[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: F7t2 and QA Meeting



tor, 22.02.2007 kl. 19.51 -0500, skrev Dave Jones:
> On Thu, Feb 22, 2007 at 03:47:50PM -0500, Alan Cox wrote:
>  > On Thu, Feb 22, 2007 at 12:14:37PM +0100, Kjartan Maraas wrote:
>  > > Are these libata problems the cause of my VIA based laptop not enabling
>  > > DMA on the IDE attached HD after resume too maybe?
>  > 
>  > They might get you UDMA33 limited on resume and we seem to have a problem
>  > with simplex handling which you are eeing and I'm working on which gets you
>  > stuck in PIO4. 
>  > 
>  > The other problem you have though is 
>  > Feb  5 09:16:08 rivendell kernel: pnp: Device 00:02 activated.
>  > Feb  5 09:16:08 rivendell kernel: pnp: Failed to activate device 00:05.
>  > Feb  5 09:16:08 rivendell kernel: pnp: Device 00:0a does not support activation.
>  > 
>  > Has someone compiled in both PNP BIOS and ACPI. At the moment if you do that
>  > you get both in use which isn't allowed because the PNPBIOS code doesn't
>  > disable itself when ACPI is live.
> 
> CONFIG_PNPBIOS has been disabled for a looong time. It blew up on far
> too many machines when it was last attempted (FC2 era).
> 
I just updated the bugreport above with dmesg output from a boot/suspend
to disk/resume cycle which looks like this:

Cheers
Kjartan

Linux version 2.6.20-1.2940.fc7 (brewbuilder hs20-bc2-4 build redhat com) (gcc version 4.1.2 20070220 (Red Hat 4.1.2-2)) #1 SMP Thu Feb 22 13:11:42 EST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000003ded0000 end: 000000003dfd0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000003dfd0000 size: 0000000000020c00 end: 000000003dff0c00 type: 2
copy_e820_map() start: 000000003dff0c00 size: 000000000000b400 end: 000000003dffc000 type: 4
copy_e820_map() start: 000000003dffc000 size: 0000000000004000 end: 000000003e000000 type: 2
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003dfd0000 (usable)
 BIOS-e820: 000000003dfd0000 - 000000003dff0c00 (reserved)
 BIOS-e820: 000000003dff0c00 - 000000003dffc000 (ACPI NVS)
 BIOS-e820: 000000003dffc000 - 000000003e000000 (reserved)
95MB HIGHMEM available.
896MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 253904) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   253904
early_node_map[1] active PFN ranges
    0:        0 ->   253904
On node 0 totalpages: 253904
  DMA zone: 52 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4044 pages, LIFO batch:0
  Normal zone: 2860 pages used for memmap
  Normal zone: 222420 pages, LIFO batch:31
  HighMem zone: 311 pages used for memmap
  HighMem zone: 24217 pages, LIFO batch:3
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F7840, 0014 (r0 COMPAQ)
ACPI: RSDT 3DFF0C84, 002C (r1 COMPAQ CPQ005A  10120420 CPQ         1)
ACPI: FACP 3DFF0C00, 0084 (r2 COMPAQ CPQ005A         2 CPQ         1)
ACPI: DSDT 3DFF0CB0, 607E (r1 COMPAQ  EVON800    10000 MSFT  100000E)
ACPI: FACS 3DFFBE80, 0040
ACPI: SSDT 3DFF6D2E, 02E9 (r1 COMPAQ  CPQGysr     1001 MSFT  100000E)
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 40000000 (gap: 3e000000:c2000000)
Detected 597.096 MHz processor.
Built 1 zonelists.  Total pages: 250681
Kernel command line: ro root=LABEL=/ rhgb quiet selinux=off
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01cab000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c079e000 soft=c077e000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:    8
... MAX_LOCK_DEPTH:          30
... MAX_LOCKDEP_KEYS:        2048
... CLASSHASH_SIZE:           1024
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192
 memory used by lock dependency info: 1096 kB
 per task-struct memory footprint: 1200 bytes
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 991788k/1015616k available (2148k kernel code, 23104k reserved, 1138k data, 248k init, 98112k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc073b000 - 0xc0779000   ( 248 kB)
      .data : 0xc06190f1 - 0xc0735cb4   (1138 kB)
      .text : 0xc0400000 - 0xc06190f1   (2148 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1195.35 BogoMIPS (lpj=597679)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f1bf 00000000 00000000 00002040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0c20)
CPU0: Intel(R) Pentium(R) M processor 1.80GHz stepping 06
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=52 bytes
sizeof(inode)=564 bytes
sizeof(dentry)=156 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=2704 bytes
HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [C044] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-103f claimed by ali7101 ACPI
PCI quirk: region 1100-111f claimed by ali7101 SMB
Boot video device is 0000:01:05.0
ACPI: PCI Interrupt Routing Table [\_SB_.C044._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C044.C045._PRT]
ACPI: PCI Interrupt Link [C0C4] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [C0C5] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [C0C6] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0C7] (IRQs 5 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C0C8] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [C0C9] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [C0CA] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0CB] (IRQs 5 10 *11)
ACPI: Power Resource [C15A] (on)
ACPI: Power Resource [C15F] (on)
ACPI: Power Resource [C169] (on)
ACPI: Power Resource [C17A] (on)
ACPI: Power Resource [C1F2] (off)
ACPI: Power Resource [C1F3] (off)
ACPI: Power Resource [C1F4] (off)
ACPI: Power Resource [C1F5] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:00: iomem range 0x100000-0x3dffffff could not be reserved
pnp: 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
pnp: 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
pnp: 00:0d: ioport range 0x1000-0x107f could not be reserved
pnp: 00:0d: ioport range 0x1100-0x111f has been reserved
pnp: 00:0d: iomem range 0x98500000-0x98500fff has been reserved
pnp: 00:0e: iomem range 0xcf000-0xcffff has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: 2000-2fff
  MEM window: 90000000-900fffff
  PREFETCH window: 94000000-97ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0b.0
  IO window: 00001400-000014ff
  IO window: 00001800-000018ff
  PREFETCH window: 40000000-43ffffff
  MEM window: 44000000-47ffffff
PCI: Bus 6, cardbus bridge: 0000:00:0b.1
  IO window: 00001c00-00001cff
  IO window: 00003c00-00003cff
  PREFETCH window: 48000000-4bffffff
  MEM window: 4c000000-4fffffff
ACPI: PCI Interrupt Link [C0C6] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [C0C6] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:0b.1[A] -> Link [C0C6] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2781k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1172236548.499:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
ksign: Installing public key data
Loading keyring
- Added public key 50FF7A121872AA0A
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Activating ISA DMA hang workarounds.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Transitioning device [C1F6] to D3
ACPI: Transitioning device [C1F6] to D3
ACPI: Fan [C1F6] (off)
ACPI: Transitioning device [C1F7] to D3
ACPI: Transitioning device [C1F7] to D3
ACPI: Fan [C1F7] (off)
ACPI: Transitioning device [C1F8] to D3
ACPI: Transitioning device [C1F8] to D3
ACPI: Fan [C1F8] (off)
ACPI: Transitioning device [C1F9] to D3
ACPI: Transitioning device [C1F9] to D3
ACPI: Fan [C1F9] (off)
ACPI: Invalid PBLK length [7]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Thermal Zone [TZ1] (61 C)
ACPI: Thermal Zone [TZ2] (55 C)
ACPI: Thermal Zone [TZ3] (39 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected Ati IGP345M chipset
agpgart: AGP aperture is 64M @ 0x9c000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [C0CA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [C0CA] -> GSI 11 (level, low) -> IRQ 11
0000:00:08.0: ttyS1 at I/O 0x3428 (irq = 11) is a 8250
0000:00:08.0: ttyS3 at I/O 0x3440 (irq = 11) is a 8250
Couldn't register serial port 0000:00:08.0: -28
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Yenta: CardBus bridge found at 0000:00:0b.0 [0e11:005a]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
Yenta: CardBus bridge found at 0000:00:0b.1 [0e11:005a]
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:C177,PNP0f13:C178] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated.
 Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.
Using IPI No-Shortcut mode
Time: acpi_pm clocksource has been installed.
Switched to high resolution mode on CPU 0
Freeing unused kernel memory: 248k freed
Write protecting the kernel read-only data: 840k
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [C0C5] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:12.0: irq 10, io mem 0x98380000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:12.1[B] -> Link [C0C5] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:12.1: irq 10, io mem 0x98400000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1b6eb1, caps: 0xa84793/0x100000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ACPI: PCI Interrupt 0000:00:12.2[C] -> Link [C0C5] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
usb 1-3: new full speed USB device using ohci_hcd and address 2
ehci_hcd 0000:00:12.2: irq 10, io mem 0x98480000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
SCSI subsystem initialized
libata version 2.10 loaded.
ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [C0C4] -> GSI 10 (level, low) -> IRQ 10
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00013800 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00013808 irq 15
scsi0 : pata_ali
ata1.00: ATA-6: HTS541080G9AT00, MB4OA60A, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/100
scsi1 : pata_ali
usb 1-3: new full speed USB device using ohci_hcd and address 3
scsi 0:0:0:0: Direct-Access     ATA      HTS541080G9AT00  MB4O PQ: 0 ANSI: 5
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: Attached scsi disk sda
usb 1-3: configuration #1 chosen from 1 choice
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PS/2 Generic Mouse as /class/input/input3
cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Floppy drive(s): fd0 is 1.44M
sd 0:0:0:0: Attached scsi generic sg0 type 0
alim7101_wdt: Steve Hill <steve navaho co uk>.
alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
floppy0: no floppy controllers found
ali15x3_smbus 0000:00:11.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
ali15x3_smbus 0000:00:11.0: ALI15X3 not detected, module not inserted.
alim7101_wdt: Steve Hill <steve navaho co uk>.
alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
ACPI: PCI Interrupt Link [C0CB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [C0CB] -> GSI 11 (level, low) -> IRQ 11
input: PC Speaker as /class/input/input4
tpm_inf_pnp 00:05: Found C16C with ID IFX0101
tpm_inf_pnp 00:05: TPM found: config base 0x7e, io base 0x1410, chip version 0x0006, vendor id 0x15d1 (Infineon), product id 0x0006 (SLD 9630 TT 1.1)
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
AC'97 1 does not respond - RESET
AC'97 1 access is not valid [0xffffffff], removing mixer.
ali mixer 1 creating error.
tg3.c:v3.73 (February 12, 2007)
ACPI: PCI Interrupt Link [C0C8] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [C0C8] -> GSI 10 (level, low) -> IRQ 10
eth0: Tigon3 [partno(BCM5705mA1) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:11:85:84:99:ae
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] 
eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
pnp: Device 00:09 does not support disabling.
rtc_cmos: probe of 00:09 failed with error -16
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
lp0: using parport0 (interrupt-driven).
lp0: console ready
sonypi: Sony Programmable I/O Controller Driver v1.26.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [C0C4] -> GSI 10 (level, low) -> IRQ 10
[drm] Initialized radeon 1.25.0 20060524 on minor 0
ACPI: AC Adapter [C137] (off-line)
ACPI: Battery Slot [C139] (battery present)
ACPI: Battery Slot [C138] (battery absent)
No dock devices found.
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [C13B]
input: Lid Switch as /class/input/input7
ACPI: Lid Switch [C13A]
ibm_acpi: ec object not found
ACPI: Video Device [C046] (multi-head: yes  rom: no  post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel redhat com
EXT3 FS on sda2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2048276k swap on /dev/sda3.  Priority:-1 extents:1 across:2048276k
Clocksource tsc unstable (delta = 79208949 ns)
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (7934 buckets, 63472 max)
PM: Writing back config space on device 0000:00:13.0 at offset b (was 165d14e4, writing 5a0e11)
PM: Writing back config space on device 0000:00:13.0 at offset 3 (was 0, writing 4010)
PM: Writing back config space on device 0000:00:13.0 at offset 2 (was 2000000, writing 2000003)
PM: Writing back config space on device 0000:00:13.0 at offset 1 (was 2b00000, writing 2b00006)
ADDRCONF(NETDEV_UP): eth0: link is not ready
PM: Writing back config space on device 0000:00:13.0 at offset b (was 165d14e4, writing 5a0e11)
PM: Writing back config space on device 0000:00:13.0 at offset 3 (was 0, writing 4010)
PM: Writing back config space on device 0000:00:13.0 at offset 2 (was 2000000, writing 2000003)
PM: Writing back config space on device 0000:00:13.0 at offset 1 (was 2b00000, writing 2b00006)
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
[drm] Setting GART location based on old memory map
[drm] writeback test succeeded in 1 usecs
Stopping tasks ... done.
Shrinking memory...  -\|done (38974 pages freed)
Freed 155896 kbytes in 0.53 seconds (294.14 MB/s)
Suspending console(s)
pnp: Device 00:04 disabled.
pnp: Device 00:02 disabled.
ACPI: PCI interrupt for device 0000:00:12.2 disabled
ACPI: PCI interrupt for device 0000:00:12.1 disabled
ACPI: PCI interrupt for device 0000:00:12.0 disabled
ACPI: PCI interrupt for device 0000:00:06.0 disabled
pci_set_power_state(): 0000:00:00.0: state=3, current state=5
Disabling non-boot CPUs ...
swsusp: critical section: 
swsusp: Need to copy 114846 pages
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
PM: Writing back config space on device 0000:00:06.0 at offset 1 (was c2900007, writing c2900003)
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [C0CB] -> GSI 11 (level, low) -> IRQ 11
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
BUG: warning at drivers/pci/pci.c:823/pcim_enable_device() (Not tainted)
 [<c04062a5>] show_trace_log_lvl+0x1a/0x2f
 [<c0406869>] show_trace+0x12/0x14
 [<c04068ed>] dump_stack+0x16/0x18
 [<c04fb8c7>] pcim_enable_device+0x9e/0xbb
 [<f8906124>] ata_pci_device_do_resume+0x1f/0x5d [libata]
 [<f890691b>] ata_pci_device_resume+0x10/0x23 [libata]
 [<f8863193>] ali_reinit_one+0x12/0x15 [pata_ali]
 [<c04fd918>] pci_device_resume+0x1a/0x44
 [<c0566cdd>] resume_device+0xa7/0xe0
 [<c0566d92>] dpm_resume+0x7c/0xd5
 [<c0566e2f>] device_resume+0x44/0x5d
 [<c044d634>] pm_suspend_disk+0x279/0x28d
 [<c044c327>] enter_state+0x51/0x189
 [<c044c4e5>] state_store+0x86/0x9c
 [<c04b7428>] subsys_attr_store+0x20/0x25
 [<c04b7547>] sysfs_write_file+0xc6/0xee
 [<c047f20b>] vfs_write+0xaf/0x163
 [<c047f859>] sys_write+0x3d/0x61
 [<c0405134>] syscall_call+0x7/0xb
 =======================
PCI: Enabling device 0000:00:12.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [C0C5] -> GSI 10 (level, low) -> IRQ 10
PCI: Enabling device 0000:00:12.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:12.1[B] -> Link [C0C5] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:12.2[C] -> Link [C0C5] -> GSI 10 (level, low) -> IRQ 10
usb usb3: root hub lost power or was reset
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [C0C4] -> GSI 10 (level, low) -> IRQ 10
pnp: Device 00:02 activated.
pnp: Device 00:04 activated.
pnp: Failed to activate device 00:05.
pnp: Device 00:0a does not support activation.
pnp: Device 00:0b does not support activation.
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
ata1: soft resetting port
 usbdev1.3_ep00: PM: resume from 0, parent 1-3 still 1
hci_usb 1-3:1.0: PM: resume from 1, parent 1-3 still 1
 usbdev1.3_ep81: PM: resume from 0, parent 1-3:1.0 still 1
 usbdev1.3_ep02: PM: resume from 0, parent 1-3:1.0 still 1
 usbdev1.3_ep82: PM: resume from 0, parent 1-3:1.0 still 1
hci_usb 1-3:1.1: PM: resume from 1, parent 1-3 still 1
usb 1-3:1.2: PM: resume from 1, parent 1-3 still 1
 usbdev1.3: PM: resume from 0, parent 1-3 still 1
 usbdev1.3_ep03: PM: resume from 0, parent 1-3:1.1 still 1
 usbdev1.3_ep83: PM: resume from 0, parent 1-3:1.1 still 1
 hci0: PM: resume from 0, parent 1-3:1.0 still 1
Restarting tasks ... done.
ata1.00: simplex DMA is claimed by other device, disabling DMA
ata1.00: configured for PIO4
ata1: EH complete
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
usb 1-3: USB disconnect, address 3
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
input: Power Button (FF) as /class/input/input8
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input9
ACPI: Sleep Button (CM) [C13B]
input: Lid Switch as /class/input/input10
ACPI: Lid Switch [C13A]
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]