rpms/kernel-xen-2.6/devel git-geode.patch, NONE, 1.1 kernel-xen.spec, 1.13, 1.14
fedora-cvs-commits at redhat.com
fedora-cvs-commits at redhat.com
Thu Mar 22 16:09:56 UTC 2007
Author: quintela
Update of /cvs/dist/rpms/kernel-xen-2.6/devel
In directory cvs.devel.redhat.com:/tmp/cvs-serv31105
Modified Files:
kernel-xen.spec
Added Files:
git-geode.patch
Log Message:
- Add missing git-geode.patch.
git-geode.patch:
arch/i386/Kconfig | 9 +++
arch/i386/boot/setup.S | 5 +
drivers/video/Kconfig | 6 +-
drivers/video/console/Kconfig | 4 -
drivers/video/geode/Kconfig | 20 +++++++
drivers/video/geode/display_gx.c | 22 ++++++--
drivers/video/geode/display_gx.h | 7 ++
drivers/video/geode/gxfb_core.c | 57 ++++++++++++++++++--
drivers/video/geode/video_gx.c | 107 ++++++++++++++++++++++++++++++++++-----
drivers/video/geode/video_gx.h | 25 +++++++++
include/linux/pci_ids.h | 5 -
11 files changed, 237 insertions(+), 30 deletions(-)
--- NEW FILE git-geode.patch ---
This patch aggregates changesets from Jordan Crouse's AMD Geode GIT tree.
It contains the necessary changes to support the framebuffer driver (gxfb) on
OLPC's boards without VGA support.
http://git.infradead.org/?p=users/jcrouse/geode.git;a=summary
arch/i386/Kconfig | 9 +++
arch/i386/boot/setup.S | 5 +
drivers/video/Kconfig | 6 +-
drivers/video/console/Kconfig | 4 -
drivers/video/geode/Kconfig | 20 +++++++
drivers/video/geode/display_gx.c | 22 ++++++--
drivers/video/geode/display_gx.h | 7 ++
drivers/video/geode/gxfb_core.c | 57 ++++++++++++++++++--
drivers/video/geode/video_gx.c | 107 ++++++++++++++++++++++++++++++++++----- drivers/video/geode/video_gx.h | 25 +++++++++
include/linux/pci_ids.h | 5 -
11 files changed, 237 insertions(+), 30 deletions(-)
diff -Nur linux-2.6-linus/arch/i386/boot/setup.S linux-2.6-geode/arch/i386/boot/setup.S
--- linux-2.6-linus/arch/i386/boot/setup.S 2006-07-23 21:03:05.000000000 +0100
+++ linux-2.6-geode/arch/i386/boot/setup.S 2006-08-08 16:48:27.000000000 +0100
@@ -394,10 +394,13 @@
xorw %bx, %bx
int $0x16
+#ifndef CONFIG_VGA_NOPROBE
+
# Check for video adapter and its parameters and allow the
# user to browse video modes.
call video # NOTE: we need %ds pointing
# to bootsector
+#endif
# Get hd0 data...
xorw %ax, %ax
@@ -1006,9 +1009,11 @@
.word gdt_end - gdt - 1 # gdt limit
.word 0, 0 # gdt base (filled in later)
+#ifndef CONFIG_VGA_NOPROBE
# Include video setup & detection code
#include "video.S"
+#endif
# Setup signature -- must be last
setup_sig1: .word SIG1
diff -Nur linux-2.6-linus/arch/i386/Kconfig linux-2.6-geode/arch/i386/Kconfig
--- linux-2.6-linus/arch/i386/Kconfig 2006-07-23 21:03:05.000000000 +0100
+++ linux-2.6-geode/arch/i386/Kconfig 2006-08-08 16:48:27.000000000 +0100
@@ -735,6 +735,15 @@
If unsure, say Y. Only embedded should say N here.
+config VGA_NOPROBE
+ bool "Don't probe VGA at boot" if EMBEDDED
+ default n
+ help
+ Saying Y here will cause the kernel to not probe VGA at boot time.
+ This will break everything that depends on the probed screen
+ data. Say N here unless you are absolutely sure this is what you
+ want.
+
source kernel/Kconfig.hz
config KEXEC
diff -Nur linux-2.6-linus/drivers/video/console/Kconfig linux-2.6-geode/drivers/video/console/Kconfig
--- linux-2.6-linus/drivers/video/console/Kconfig 2006-07-23 21:03:05.000000000 +0100
+++ linux-2.6-geode/drivers/video/console/Kconfig 2006-08-08 16:48:27.000000000 +0100
@@ -5,8 +5,8 @@
menu "Console display driver support"
config VGA_CONSOLE
- bool "VGA text console" if EMBEDDED || !X86
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE
+ bool "VGA text console" if (EMBEDDED || !X86)
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !VGA_NOPROBE
default y
help
Saying Y here will allow you to use Linux in text mode through a
diff -Nur linux-2.6-linus/drivers/video/geode/display_gx.c linux-2.6-geode/drivers/video/geode/display_gx.c
--- linux-2.6-linus/drivers/video/geode/display_gx.c 2006-07-23 21:03:05.000000000 +0100
+++ linux-2.6-geode/drivers/video/geode/display_gx.c 2006-08-08 16:48:27.000000000 +0100
@@ -21,11 +21,26 @@
#include "geodefb.h"
#include "display_gx.h"
-int gx_frame_buffer_size(void)
+#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE
+unsigned int gx_frame_buffer_size(void) {
+ return CONFIG_FB_GEODE_GX_FBSIZE;
+}
+#else
+unsigned int gx_frame_buffer_size(void)
{
- /* Assuming 16 MiB. */
- return 16*1024*1024;
+ unsigned int val;
+
+ /* FB size is reported by a virtual register */
+ /* Virtual register class = 0x02 */
+ /* VG_MEM_SIZE(512Kb units) = 0x00 */
+
+ outw(0xFC53, 0xAC1C);
+ outw(0x0200, 0xAC1C);
+
+ val = (unsigned int)(inw(0xAC1E)) & 0xFFl;
+ return (val << 19);
}
+#endif
int gx_line_delta(int xres, int bpp)
{
@@ -81,6 +96,7 @@
writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
par->dc_regs + DC_LINE_SIZE);
+
/* Enable graphics and video data and unmask address lines. */
dcfg |= DC_DCFG_GDEN | DC_DCFG_VDEN | DC_DCFG_A20M | DC_DCFG_A18M;
diff -Nur linux-2.6-linus/drivers/video/geode/display_gx.h linux-2.6-geode/drivers/video/geode/display_gx.h
--- linux-2.6-linus/drivers/video/geode/display_gx.h 2006-07-23 21:03:05.000000000 +0100
+++ linux-2.6-geode/drivers/video/geode/display_gx.h 2006-08-08 16:48:27.000000000 +0100
@@ -11,11 +11,15 @@
#ifndef __DISPLAY_GX_H__
#define __DISPLAY_GX_H__
-int gx_frame_buffer_size(void);
+unsigned int gx_frame_buffer_size(void);
int gx_line_delta(int xres, int bpp);
extern struct geode_dc_ops gx_dc_ops;
+/* MSR that tells us if a TFT or CRT is attached */
+#define GLD_MSR_CONFIG 0xC0002001
+#define GLD_MSR_CONFIG_DM_FP 0x40
+
/* Display controller registers */
#define DC_UNLOCK 0x00
@@ -93,4 +97,5 @@
#define DC_PAL_ADDRESS 0x70
#define DC_PAL_DATA 0x74
+#define DC_GLIU0_MEM_OFFSET 0x84
#endif /* !__DISPLAY_GX1_H__ */
diff -Nur linux-2.6-linus/drivers/video/geode/gxfb_core.c linux-2.6-geode/drivers/video/geode/gxfb_core.c
--- linux-2.6-linus/drivers/video/geode/gxfb_core.c 2006-07-23 21:03:05.000000000 +0100
+++ linux-2.6-geode/drivers/video/geode/gxfb_core.c 2006-08-08 16:48:27.000000000 +0100
@@ -35,10 +35,10 @@
#include "display_gx.h"
#include "video_gx.h"
-static char mode_option[32] = "640x480-16 at 60";
+static char *mode_option;
/* Modes relevant to the GX (taken from modedb.c) */
-static const struct fb_videomode __initdata gx_modedb[] = {
+static const struct fb_videomode gx_modedb[] __initdata = {
/* 640x480-60 VESA */
{ NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2,
0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
@@ -103,6 +103,9 @@
{ NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ { "OLPC-1", 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, 0 }
};
static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -240,6 +243,12 @@
if (!info->screen_base)
return -ENOMEM;
+ /* Set the 16MB aligned base address of the graphics memory region
+ * in the display controller */
+
+ writel(info->fix.smem_start & 0xFF000000,
+ par->dc_regs + DC_GLIU0_MEM_OFFSET);
+
dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n",
info->fix.smem_len / 1024, info->fix.smem_start);
@@ -302,6 +311,7 @@
struct geodefb_par *par;
struct fb_info *info;
int ret;
+ unsigned long val;
info = gxfb_init_fbinfo(&pdev->dev);
if (!info)
@@ -317,6 +327,15 @@
goto err;
}
+ /* Figure out if this is a TFT or CRT part */
+
+ rdmsrl(GLD_MSR_CONFIG, val);
+
+ if ((val & GLD_MSR_CONFIG_DM_FP) == GLD_MSR_CONFIG_DM_FP)
+ par->enable_crt = 0;
+ else
+ par->enable_crt = 1;
+
ret = fb_find_mode(&info->var, info, mode_option,
gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16);
if (ret == 0 || ret == 4) {
@@ -325,7 +344,8 @@
goto err;
}
- /* Clear the frame buffer of garbage. */
+
+ /* Clear the frame buffer of garbage. */
memset_io(info->screen_base, 0, info->fix.smem_len);
gxfb_check_var(&info->var, info);
@@ -380,7 +400,7 @@
}
static struct pci_device_id gxfb_id_table[] = {
- { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_VIDEO,
+ { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO,
PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
0xff0000, 0 },
{ 0, }
@@ -395,11 +415,34 @@
.remove = gxfb_remove,
};
+#ifndef MODULE
+static int __init gxfb_setup(char *options) {
+
+ char *opt;
+
+ if (!options || !*options)
+ return 0;
+
+ while((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+
+ mode_option = opt;
+ }
+
+ return 0;
+}
+#endif
+
static int __init gxfb_init(void)
{
#ifndef MODULE
- if (fb_get_options("gxfb", NULL))
+ char *option = NULL;
+
+ if (fb_get_options("gxfb", &option))
return -ENODEV;
+
+ gxfb_setup(option);
#endif
return pci_register_driver(&gxfb_driver);
}
@@ -412,8 +455,8 @@
module_init(gxfb_init);
module_exit(gxfb_cleanup);
-module_param_string(mode, mode_option, sizeof(mode_option), 0444);
-MODULE_PARM_DESC(mode, "video mode (<x>x<y>[-<bpp>][@<refr>])");
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "video mode (<x>x<y>[-<bpp>][@<refr>])");
MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX");
MODULE_LICENSE("GPL");
diff -Nur linux-2.6-linus/drivers/video/geode/Kconfig linux-2.6-geode/drivers/video/geode/Kconfig
--- linux-2.6-linus/drivers/video/geode/Kconfig 2006-07-23 21:03:05.000000000 +0100
+++ linux-2.6-geode/drivers/video/geode/Kconfig 2006-08-08 16:48:27.000000000 +0100
@@ -23,6 +23,26 @@
If unsure, say N.
+config FB_GEODE_GX_SET_FBSIZE
+ bool "Manually specify the Geode GX framebuffer size"
+ depends on FB_GEODE_GX
+ default n
+ ---help---
+ If you want to manually specify the size of your GX framebuffer,
+ say Y here, otherwise say N to dynamically probe it.
+
+ Say N unless you know what you are doing.
+
+config FB_GEODE_GX_FBSIZE
+ hex "Size of the GX framebuffer, in bytes"
+ depends on FB_GEODE_GX_SET_FBSIZE
+ default "0x1600000"
+ ---help---
+ Specify the size of the GX framebuffer. Normally, you will
+ want this to be MB aligned. Common values are 0x80000 (8MB)
+ and 0x1600000 (16MB). Don't change this unless you know what
+ you are doing
+
config FB_GEODE_GX1
tristate "AMD Geode GX1 framebuffer support (EXPERIMENTAL)"
depends on FB && FB_GEODE && EXPERIMENTAL
diff -Nur linux-2.6-linus/drivers/video/geode/video_gx.c linux-2.6-geode/drivers/video/geode/video_gx.c
--- linux-2.6-linus/drivers/video/geode/video_gx.c 2006-07-23 21:03:05.000000000 +0100
+++ linux-2.6-geode/drivers/video/geode/video_gx.c 2006-08-08 16:48:27.000000000 +0100
@@ -175,13 +175,88 @@
} while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
}
+static void
+gx_configure_tft(struct fb_info *info) {
+
+ struct geodefb_par *par = info->par;
+ unsigned long val;
+ unsigned long fp;
+
+ /* Set up the DF pad select MSR */
+
+ rdmsrl(GX_VP_MSR_PAD_SELECT, val);
+ val &= ~GX_VP_PAD_SELECT_MASK;
+ val |= GX_VP_PAD_SELECT_TFT;
+ wrmsrl(GX_VP_MSR_PAD_SELECT, val);
+
+ /* Turn off the panel */
+
+ fp = readl(par->vid_regs + GX_FP_PM);
+ fp &= ~GX_FP_PM_P;
+ writel(fp, par->vid_regs + GX_FP_PM);
+
+ /* Set timing 1 */
+
+ fp = readl(par->vid_regs + GX_FP_PT1);
+ fp &= GX_FP_PT1_VSIZE_MASK;
+ fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
+ writel(fp, par->vid_regs + GX_FP_PT1);
+
+ /* Timing 2 */
+ /* Set bits that are always on for TFT */
+
+ fp = 0x0F100000;
+
+ /* Add sync polarity */
+
+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+ fp |= GX_FP_PT2_VSP;
+
+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+ fp |= GX_FP_PT2_HSP;
+
+ writel(fp, par->vid_regs + GX_FP_PT2);
+
+ /* Set the dither control */
+ writel(0x70, par->vid_regs + GX_FP_DFC);
+
+ /* Enable the FP data and power (in case the BIOS didn't) */
+
+ fp = readl(par->vid_regs + GX_DCFG);
+ fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
+ writel(fp, par->vid_regs + GX_DCFG);
+
+ /* Unblank the panel */
+
+ fp = readl(par->vid_regs + GX_FP_PM);
+ fp |= GX_FP_PM_P;
+ writel(fp, par->vid_regs + GX_FP_PM);
+}
+
static void gx_configure_display(struct fb_info *info)
{
struct geodefb_par *par = info->par;
- u32 dcfg, fp_pm;
+ u32 dcfg, misc;
+
+ /* Set up the MISC register */
+
+ misc = readl(par->vid_regs + GX_MISC);
+
+ /* Power up the DAC */
+ misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
+
+ /* Disable gamma correction */
+ misc |= GX_MISC_GAM_EN;
+
+ writel(misc, par->vid_regs + GX_MISC);
+ /* Write the display configuration */
dcfg = readl(par->vid_regs + GX_DCFG);
+ /* Disable hsync and vsync */
+ dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
+ writel(dcfg, par->vid_regs + GX_DCFG);
+
/* Clear bits from existing mode. */
dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
| GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL
@@ -199,12 +274,19 @@
if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
dcfg |= GX_DCFG_CRT_VSYNC_POL;
+ /* Enable the display logic */
+ /* Set up the DACS to blank normally */
+
+ dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
+
+ /* Enable the external DAC VREF? */
+
writel(dcfg, par->vid_regs + GX_DCFG);
- /* Power on flat panel. */
- fp_pm = readl(par->vid_regs + GX_FP_PM);
- fp_pm |= GX_FP_PM_P;
- writel(fp_pm, par->vid_regs + GX_FP_PM);
+ /* Set up the flat panel (if it is enabled) */
+
+ if (par->enable_crt == 0)
+ gx_configure_tft(info);
}
static int gx_blank_display(struct fb_info *info, int blank_mode)
@@ -245,12 +327,15 @@
writel(dcfg, par->vid_regs + GX_DCFG);
/* Power on/off flat panel. */
- fp_pm = readl(par->vid_regs + GX_FP_PM);
- if (blank_mode == FB_BLANK_POWERDOWN)
- fp_pm &= ~GX_FP_PM_P;
- else
- fp_pm |= GX_FP_PM_P;
- writel(fp_pm, par->vid_regs + GX_FP_PM);
+
+ if (par->enable_crt == 0) {
+ fp_pm = readl(par->vid_regs + GX_FP_PM);
+ if (blank_mode == FB_BLANK_POWERDOWN)
+ fp_pm &= ~GX_FP_PM_P;
+ else
+ fp_pm |= GX_FP_PM_P;
+ writel(fp_pm, par->vid_regs + GX_FP_PM);
+ }
return 0;
}
diff -Nur linux-2.6-linus/drivers/video/geode/video_gx.h linux-2.6-geode/drivers/video/geode/video_gx.h
--- linux-2.6-linus/drivers/video/geode/video_gx.h 2006-07-23 21:03:05.000000000 +0100
+++ linux-2.6-geode/drivers/video/geode/video_gx.h 2006-08-08 16:48:27.000000000 +0100
@@ -13,6 +13,11 @@
extern struct geode_vid_ops gx_vid_ops;
+/* GX Flatpanel control MSR */
+#define GX_VP_MSR_PAD_SELECT 0xC0002011
+#define GX_VP_PAD_SELECT_MASK 0x3FFFFFFF
+#define GX_VP_PAD_SELECT_TFT 0x1FFFFFFF
+
/* Geode GX video processor registers */
#define GX_DCFG 0x0008
@@ -20,6 +25,8 @@
# define GX_DCFG_HSYNC_EN 0x00000002
# define GX_DCFG_VSYNC_EN 0x00000004
# define GX_DCFG_DAC_BL_EN 0x00000008
+# define GX_DCFG_FP_PWR_EN 0x00000040
+# define GX_DCFG_FP_DATA_EN 0x00000080
# define GX_DCFG_CRT_HSYNC_POL 0x00000100
# define GX_DCFG_CRT_VSYNC_POL 0x00000200
# define GX_DCFG_CRT_SYNC_SKW_MASK 0x0001C000
@@ -28,10 +35,28 @@
# define GX_DCFG_GV_GAM 0x00200000
# define GX_DCFG_DAC_VREF 0x04000000
+/* Geode GX MISC video configuration */
+
+#define GX_MISC 0x50
+#define GX_MISC_GAM_EN 0x00000001
+#define GX_MISC_DAC_PWRDN 0x00000400
+#define GX_MISC_A_PWRDN 0x00000800
+
/* Geode GX flat panel display control registers */
+
+#define GX_FP_PT1 0x0400
+#define GX_FP_PT1_VSIZE_MASK 0x7FF0000
+#define GX_FP_PT1_VSIZE_SHIFT 16
+
+#define GX_FP_PT2 0x408
+#define GX_FP_PT2_VSP (1 << 23)
+#define GX_FP_PT2_HSP (1 << 22)
+
#define GX_FP_PM 0x410
# define GX_FP_PM_P 0x01000000
+#define GX_FP_DFC 0x418
+
/* Geode GX clock control MSRs */
#define MSR_GLCP_SYS_RSTPLL 0x4c000014
diff -Nur linux-2.6-linus/drivers/video/Kconfig linux-2.6-geode/drivers/video/Kconfig
--- linux-2.6-linus/drivers/video/Kconfig 2006-07-23 21:03:05.000000000 +0100
+++ linux-2.6-geode/drivers/video/Kconfig 2006-08-08 16:48:27.000000000 +0100
@@ -540,7 +540,7 @@
config FB_VESA
bool "VESA VGA graphics support"
- depends on (FB = y) && X86
+ depends on (FB = y) && X86 && !VGA_NOPROBE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -828,7 +828,7 @@
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86
+ depends on FB && EXPERIMENTAL && PCI && X86 && !VGA_NOPROBE
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
@@ -1166,7 +1166,7 @@
config FB_SIS
tristate "SiS/XGI display support"
- depends on FB && PCI
+ depends on FB && PCI && !VGA_NOPROBE
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff -Nur linux-2.6-linus/include/linux/pci_ids.h linux-2.6-geode/include/linux/pci_ids.h
--- linux-2.6-linus/include/linux/pci_ids.h 2006-07-23 21:03:05.000000000 +0100
+++ linux-2.6-geode/include/linux/pci_ids.h 2006-08-08 16:48:27.000000000 +0100
@@ -390,7 +390,7 @@
#define PCI_DEVICE_ID_NS_CS5535_IDE 0x002d
#define PCI_DEVICE_ID_NS_CS5535_AUDIO 0x002e
#define PCI_DEVICE_ID_NS_CS5535_USB 0x002f
-#define PCI_DEVICE_ID_NS_CS5535_VIDEO 0x0030
+#define PCI_DEVICE_ID_NS_GX_VIDEO 0x0030
#define PCI_DEVICE_ID_NS_SATURN 0x0035
#define PCI_DEVICE_ID_NS_SCx200_BRIDGE 0x0500
#define PCI_DEVICE_ID_NS_SCx200_SMI 0x0501
@@ -403,8 +403,7 @@
#define PCI_DEVICE_ID_NS_SC1100_XBUS 0x0515
#define PCI_DEVICE_ID_NS_87410 0xd001
-#define PCI_DEVICE_ID_NS_CS5535_HOST_BRIDGE 0x0028
-#define PCI_DEVICE_ID_NS_CS5535_ISA_BRIDGE 0x002b
+#define PCI_DEVICE_ID_NS_GX_HOST_BRIDGE 0x0028
#define PCI_VENDOR_ID_TSENG 0x100c
#define PCI_DEVICE_ID_TSENG_W32P_2 0x3202
Index: kernel-xen.spec
===================================================================
RCS file: /cvs/dist/rpms/kernel-xen-2.6/devel/kernel-xen.spec,v
retrieving revision 1.13
retrieving revision 1.14
diff -u -r1.13 -r1.14
--- kernel-xen.spec 22 Mar 2007 16:08:27 -0000 1.13
+++ kernel-xen.spec 22 Mar 2007 16:09:54 -0000 1.14
@@ -1986,7 +1986,7 @@
%changelog
* Thu Mar 22 2007 Juan Quintela <quintela at redhat.com>
-- More brew magic.
+- Add missing git-geode.patch.
- Re-enable Xen and update to 2.6.20-3.0.4 version.
- Update to 2.6.20.3.
More information about the fedora-cvs-commits
mailing list