[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: s390 ctc0 interface not coming up



Hi,


On Thu, Jul 22, 2004 at 06:52:07PM +0200, Matthias Saou wrote:
> Hi,
> 
> Here's the content of my ifcfg-ctc0 file, it's the post-install default and
> seems correct to me :
> 
> # IBM CTC
> DEVICE=ctc0
> BOOTPROTO=static
> BROADCAST=192.168.200.3
> IPADDR=192.168.200.3
> MTU=1500
> NETMASK=255.255.255.255
> NETWORK=192.168.200.3
> ONBOOT=yes
> QETH=yes
> REMIP=192.168.200.4
> SUBCHANNELS=0.0.0600,0.0.0601
> TYPE=QETH
> 

One should not do replying when

a) in hurry
b) knowing that you should have been bed hours ago
c) tired (b)


For all the other information (which are valid) i wrote about thise
before, it seems just that 

QETH=yes
TYPE=QETH

Are not valid for this setup. The magic in network-functions get all
wrong when CTC is defined as QETH, so it more like should be

TYPE=CTC

and nuke that 'QETH=yes' line alltogether.


As i said, i had valis Tao/s390x setup already when i updated it to
FC3/rawhide, so i had all this information on my ifcfg-ctc0 except the
SUBCHANNELS-line which i had to dig out for 2.6-series.

Actually i remember testing just 2.6-kernel over Tao/s390x before i
started to 'follow the future'.

I should have spotted this little detail immetiatedly, but i didn't,
so sorry about that .....



-- 
Pasi Pirhonen - upi iki fi - http://iki.fi/upi/



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]