[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

2.6.23-0.104.rc3.fc8 boot time messages



Title: Signature
I have been trying out the latest FC8 kernel from the development tree and when booting I get some messages related to our network interfaces. It lookslike the latest kernel has a "bug" in the bonding code. Although these messages appear the machine seems to be functioning fine... Boot log attached.

--

Howard Wilkinson

Phone:

+44(20)76907075

Coherent Technology Limited

Fax:

 

23 Northampton Square,

Mobile:

+44(7980)639379

United Kingdom, EC1V 0HL

Email:

howard cohtech com

 

Linux version 2.6.23-0.104.rc3.fc8 (kojibuilder hammer2 fedora redhat com) (gcc version 4.1.2 20070723 (Red Hat 4.1.2-17)) #1 SMP Mon Aug 13 17:03:04 EDT 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000fbfd0000 (usable)
 BIOS-e820: 00000000fbfd0000 - 00000000fbfff000 (ACPI data)
 BIOS-e820: 00000000fbfff000 - 00000000fc000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
3135MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 1032144) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->  1032144
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->  1032144
On node 0 totalpages: 1032144
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4040 pages, LIFO batch:0
  Normal zone: 3080 pages used for memmap
  Normal zone: 222200 pages, LIFO batch:31
  HighMem zone: 10975 pages used for memmap
  HighMem zone: 791793 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000FF980, 0014 (r0 AMI   )
ACPI: RSDT FBFF0000, 002C (r1 RCC    RCCNILE         1 MSFT  1000000)
ACPI: FACP FBFF0030, 0074 (r1 RCC    RCCNILE         1 MSFT  1000000)
ACPI: DSDT FBFF0120, 5564 (r1    RCC  CNB30LE      100 MSFT  100000B)
ACPI: FACS FBFFF000, 0040
ACPI: APIC FBFF00B0, 006A (r1 RCC    RCCNILE         1 MSFT  1000000)
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:8 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: INTEL    Product ID: CNB30LE      APIC at: 0xFEE00000
I/O APIC #4 Version 17 at 0xFEC00000.
I/O APIC #5 Version 17 at 0xFEC01000.
Enabling APIC mode:  Flat.  Using 2 I/O APICs
Processors: 2
Allocating PCI resources starting at fc400000 (gap: fc000000:02c00000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order.  Total pages: 1018033
Kernel command line: ro root=/dev/VolGroup00/root console=ttyS0,19200   audit=0 pci=noacpi clocksource=acpi_pm
audit: disabled (after initialization)
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
mapped IOAPIC to ffff9000 (fec01000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c080b000 soft=c07eb000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1097.243 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:    8
... MAX_LOCK_DEPTH:          30
... MAX_LOCKDEP_KEYS:        2048
... CLASSHASH_SIZE:           1024
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192
 memory used by lock dependency info: 1024 kB
 per task-struct memory footprint: 1680 bytes
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4058552k/4128576k available (2250k kernel code, 68760k reserved, 1160k data, 568k init, 3211072k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc075a000 - 0xc07e8000   ( 568 kB)
      .data : 0xc063282e - 0xc0754a44   (1160 kB)
      .text : 0xc0400000 - 0xc063282e   (2250 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 2196.69 BogoMIPS (lpj=1098346)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
lockdep: not fixing up alternatives.
ACPI: Core revision 20070126
ACPI Warning (dswload-0698): Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [OSB4] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [WAKE] had invalid type (Integer) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [RUNT] had invalid type (Integer) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope) [20070126]
CPU0: Intel Pentium III (Coppermine) stepping 0a
lockdep: not fixing up alternatives.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c080c000 soft=c07ec000
Initializing CPU#1
Calibrating delay using timer specific routine.. 2193.88 BogoMIPS (lpj=1096942)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (4390.57 BogoMIPS).
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... 
..... (found pin 0) ...works.
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=56 bytes
sizeof(inode)=604 bytes
sizeof(dentry)=160 bytes
sizeof(ext3inode)=856 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=3376 bytes
khelper used greatest stack depth: 3160 bytes left
khelper used greatest stack depth: 3084 bytes left
Booting paravirtualized kernel on bare hardware
Time:  9:28:32  Date: 07/15/107
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfda65, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
khelper used greatest stack depth: 2956 bytes left
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1)
ACPI: Using PIC for interrupt routing
khelper used greatest stack depth: 2792 bytes left
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
PCI: Discovered peer bus 01
PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 17
PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:0f.2[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:01:04.0[A] -> IRQ 24
PCI->APIC IRQ transform: 0000:01:04.1[B] -> IRQ 25
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Time: tsc clocksource has been installed.
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:00: iomem range 0x100000-0xfbffffff could not be reserved
pnp: 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:02: ioport range 0x40b-0x40b has been reserved
pnp: 00:02: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:02: ioport range 0xc14-0xc14 has been reserved
pnp: 00:02: ioport range 0xc49-0xc49 has been reserved
pnp: 00:02: ioport range 0xc52-0xc52 has been reserved
pnp: 00:02: ioport range 0xc6c-0xc6c has been reserved
NET: Registered protocol family 2
Time: acpi_pm clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3750k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1187170109.869:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 42CD8DF3F52729F5
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:04.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: duty_cycle spans bit 4
ACPI: duty_cycle spans bit 4
cpuidle: driver acpi_idle failed to attach to cpu 1
cpuidle: driver acpi_idle failed to attach to cpu 0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Generic RTC Driver v1.07
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.1 failed with error -22
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
khelper used greatest stack depth: 2744 bytes left
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
  Magic number: 3:19:475
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 568k freed
Write protecting the kernel read-only data: 861k
USB Universal Host Controller Interface driver v3.0
insmod used greatest stack depth: 2432 bytes left
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.2: irq 10, io mem 0xfeafc000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
insmod used greatest stack depth: 1888 bytes left
md: raid1 personality registered for level 1
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  2192.000 MB/sec
xor: using function: pIII_sse (2192.000 MB/sec)
async_tx: api initialized (async)
raid6: int32x1    312 MB/s
raid6: int32x2    328 MB/s
raid6: int32x4    332 MB/s
raid6: int32x8    324 MB/s
raid6: mmxx1      992 MB/s
raid6: mmxx2     1234 MB/s
raid6: sse1x1     898 MB/s
raid6: sse1x2    1226 MB/s
raid6: using algorithm sse1x2 (1226 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
SCSI subsystem initialized
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
        <Adaptec aic7899 Ultra160 SCSI adapter>
        aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
        <Adaptec aic7899 Ultra160 SCSI adapter>
        aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs

scsi 1:0:0:0: Direct-Access     FUJITSU  MAP3735NC        0108 PQ: 0 ANSI: 3
scsi1:A:0:0: Tagged Queuing enabled.  Depth 4
 target1:0:0: Beginning Domain Validation
libata version 2.21 loaded.
 target1:0:0: wide asynchronous
 target1:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
scsi2 : pata_serverworks
scsi3 : pata_serverworks
ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
 target1:0:0: Ending Domain Validation
scsi 1:0:1:0: Direct-Access     FUJITSU  MAP3735NC        5207 PQ: 0 ANSI: 3
scsi1:A:1:0: Tagged Queuing enabled.  Depth 4
 target1:0:1: Beginning Domain Validation
 target1:0:1: wide asynchronous
 target1:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
 target1:0:1: Ending Domain Validation
ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
scsi 1:0:6:0: Processor         ESG-SHV  SCA HSBP M14     0.01 PQ: 0 ANSI: 2
 target1:0:6: Beginning Domain Validation
 target1:0:6: Ending Domain Validation
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel redhat com
scsi: waiting for bus probes to complete ...
sd 1:0:0:0: [sda] 143571316 512-byte hardware sectors (73509 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: b3 00 00 08
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 143571316 512-byte hardware sectors (73509 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: b3 00 00 08
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:1:0: [sdb] 143571316 512-byte hardware sectors (73509 MB)
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: b9 00 00 08
sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:1:0: [sdb] 143571316 512-byte hardware sectors (73509 MB)
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: b9 00 00 08
sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3
sd 1:0:1:0: [sdb] Attached SCSI disk
scsi_scan_1 used greatest stack depth: 1536 bytes left
md: md1 stopped.
md: bind<sdb2>
md: bind<sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1187170151.284:2): selinux=0 auid=4294967295
awk used greatest stack depth: 1500 bytes left
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:1:0: Attached scsi generic sg1 type 0
scsi 1:0:6:0: Attached scsi generic sg2 type 3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (FF) as /class/input/input2
ACPI: Sleep Button (FF) [SLPF]
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100: eth0: e100_probe: addr 0xfeafe000, irq 17, MAC addr 00:02:B3:87:25:EA
piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
e100: eth1: e100_probe: addr 0xfeafd000, irq 16, MAC addr 00:02:B3:87:25:EB
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
No dock devices found.
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-12, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-13, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1028152k swap on /dev/sdb3.  Priority:-1 extents:1 across:1028152k
Adding 1028152k swap on /dev/sda3.  Priority:-2 extents:1 across:1028152k
rc.sysinit used greatest stack depth: 1212 bytes left
IA-32 Microcode Update Driver: v1.14a <tigran aivazian fsnet co uk>
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
bonding: MII link monitoring set to 100 ms
ADDRCONF(NETDEV_UP): bond0: link is not ready
bonding: bond0: Adding slave eth0.
e100: eth0: e100_watchdog: link up, 100Mbps, half-duplex
bonding: bond0: making interface eth0 the new active one.
bonding: bond0: enslaving eth0 as an active interface with an up link.
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready

=================================
[ INFO: inconsistent lock state ]
2.6.23-0.104.rc3.fc8 #1
---------------------------------
inconsistent {softirq-on-W} -> {in-softirq-W} usage.
events/0/9 [HC0[0]:SC1[2]:HE1:SE0] takes:
 (&(bond_info->tx_hashtbl_lock)){-+..}, at: [<f8ae4cc2>] bond_alb_xmit+0x26a/0x42c [bonding]
{softirq-on-W} state was registered at:
  [<c044a6e4>] __lock_acquire+0x4ff/0xc67
  [<c044b2c6>] lock_acquire+0x7b/0x9e
  [<c062ecc8>] _spin_lock+0x2e/0x58
  [<f8ae492e>] bond_alb_initialize+0x64/0x18e [bonding]
  [<f8ae1256>] bond_open+0x33/0x175 [bonding]
  [<c05ca8aa>] dev_open+0x31/0x6c
  [<c05c8a01>] dev_change_flags+0xa3/0x156
  [<c0609231>] devinet_ioctl+0x207/0x50e
  [<c06098df>] inet_ioctl+0x86/0xa4
  [<c05bec32>] sock_ioctl+0x1ac/0x1c9
  [<c0490b76>] do_ioctl+0x22/0x68
  [<c0490e05>] vfs_ioctl+0x249/0x25c
  [<c0490e61>] sys_ioctl+0x49/0x64
  [<c040519e>] syscall_call+0x7/0xb
  [<ffffffff>] 0xffffffff
irq event stamp: 266326
hardirqs last  enabled at (266326): [<c043258f>] local_bh_enable_ip+0xf3/0x106
hardirqs last disabled at (266325): [<c0432516>] local_bh_enable_ip+0x7a/0x106
softirqs last  enabled at (266306): [<c05e2d20>] rt_run_flush+0x6e/0x97
softirqs last disabled at (266309): [<c0407548>] do_softirq+0x74/0xf7

other info that might help us debug this:
3 locks held by events/0/9:
 #0:  (rtnl_mutex){--..}, at: [<c062d8a9>] mutex_lock+0x21/0x24
 #1:  (&bond->lock){-.-+}, at: [<f8ae4a90>] bond_alb_xmit+0x38/0x42c [bonding]
 #2:  (&bond->curr_slave_lock){..-+}, at: [<f8ae4a98>] bond_alb_xmit+0x40/0x42c [bonding]

stack backtrace:
 [<c04063d8>] show_trace_log_lvl+0x1a/0x2f
 [<c0406e71>] show_trace+0x12/0x14
 [<c0406e89>] dump_stack+0x16/0x18
 [<c0448f8a>] print_usage_bug+0x141/0x14b
 [<c0449810>] mark_lock+0x12f/0x472
 [<c044a66c>] __lock_acquire+0x487/0xc67
 [<c044b2c6>] lock_acquire+0x7b/0x9e
 [<c062ecc8>] _spin_lock+0x2e/0x58
 [<f8ae4cc2>] bond_alb_xmit+0x26a/0x42c [bonding]
 [<c05c9467>] dev_hard_start_xmit+0x21c/0x27a
 [<c05cb489>] dev_queue_xmit+0x1f7/0x2aa
 [<f8b274e0>] mld_sendpack+0x210/0x35a [ipv6]
 [<f8b28535>] mld_ifc_timer_expire+0x1e9/0x211 [ipv6]
 [<c0435a5f>] run_timer_softirq+0x127/0x18f
 [<c0432708>] __do_softirq+0x78/0xff
 [<c0407548>] do_softirq+0x74/0xf7
 [<c04325e6>] irq_exit+0x44/0x46
 [<c041d3a3>] smp_apic_timer_interrupt+0x74/0x81
 [<c0405cb7>] apic_timer_interrupt+0x33/0x38
 [<c062eba6>] _spin_unlock_bh+0x25/0x28
 [<c05e2d20>] rt_run_flush+0x6e/0x97
 [<c05e471c>] rt_cache_flush+0x7c/0xaf
 [<c060e86f>] fib_netdev_event+0x62/0x68
 [<c0630e6c>] notifier_call_chain+0x2b/0x4a
 [<c04391c8>] __raw_notifier_call_chain+0x19/0x1e
 [<c04391e7>] raw_notifier_call_chain+0x1a/0x1c
 [<c05c84f3>] netdev_state_change+0x20/0x31
 [<c05d251a>] __linkwatch_run_queue+0x159/0x183
 [<c05d2564>] linkwatch_event+0x20/0x27
 [<c043bd9b>] run_workqueue+0x7d/0x129
 [<c043c75b>] worker_thread+0xbb/0xc8
 [<c043ef6f>] kthread+0x3b/0x64
 [<c0405e5b>] kernel_thread_helper+0x7/0x10
 =======================
bonding: bond0: Adding slave eth1.
e100: eth1: e100_watchdog: link up, 100Mbps, half-duplex
bonding: bond0: enslaving eth1 as an active interface with an up link.
audit(1187170179.728:3): audit_pid=1885 old=0 by auid=4294967295
bond0: no IPv6 routers present
Installing knfsd (copyright (C) 1996 okir monad swb de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
mount.nfs4 used greatest stack depth: 716 bytes left
automount used greatest stack depth: 672 bytes left

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]