TV Tuner problem

[Kyrre Ness Sjobak]

tor, 17.03.2005 kl. 10.56 skrev Eric Tanguy:
> > ons, 16.03.2005 kl. 15.31 skrev Eric Tanguy:
> >> > Le mardi 15 mars 2005 à 06:38 -0500, Bob Chiodini a écrit :
> >> >> On Mon, 2005-03-14 at 23:50 +0100, Eric Tanguy wrote:
> >> >> > i tried a lot of thing to solve my problem and maybe it could be a
> >> >> > module problem :
> >> >> > modprobing bttv seems to give good results and all is autodetected
> >> >> (the
> >> >> > tuner seems to be the right one) :
> >> >> > bttv: driver version 0.9.15 loaded
> >> >> > bttv: using 8 buffers with 2080k (520 pages) each for capture
> >> >> > bttv: Bt8xx card found (0).
> >> >> > ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 11 (level, low) -> IRQ
> >> 11
> >> >> > bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 11, latency: 64, mmio:
> >> >> > 0xeb800000
> >> >> > bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is
> >> >> 11bd:0012
> >> >> > bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
> >> >> > bttv0: gpio: en=00000000, out=00000000 in=00fff3ff [init]
> >> >> > bttv0: i2c: checking for MSP34xx @ 0x80... not found
> >> >> > bttv0: pinnacle/mt: id=4 info="PAL+SECAM / mono" radio=no
> >> >> > bttv0: using tuner=33
> >> >> > bttv0: i2c: checking for MSP34xx @ 0x80... not found
> >> >> > bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> >> >> > bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> >> >> > tda9885/6/7: chip found @ 0x96
> >> >> > tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
> >> >> > tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw]
> >> >> > tuner: microtune: companycode=3cbf part=42 rev=2f
> >> >> > tuner: microtune MT2050 found, OK
> >> >> > bttv0: registered device video0
> >> >> > bttv0: registered device vbi0
> >> >> > bttv0: PLL: 28636363 => 35468950 . ok
> >> >> >
> >> >> > The problem is i receive no signal in tvtime whereas this card
> >> works
> >> >> > fine under windows. It seems the system cannot set the right tuner
> >> >> > frequency :
> >> >> >
> >> >> > mt2050_set_if_freq failed with -121
> >> >> >
> >> >> > Someone could help me ?
> >> >>
> >> >> Eric,
> >> >>
> >> >> Take a look at this thread.
> >> >>
> >> >> http://groups-beta.google.com/group/linux.kernel/browse_thread/thread/58bd50364a5b47d8/81b8dfdd7bed9d95?q=linux+Pinnacle+PCTV+rave+tuner#81b8dfdd7bed9d95
> >> >>
> >> >> It looks like there is a patch.  Also, one of the posters said it
> >> worked
> >> >> in 2.6.9.  Do you have a 2.6.9 version of the kernel still around?
> >> >>
> >> >> BTW:  I don't see why your question was off-topic on the "other
> >> list".
> >> >>
> >> >> Bob...
> >> >>
> >> > Yes you are right. I try the old 2.6.9-1.667 kernel instead of the
> >> > actual 2.6.10-1.770_FC3 one and my tv tuner works fine.
> >> > So it would be a kernel module problem and if i can't ask this kind of
> >> > questions on the devel list i don't where i can ...
> >> > Thanks
> >> > Eric
> >> >
> >> >
> >> No answer ? What can i do ??
> >> Eric
> >
> > Bugzilla it?
> >
> >
> 
> Yes but where because i'm a newbie : kernel ? FC3 ? bttv ? ...
> Maybe the problem is solved in 2.6.11 kernel ? Is it safe to try the
> 2.6.11 FC4 kernel from the devel tree on FC3 ?
> Thanks
> 
> Eric
> 
> 

I don't know if the bttv driver works or not - my bttv card is lying in
its box, and i am not going to dig out my computer from all the stuff it
is buryed beneath in order to test.

Go to bugzilla, select product fedora -> fedora 3, component kernel, and
enter the output of "uname -a" (or better - the correct rpm from "rpm
-qa | grep kernel" - it probably a few will show up. Select the buggy
one.

Type what is wrong, how you reproduce it, etc. It's really easy.

Kyrre