[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Request for testers: Video hardware autodetection



Mike A. Harris wrote:

If you have a video card which is assigned the "vesa" driver
from the above test, then it is either not supported by the
drivers, or we're missing a PCI ID to driver mapping for that
card/chip.

I have a Sapphire ATI X550 card, it has never been properly detected by xorg, it picks vesa driver, but qll works great if I add a "ChipId 0x5b62" and set the driver to radeon in the device section.

I did tag this onto a fd.o/xorg bugzilla that was requesting missing radeon PCIDs around the X11R7RC timeframe

https://bugs.freedesktop.org/show_bug.cgi?id=4284#c3

Would be nice if it gets added

Just a very quick by the by .... I'm not expecting h/w openGL (without the fglrx drivers) but with ati/radeon drivers should I be getting Mesa as a software fallback, as I'm not ...

snippet from lspci

01:00.0 VGA compatible controller: ATI Technologies Inc RV370 [ATI Sapphire X550 Silent]

01:00.1 Display controller: ATI Technologies Inc RV370 secondary [ATI Sapphire X550 Silent]

snippet from lspci -nvv

01:00.0 0300: 1002:5b63
        Subsystem: 174b:1490
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size 10
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 40000000 (32-bit, prefetchable) [size=256M]
        Region 1: I/O ports at 2000 [size=256]
        Region 2: Memory at 50110000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at 50120000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
                Device: Latency L0s <256ns, L1 <4us
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
                Link: Latency L0s <256ns, L1 <2us
                Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x16
Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [100] Advanced Error Reporting

01:00.1 0380: 1002:5b73
        Subsystem: 174b:1491
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size 10
Region 0: Memory at 50100000 (32-bit, non-prefetchable) [disabled] [size=64K]
        Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <256ns, L1 <4us
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
                Link: Latency L0s <256ns, L1 <2us
                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x16




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]