAEMON_SYNC_TXPOWER_LIMIT command)
+ * or as specified through the currently associated access
+ * point.  The max_txpower is the highest the channel is
+ * allowed to transmit.
+ *
+ */
+enum {
+	DAEMON_A_BAND = (1 << 0),	/* 0 - 2.4Ghz, 1 - 5.2Ghz */
+	DAEMON_IBSS_ALLOWED = (1 << 1),
+	DAEMON_ACTIVE_ALLOWED = (1 << 2),
+	DAEMON_RADAR_DETECT = (1 << 3),
+};
+struct daemon_channel_info {
+	u8 channel;
+	u8 flags;
+	s8 txpower;
+	s8 max_txpower;
+};
+struct daemon_regulatory_info {
+	u16 count;		/* Number of channels provided */
+	struct daemon_channel_info channel_info[0];
+} __attribute__ ((packed));
+
+/* driver <- daemon information request */
+struct daemon_request_info {
+	u8 request;
+} __attribute__ ((packed));
+
+/* driver <- daemon set state */
+struct daemon_set_state {
+	u8 state;
+} __attribute__ ((packed));
+
+/* driver -> daemon scan request */
+#define DAEMON_MIN_24GHZ_CHANNEL 1
+#define DAEMON_MAX_24GHZ_CHANNEL 14
+#define DAEMON_MIN_52GHZ_CHANNEL 34
+#define DAEMON_MAX_52GHZ_CHANNEL 165
+
+#define DAEMON_SCAN_FLAG_24GHZ  (1<<0)
+#define DAEMON_SCAN_FLAG_52GHZ  (1<<1)
+#define DAEMON_SCAN_FLAG_ACTIVE (1<<2)
+#define DAEMON_SCAN_FLAG_DIRECT (1<<3)
+
+#define DAEMON_MAX_CMD_SIZE 1024
+
+enum {
+	DAEMON_TXRATE_1 = 0xa,
+	DAEMON_TXRATE_2 = 0x14,
+	DAEMON_TXRATE_5_5 = 0x37,
+	DAEMON_TXRATE_6 = 0xd,
+	DAEMON_TXRATE_9 = 0xf,
+	DAEMON_TXRATE_11 = 0x6e,
+	DAEMON_TXRATE_12 = 0x5,
+	DAEMON_TXRATE_18 = 0x7,
+	DAEMON_TXRATE_24 = 0x9,
+	DAEMON_TXRATE_36 = 0xb,
+	DAEMON_TXRATE_48 = 0x1,
+	DAEMON_TXRATE_54 = 0x3,
+};
+
+struct daemon_scan_channel {
+	u8 channel;
+	u8 request_active;
+	u16 active_dwell;
+	u16 passive_dwell;
+} __attribute__ ((packed));
+
+struct daemon_ssid_ie {
+	u8 id;
+	u8 len;
+	u8 ssid[32];
+} __attribute__ ((packed));
+
+struct daemon_rx_config {
+	u8 dev_type;
+	u16 channel;
+	u32 flags;
+	u32 filter_flags;
+	u8 ofdm_basic_rates;
+	u8 cck_basic_rates;
+	u8 node_addr[6];
+	u8 bssid_addr[6];
+	u16 assoc_id;
+	u16 beacon_interval;
+} __attribute__ ((packed));
+
+#define DAEMON_MAX_SCAN_SIZE 1024
+struct daemon_scan_request {
+	u8 flags;		/* 0 - 2.4Ghz, 1 - 5.2Ghz */
+	u8 channel_count;
+	u16 probe_request_len;
+	u16 quiet_time;		/* dwell only this long on quiet chnl (active scan) */
+	u16 quiet_plcp_th;	/* quiet chnl is < this # pkts (typ. 1) */
+	u32 suspend_time;	/* pause scan this long when returning to svc chnl */
+	u32 max_out_time;	/* max msec to be out of associated (service) chnl */
+	u8 probe_request_rate;	/* rate to send probe request */
+	u32 filter_flags;
+	u32 rxon_flags;
+	struct daemon_ssid_ie direct_scan;
+	u8 data[0];
+	/*
+	   The channels start after the probe request payload and are of type:
+
+	   struct daemon_scan_channel channels[0];
+
+	   NOTE:  Only one band of channels can be scanned per pass.  You
+	   can not mix 2.4Ghz channels and 5.2Ghz channels and must
+	   request a scan multiple times (not concurrently)
+
+	 */
+} __attribute__ ((packed));
+
+/* driver -> daemon 11h frame */
+struct daemon_80211_frame {
+	u8 channel;
+	u8 reserved1;
+	u16 rssi;
+	u16 reserved2;
+	u64 tsf;
+	u32 beacon_time;
+	u16 frame_len;
+	u8 frame[0];
+} __attribute__ ((packed));
+
+struct daemon_sync_txpower_limit {
+	u8 channel;
+	s8 power;
+} __attribute__ ((packed));
+
+enum {
+	DAEMON_SYNC_UNINIT = 0,
+	DAEMON_SYNC_INIT,
+	DAEMON_SYNC_SCAN_COMPLETE,
+	DAEMON_SYNC_TXPOWER_LIMIT,
+	DAEMON_SYNC_MEASURE_REPORT,
+	DAEMON_SYNC_TX_STATUS,
+	DAEMON_SYNC_SUSPEND,
+	DAEMON_SYNC_RESUME,
+};
+
+/* driver  -> daemon */
+struct daemon_sync_cmd {
+	u16 state;
+	u16 len;
+	u8 data[0];
+} __attribute__ ((packed));
+
+#endif


Index: kernel-2.6.spec
===================================================================
RCS file: /cvs/dist/rpms/kernel/devel/kernel-2.6.spec,v
retrieving revision 1.2307
retrieving revision 1.2307.2.1
diff -u -r1.2307 -r1.2307.2.1
--- kernel-2.6.spec	23 Jun 2006 17:59:47 -0000	1.2307
+++ kernel-2.6.spec	26 Jun 2006 15:27:29 -0000	1.2307.2.1
@@ -28,7 +28,7 @@
 %define sublevel 17
 %define kversion 2.6.%{sublevel}
 %define rpmversion 2.6.%{sublevel}
-%define tag FC6
+%define tag FC6.jwltest.1
 %if %{rhelbuild}
 %define tag EL
 %endif
@@ -182,7 +182,8 @@
 License: GPLv2
 Version: %{rpmversion}
 Release: %{release}
-ExclusiveArch: noarch %{all_x86} x86_64 ppc ppc64 ia64 sparc sparc64 s390 s390x
+#ExclusiveArch: noarch %{all_x86} x86_64 ppc ppc64 ia64 sparc sparc64 s390 s390x
+ExclusiveArch: noarch %{all_x86} x86_64 ppc ppc64 ia64
 ExclusiveOS: Linux
 Provides: kernel = %{version}
 Provides: kernel-drm = 4.3.0
@@ -358,7 +359,8 @@
 Patch1203: linux-2.6-NFSD-badness.patch
 
 # NIC driver updates
-Patch1304: linux-2.6-net-ipw2200-monitor.patch
+Patch1300: linux-2.6-net-ipw2200-monitor.patch
+Patch1301: jwltest-ipw3945-1_0_5.patch
 
 # Squashfs
 Patch1400: linux-2.6-squashfs.patch
@@ -931,7 +933,9 @@
 
 # NIC driver fixes.
 # add IPW2200_MONITOR config option
-%patch1304 -p1
+%patch1300 -p1
+# add IPW3945 driver
+%patch1301 -p1
 
 # Squashfs
 %patch1400 -p1


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]