[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[Fedora-directory-commits] ldapserver config.h.in, 1.8, 1.9 aclocal.m4, 1.46, 1.47 configure, 1.57, 1.58 missing, 1.36, 1.37 install-sh, 1.36, 1.37 depcomp, 1.36, 1.37 compile, 1.35, 1.36 config.sub, 1.35, 1.36 config.guess, 1.35, 1.36 Makefile.in, 1.64, 1.65



Author: rmeggins

Update of /cvs/dirsec/ldapserver
In directory cvs-int.fedora.redhat.com:/tmp/cvs-serv23842

Modified Files:
	config.h.in aclocal.m4 configure missing install-sh depcomp 
	compile config.sub config.guess Makefile.in 
Log Message:
revert back to using autoconf 2.59 - 2.61 causes the -avoid-version flag to be ignored, which causes rpm packaging errors


Index: config.h.in
===================================================================
RCS file: /cvs/dirsec/ldapserver/config.h.in,v
retrieving revision 1.8
retrieving revision 1.9
diff -u -r1.8 -r1.9
--- config.h.in	8 Aug 2007 22:31:55 -0000	1.8
+++ config.h.in	9 Aug 2007 00:10:32 -0000	1.9
@@ -365,7 +365,7 @@
 /* Define to `int' if <sys/types.h> does not define. */
 #undef pid_t
 
-/* Define to `unsigned int' if <sys/types.h> does not define. */
+/* Define to `unsigned' if <sys/types.h> does not define. */
 #undef size_t
 
 /* SunOS5 */


Index: aclocal.m4
===================================================================
RCS file: /cvs/dirsec/ldapserver/aclocal.m4,v
retrieving revision 1.46
retrieving revision 1.47
diff -u -r1.46 -r1.47
--- aclocal.m4	8 Aug 2007 22:31:55 -0000	1.46
+++ aclocal.m4	9 Aug 2007 00:10:32 -0000	1.47
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10 -*- Autoconf -*-
+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006  Free Software Foundation, Inc.
+# 2005  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -11,11 +11,6 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
-m4_if(m4_PACKAGE_VERSION, [2.61],,
-[m4_fatal([this file was generated for autoconf 2.61.
-You have another version of autoconf.  If you want to use that,
-you should regenerate the build system entirely.], [63])])
-
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 
 # serial 48 AC_PROG_LIBTOOL
@@ -1602,7 +1597,7 @@
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/^[	 ]*//;s/#.*//;/^[^\/]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
   fi
 
@@ -4310,6 +4305,9 @@
 # Is the compiler the GNU C compiler?
 with_gcc=$_LT_AC_TAGVAR(GCC, $1)
 
+gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\`
+gcc_ver=\`gcc -dumpversion\`
+
 # An ERE matcher.
 EGREP=$lt_EGREP
 
@@ -4443,11 +4441,11 @@
 
 # Dependencies to place before the objects being linked to create a
 # shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
+predep_objects=\`echo $lt_[]_LT_AC_TAGVAR(predep_objects, $1) | \$SED -e "s \${gcc_dir}@\\\${gcc_dir} g;s \${gcc_ver}@\\\${gcc_ver} g"\`
 
 # Dependencies to place after the objects being linked to create a
 # shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
+postdep_objects=\`echo $lt_[]_LT_AC_TAGVAR(postdep_objects, $1) | \$SED -e "s \${gcc_dir}@\\\${gcc_dir} g;s \${gcc_ver}@\\\${gcc_ver} g"\`
 
 # Dependencies to place before the objects being linked to create a
 # shared library.
@@ -4459,7 +4457,7 @@
 
 # The library search path used internally by the compiler when linking
 # a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
+compiler_lib_search_path=\`echo $lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) | \$SED -e "s \${gcc_dir}@\\\${gcc_dir} g;s \${gcc_ver}@\\\${gcc_ver} g"\`
 
 # Method to check whether dependent libraries are shared objects.
 deplibs_check_method=$lt_deplibs_check_method
@@ -4539,7 +4537,7 @@
 link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
 
 # Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s \${gcc_dir}@\\\${gcc_dir} g;s \${gcc_ver}@\\\${gcc_ver} g"\`
 
 # Run-time system search path for libraries
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
@@ -6412,7 +6410,7 @@
 AC_MSG_RESULT([$SED])
 ])
 
-# Copyright (C) 2002, 2003, 2005, 2006  Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -6422,29 +6420,14 @@
 # ----------------------------
 # Automake X.Y traces this macro to ensure aclocal.m4 has been
 # generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.10'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.10], [],
-      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too.  Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
 
 # AM_SET_CURRENT_AUTOMAKE_VERSION
 # -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# Call AM_AUTOMAKE_VERSION so it can be traced.
 # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10])dnl
-_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
+	 [AM_AUTOMAKE_VERSION([1.9.6])])
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
@@ -6501,14 +6484,14 @@
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 8
+# serial 7
 
 # AM_CONDITIONAL(NAME, SHELL-CONDITION)
 # -------------------------------------
@@ -6517,10 +6500,8 @@
 [AC_PREREQ(2.52)dnl
  ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
 	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
 if $2; then
   $1_TRUE=
   $1_FALSE='#'
@@ -6534,14 +6515,15 @@
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 9
+# serial 8
 
 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
 # written in clear, in which case automake, when reading aclocal.m4,
@@ -6569,7 +6551,6 @@
 ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
        [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
        [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
        [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
                    [depcc="$$1"   am_compiler_list=])
 
@@ -6635,7 +6616,6 @@
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
        $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
          >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -6688,8 +6668,7 @@
   AMDEPBACKSLASH='\'
 fi
 AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([AMDEPBACKSLASH])
 ])
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
@@ -6714,9 +6693,8 @@
   # some people rename them; so instead we look at the file content.
   # Grep'ing the first line is not enough: some people post-process
   # each Makefile.in and add a new line on top of each file to say so.
-  # Grep'ing the whole file is not good either: AIX grep has a line
-  # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
+  # So let's grep whole file.
+  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
     dirpart=`AS_DIRNAME("$mf")`
   else
     continue
@@ -6763,8 +6741,8 @@
 
 # Do all the work for Automake.                             -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -6787,20 +6765,16 @@
 # arguments mandatory, and then we can depend on a new Autoconf
 # release and drop the old call support.
 AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.60])dnl
+[AC_PREREQ([2.58])dnl
 dnl Autoconf wants to disallow AM_ names.  We explicitly allow
 dnl the ones we care about.
 m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
 AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
 AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-  fi
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+   test -f $srcdir/config.status; then
+  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
 fi
 
 # test whether we have cygpath
@@ -6820,9 +6794,6 @@
  AC_SUBST([PACKAGE], [$1])dnl
  AC_SUBST([VERSION], [$2])],
 [_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
-  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
  AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
  AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
 
@@ -6858,10 +6829,6 @@
                   [_AM_DEPENDENCIES(CXX)],
                   [define([AC_PROG_CXX],
                           defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-                  [_AM_DEPENDENCIES(OBJC)],
-                  [define([AC_PROG_OBJC],
-                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
 ])
 ])
 
@@ -6897,7 +6864,7 @@
 # Define $install_sh.
 AC_DEFUN([AM_PROG_INSTALL_SH],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
 AC_SUBST(install_sh)])
 
 # Copyright (C) 2003, 2005  Free Software Foundation, Inc.
@@ -7002,14 +6969,13 @@
 rm -f confinc confmf
 ])
 
-# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2001, 2003, 2005  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
+# serial 3
 
 # AM_PROG_CC_C_O
 # --------------
@@ -7017,7 +6983,6 @@
 AC_DEFUN([AM_PROG_CC_C_O],
 [AC_REQUIRE([AC_PROG_CC_C_O])dnl
 AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([compile])dnl
 # FIXME: we rely on the cache variable name because
 # there is no other way.
 set dummy $CC
@@ -7030,22 +6995,18 @@
    # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
    CC="$am_aux_dir/compile $CC"
 fi
-dnl Make sure AC_PROG_CC is never called again, or it will override our
-dnl setting of CC.
-m4_define([AC_PROG_CC],
-          [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])])
 ])
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
+# serial 4
 
 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
@@ -7061,7 +7022,6 @@
 # If it does, set am_missing_run to use it, otherwise, to nothing.
 AC_DEFUN([AM_MISSING_HAS_RUN],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
 test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
@@ -7072,7 +7032,7 @@
 fi
 ])
 
-# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+# Copyright (C) 2003, 2004, 2005  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -7080,23 +7040,60 @@
 
 # AM_PROG_MKDIR_P
 # ---------------
-# Check for `mkdir -p'.
+# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+#
+# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+# created by `make install' are always world readable, even if the
+# installer happens to have an overly restrictive umask (e.g. 077).
+# This was a mistake.  There are at least two reasons why we must not
+# use `-m 0755':
+#   - it causes special bits like SGID to be ignored,
+#   - it may be too restrictive (some setups expect 775 directories).
+#
+# Do not use -m 0755 and let people choose whatever they expect by
+# setting umask.
+#
+# We cannot accept any implementation of `mkdir' that recognizes `-p'.
+# Some implementations (such as Solaris 8's) are not thread-safe: if a
+# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
+# concurrently, both version can detect that a/ is missing, but only
+# one can create it and the other will error out.  Consequently we
+# restrict ourselves to GNU make (using the --version option ensures
+# this.)
 AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
-  [[\\/$]]* | ?:[[\\/]]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
+[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+  # We used to keeping the `.' as first argument, in order to
+  # allow $(mkdir_p) to be used without argument.  As in
+  #   $(mkdir_p) $(somedir)
+  # where $(somedir) is conditionally defined.  However this is wrong
+  # for two reasons:
+  #  1. if the package is installed by a user who cannot write `.'
+  #     make install will fail,
+  #  2. the above comment should most certainly read
+  #     $(mkdir_p) $(DESTDIR)$(somedir)
+  #     so it does not work when $(somedir) is undefined and
+  #     $(DESTDIR) is not.
+  #  To support the latter case, we have to write
+  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+  #  so the `.' trick is pointless.
+  mkdir_p='mkdir -p --'
+else
+  # On NextStep and OpenStep, the `mkdir' command does not
+  # recognize any option.  It will interpret all options as
+  # directories to create, and then abort because `.' already
+  # exists.
+  for d in ./-p ./--version;
+  do
+    test -d $d && rmdir $d
+  done
+  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+  if test -f "$ac_aux_dir/mkinstalldirs"; then
+    mkdir_p='$(mkinstalldirs)'
+  else
+    mkdir_p='$(install_sh) -d'
+  fi
+fi
+AC_SUBST([mkdir_p])])
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
@@ -7208,21 +7205,9 @@
 if test "$cross_compiling" != no; then
   AC_CHECK_TOOL([STRIP], [strip], :)
 fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
-# Copyright (C) 2006  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
 # Check how to create a tarball.                            -*- Autoconf -*-
 
 # Copyright (C) 2004, 2005  Free Software Foundation, Inc.


View full diff with command:
/usr/bin/cvs -f diff  -kk -u -N -r 1.57 -r 1.58 configure
Index: configure
===================================================================
RCS file: /cvs/dirsec/ldapserver/configure,v
retrieving revision 1.57
retrieving revision 1.58
diff -u -r1.57 -r1.58
--- configure	8 Aug 2007 22:31:55 -0000	1.57
+++ configure	9 Aug 2007 00:10:32 -0000	1.58
@@ -1,56 +1,27 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for fedora-ds 1.1.0a4.
+# Generated by GNU Autoconf 2.59 for fedora-ds 1.1.0a4.
 #
 # Report bugs to <http://bugzilla.redhat.com/>.
 #
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# Copyright (C) 2003 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
 
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
+# Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
 fi
+DUALCASE=1; export DUALCASE # for MKS sh
 
 # Support unset when possible.
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -60,43 +31,8 @@
 fi
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" ""	$as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-case $0 in
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  { (exit 1); exit 1; }
-fi
-
 # Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
+$as_unset ENV MAIL MAILPATH
 PS1='$ '
 PS2='> '
 PS4='+ '
@@ -110,19 +46,18 @@
   if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+    $as_unset $as_var
   fi
 done
 
 # Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+if expr a : '\(a\)' >/dev/null 2>&1; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
@@ -130,388 +65,157 @@
 
 
 # Name of the executable.
-as_me=`$as_basename -- "$0" ||
+as_me=`$as_basename "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
 echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
 
 
-if test "x$CONFIG_SHELL" = x; then
-  if (eval ":") 2>/dev/null; then
-  as_have_required=yes
-else
-  as_have_required=no
-fi
-
-  if test $as_have_required = yes && 	 (eval ":
-(as_func_return () {
-  (exit \$1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
-
-exitcode=0
-if as_func_success; then
-  :
[...17225 lines suppressed...]
-    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
+
+
+  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
+echo "$as_me: executing $ac_dest commands" >&6;}
+  case $ac_dest in
+    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
   # Strip MF so we end up with the name of the file.
   mf=`echo "$mf" | sed -e 's/:.*$//'`
   # Check whether this is an Automake generated Makefile or not.
@@ -27283,32 +26705,20 @@
   # some people rename them; so instead we look at the file content.
   # Grep'ing the first line is not enough: some people post-process
   # each Makefile.in and add a new line on top of each file to say so.
-  # Grep'ing the whole file is not good either: AIX grep has a line
-  # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
-    dirpart=`$as_dirname -- "$mf" ||
+  # So let's grep whole file.
+  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+    dirpart=`(dirname "$mf") 2>/dev/null ||
 $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$mf" : 'X\(//\)[^/]' \| \
 	 X"$mf" : 'X\(//\)$' \| \
-	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+	 X"$mf" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
 echo X"$mf" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
   else
     continue
   fi
@@ -27330,79 +26740,53 @@
        sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
     # Make sure the directory exists.
     test -f "$dirpart/$file" && continue
-    fdir=`$as_dirname -- "$file" ||
+    fdir=`(dirname "$file") 2>/dev/null ||
 $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$file" : 'X\(//\)[^/]' \| \
 	 X"$file" : 'X\(//\)$' \| \
-	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+	 X"$file" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
 echo X"$file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-    { as_dir=$dirpart/$fdir
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    { if $as_mkdir_p; then
+    mkdir -p $dirpart/$fdir
+  else
+    as_dir=$dirpart/$fdir
     as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
 echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
     done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
+echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
    { (exit 1); exit 1; }; }; }
+
     # echo "creating $dirpart/$file"
     echo '# dummy' > "$dirpart/$file"
   done
 done
  ;;
-
   esac
-done # for ac_tag
+done
+_ACEOF
 
+cat >>$CONFIG_STATUS <<\_ACEOF
 
 { (exit 0); exit 0; }
 _ACEOF


Index: missing
===================================================================
RCS file: /cvs/dirsec/ldapserver/missing,v
retrieving revision 1.36
retrieving revision 1.37
diff -u -r1.36 -r1.37
--- missing	8 Aug 2007 22:31:55 -0000	1.36
+++ missing	9 Aug 2007 00:10:32 -0000	1.37
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 
-scriptversion=2006-05-10.23
+scriptversion=2005-06-08.21
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
 #   Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard iro umontreal ca>, 1996.
 
@@ -33,8 +33,6 @@
 fi
 
 run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
 
 # In the cases where this matters, `missing' is being run in the
 # srcdir already.
@@ -46,7 +44,7 @@
 
 msg="missing on your system"
 
-case $1 in
+case "$1" in
 --run)
   # Try to run requested program, and just exit if it succeeds.
   run=
@@ -79,7 +77,6 @@
   aclocal      touch file \`aclocal.m4'
   autoconf     touch file \`configure'
   autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
   automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c
@@ -109,7 +106,7 @@
 # Now exit if we have it, but it failed.  Also exit now if we
 # don't have it and --version was passed (most likely to detect
 # the program).
-case $1 in
+case "$1" in
   lex|yacc)
     # Not GNU programs, they don't have --version.
     ;;
@@ -138,7 +135,7 @@
 
 # If it does not exist, or fails to run (possibly an outdated version),
 # try to emulate it.
-case $1 in
+case "$1" in
   aclocal*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
@@ -167,7 +164,7 @@
     test -z "$files" && files="config.h"
     touch_files=
     for f in $files; do
-      case $f in
+      case "$f" in
       *:*) touch_files="$touch_files "`echo "$f" |
 				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
       *) touch_files="$touch_files $f.in";;
@@ -195,8 +192,8 @@
          You can get \`$1' as part of \`Autoconf' from any GNU
          archive site."
 
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
     if test -f "$file"; then
 	touch $file
     else
@@ -217,25 +214,25 @@
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
     rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
+    if [ $# -ne 1 ]; then
         eval LASTARG="\${$#}"
-	case $LASTARG in
+	case "$LASTARG" in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
+	    if [ -f "$SRCFILE" ]; then
 	         cp "$SRCFILE" y.tab.c
 	    fi
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
+	    if [ -f "$SRCFILE" ]; then
 	         cp "$SRCFILE" y.tab.h
 	    fi
 	  ;;
 	esac
     fi
-    if test ! -f y.tab.h; then
+    if [ ! -f y.tab.h ]; then
 	echo >y.tab.h
     fi
-    if test ! -f y.tab.c; then
+    if [ ! -f y.tab.c ]; then
 	echo 'main() { return 0; }' >y.tab.c
     fi
     ;;
@@ -247,18 +244,18 @@
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
     rm -f lex.yy.c
-    if test $# -ne 1; then
+    if [ $# -ne 1 ]; then
         eval LASTARG="\${$#}"
-	case $LASTARG in
+	case "$LASTARG" in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
+	    if [ -f "$SRCFILE" ]; then
 	         cp "$SRCFILE" lex.yy.c
 	    fi
 	  ;;
 	esac
     fi
-    if test ! -f lex.yy.c; then
+    if [ ! -f lex.yy.c ]; then
 	echo 'main() { return 0; }' >lex.yy.c
     fi
     ;;
@@ -270,9 +267,11 @@
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."
 
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
 	touch $file
     else
 	test -z "$file" || exec >$file
@@ -290,17 +289,11 @@
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
     # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
     if test -z "$file"; then
       # ... or it is the one specified with @setfilename ...
       infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^ setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
+      file=`sed -n '/^ setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
       # ... or it is derived from the source name (dir/f.texi becomes f.info)
       test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
@@ -324,13 +317,13 @@
     fi
     firstarg="$1"
     if shift; then
-	case $firstarg in
+	case "$firstarg" in
 	*o*)
 	    firstarg=`echo "$firstarg" | sed s/o//`
 	    tar "$firstarg" "$@" && exit 0
 	    ;;
 	esac
-	case $firstarg in
+	case "$firstarg" in
 	*h*)
 	    firstarg=`echo "$firstarg" | sed s/h//`
 	    tar "$firstarg" "$@" && exit 0


Index: install-sh
===================================================================
RCS file: /cvs/dirsec/ldapserver/install-sh,v
retrieving revision 1.36
retrieving revision 1.37
diff -u -r1.36 -r1.37
--- install-sh	8 Aug 2007 22:31:55 -0000	1.36
+++ install-sh	9 Aug 2007 00:10:32 -0000	1.37
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2006-10-14.15
+scriptversion=2005-05-14.22
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -39,24 +39,15 @@
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" ""	$nl"
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
 
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
 doit="${DOITPROG-}"
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
 
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
+# put in absolute paths if you don't have them in your path; or use env. vars.
 
 mvprog="${MVPROG-mv}"
 cpprog="${CPPROG-cp}"
@@ -67,13 +58,7 @@
 rmprog="${RMPROG-rm}"
 mkdirprog="${MKDIRPROG-mkdir}"
 
-posix_glob=
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chmodcmd=$chmodprog
+chmodcmd="$chmodprog 0755"
 chowncmd=
 chgrpcmd=
 stripcmd=
@@ -110,7 +95,7 @@
   CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
 "
 
-while test $# -ne 0; do
+while test -n "$1"; do
   case $1 in
     -c) shift
         continue;;
@@ -126,15 +111,9 @@
 
     --help) echo "$usage"; exit $?;;
 
-    -m) mode=$2
+    -m) chmodcmd="$chmodprog $2"
         shift
         shift
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
         continue;;
 
     -o) chowncmd="$chownprog $2"
@@ -157,33 +136,25 @@
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
-    --)	shift
+    *)  # When -d is used, all remaining arguments are directories to create.
+	# When -t is used, the destination is already specified.
+	test -n "$dir_arg$dstarg" && break
+        # Otherwise, the last argument is the destination.  Remove it from $  
+	for arg
+	do
+          if test -n "$dstarg"; then
+	    # $@ is not empty: it contains at least $arg.
+	    set fnord "$@" "$dstarg"
+	    shift # fnord
+	  fi
+	  shift # arg
+	  dstarg=$arg
+	done
 	break;;
-
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
-
-    *)  break;;
   esac
 done
 
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $  
-  for arg
-  do
-    if test -n "$dstarg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dstarg"
-      shift # fnord
-    fi
-    shift # arg
-    dstarg=$arg
-  done
-fi
-
-if test $# -eq 0; then
+if test -z "$1"; then
   if test -z "$dir_arg"; then
     echo "$0: no input file specified." >&2
     exit 1
@@ -193,33 +164,6 @@
   exit 0
 fi
 
-if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
 for src
 do
   # Protect names starting with `-'.
@@ -229,11 +173,15 @@
 
   if test -n "$dir_arg"; then
     dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
+    src=
 
+    if test -d "$dst"; then
+      mkdircmd=:
+      chmodcmd=
+    else
+      mkdircmd=$mkdirprog
+    fi
+  else
     # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
     # might cause directories to be created, which would be especially bad
     # if $src (and thus $dsttmp) contains '*'.
@@ -260,188 +208,53 @@
 	echo "$0: $dstarg: Is a directory" >&2
 	exit 1
       fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
+      dst=$dst/`basename "$src"`
     fi
   fi
 
-  obsolete_mkdir_used=false
+  # This sed command emulates the dirname command.
+  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
 
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
-    esac
+  # Make sure that the destination directory exists.
 
-    if
-      $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
+  # Skip lots of stat calls in the usual case.
+  if test ! -d "$dstdir"; then
+    defaultIFS='
+	 '
+    IFS="${IFS-$defaultIFS}"
+
+    oIFS=$IFS
+    # Some sh's can't handle IFS=/ for some reason.
+    IFS='%'
+    set x `echo "$dstdir" | sed -e 's@/@% g' -e 's ^%@/@'`
+    shift
+    IFS=$oIFS
 
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-	/*) prefix=/ ;;
-	-*) prefix=./ ;;
-	*)  prefix= ;;
-      esac
-
-      case $posix_glob in
-        '')
-	  if (set -f) 2>/dev/null; then
-	    posix_glob=true
-	  else
-	    posix_glob=false
-	  fi ;;
-      esac
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob && set -f
-      set fnord $dstdir
-      shift
-      $posix_glob && set +f
-      IFS=$oIFS
+    pathcomp=
 
-      prefixes=
-
-      for d
-      do
-	test -z "$d" && continue
-
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
+    while test $# -ne 0 ; do
+      pathcomp=$pathcomp$1
+      shift
+      if test ! -d "$pathcomp"; then
+        $mkdirprog "$pathcomp"
+	# mkdir can fail with a `File exist' error in case several
+	# install-sh are creating the directory concurrently.  This
+	# is OK.
+	test -d "$pathcomp" || exit
       fi
-    fi
+      pathcomp=$pathcomp/
+    done
   fi
 
   if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+    $doit $mkdircmd "$dst" \
+      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
   else
+    dstfile=`basename "$dst"`
 
     # Make a couple of temp file names in the proper directory.
     dsttmp=$dstdir/_inst.$$_
@@ -449,9 +262,10 @@
 
     # Trap to clean up those temp files at exit.
     trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+    trap '(exit $?); exit' 1 2 13 15
 
     # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+    $doit $cpprog "$src" "$dsttmp" &&
 
     # and set any options; do chmod last to preserve setuid bits.
     #
@@ -462,10 +276,10 @@
     { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
       && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
       && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
 
     # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
       || {
 	   # The rename failed, perhaps because mv can't rename something else
 	   # to itself, or perhaps because mv is so ancient that it does not
@@ -477,12 +291,11 @@
 	   # reasons.  In this case, the final cleanup might fail but the new
 	   # file should still install successfully.
 	   {
-	     if test -f "$dst"; then
-	       $doit $rmcmd -f "$dst" 2>/dev/null \
-	       || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
-		     && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
+	     if test -f "$dstdir/$dstfile"; then
+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
 	       || {
-		 echo "$0: cannot unlink or rename $dst" >&2
+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
 		 (exit 1); exit 1
 	       }
 	     else
@@ -491,14 +304,17 @@
 	   } &&
 
 	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dst"
+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
 	 }
-    } || exit 1
-
-    trap '' 0
-  fi
+    }
+  fi || { (exit 1); exit 1; }
 done
 
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+  (exit 0); exit 0
+}
+
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="


Index: depcomp
===================================================================
RCS file: /cvs/dirsec/ldapserver/depcomp,v
retrieving revision 1.36
retrieving revision 1.37
diff -u -r1.36 -r1.37
--- depcomp	8 Aug 2007 22:31:55 -0000	1.36
+++ depcomp	9 Aug 2007 00:10:32 -0000	1.37
@@ -1,10 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2006-10-15.18
+scriptversion=2005-07-09.11
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
-# Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -92,20 +91,7 @@
 ## gcc 3 implements dependency tracking that does exactly what
 ## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
 ## it if -MD -MP comes after the -MF stuff.  Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am.  Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
-  for arg
-  do
-    case $arg in
-    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
-    *)  set fnord "$@" "$arg" ;;
-    esac
-    shift # fnord
-    shift # $arg
-  done
-  "$@"
+  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
   stat=$?
   if test $stat -eq 0; then :
   else
@@ -290,46 +276,6 @@
   rm -f "$tmpdepfile"
   ;;
 
-hp2)
-  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
-  # compilers, which have integrated preprocessors.  The correct option
-  # to use with these is +Maked; it writes dependencies to a file named
-  # 'foo.d', which lands next to the object file, wherever that
-  # happens to be.
-  # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir.libs/$base.d
-    "$@" -Wc,+Maked
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    "$@" +Maked
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-     rm -f "$tmpdepfile1" "$tmpdepfile2"
-     exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add `dependent.h:' lines.
-    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
-  else
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile" "$tmpdepfile2"
-  ;;
-
 tru64)
    # The Tru64 compiler uses -MD to generate dependencies as a side
    # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
@@ -342,13 +288,13 @@
 
    if test "$libtool" = yes; then
       # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
+      # static library.  This mecanism is used in libtool 1.4 series to
       # handle both shared and static libraries in a single compilation.
       # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
       #
       # With libtool 1.5 this exception was removed, and libtool now
       # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
+      # compilations output dependencies in in $dir.libs/$base.o.d and
       # in $dir$base.o.d.  We have to check for both files, because
       # one of the two compilations can be disabled.  We should prefer
       # $dir$base.o.d over $dir.libs/$base.o.d because the latter is




Index: config.sub
===================================================================
RCS file: /cvs/dirsec/ldapserver/config.sub,v
retrieving revision 1.35
retrieving revision 1.36
diff -u -r1.35 -r1.36
--- config.sub	8 Aug 2007 22:31:55 -0000	1.35
+++ config.sub	9 Aug 2007 00:10:32 -0000	1.36
@@ -1,10 +1,9 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-#   Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2006-09-20'
+timestamp='2005-07-08'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -120,9 +119,8 @@
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
-  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
-  storm-chaos* | os2-emx* | rtmk-nova*)
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
+  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -173,10 +171,6 @@
 	-hiux*)
 		os=-hiuxwe2
 		;;
-	-sco6)
-		os=-sco5v6
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
 	-sco5)
 		os=-sco3.2v5
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -193,10 +187,6 @@
 		# Don't forget version if it is 3.2v4 or newer.
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
-	-sco5v6*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
 	-sco*)
 		os=-sco3.2v2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -241,7 +231,7 @@
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
 	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
@@ -249,8 +239,7 @@
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore \
+	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -268,27 +257,28 @@
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
-	| mt \
+	| ms1 \
 	| msp430 \
-	| nios | nios2 \
 	| ns16k | ns32k \
 	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| score \
-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
-	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-	| spu | strongarm \
+	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b \
+	| strongarm \
 	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
+	m32c)
+		basic_machine=$basic_machine-unknown
+		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
 		# Motorola 68HC11/12.
 		basic_machine=$basic_machine-unknown
@@ -296,9 +286,6 @@
 		;;
 	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
 		;;
-	ms1)
-		basic_machine=mt-unknown
-		;;
 
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
@@ -318,7 +305,7 @@
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* | avr32-* \
+	| avr-* \
 	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
 	| clipper-* | craynv-* | cydra-* \
@@ -329,7 +316,7 @@
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| m32c-* | m32r-* | m32rle-* \
+	| m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
 	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
@@ -349,30 +336,31 @@
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
-	| mt-* \
+	| ms1-* \
 	| msp430-* \
-	| nios-* | nios2-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
 	| xstormy16-* | xtensa-* \
 	| ymp-* \
 	| z8k-*)
 		;;
+	m32c-*)
+		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
 	386bsd)
@@ -708,9 +696,6 @@
 		basic_machine=i386-pc
 		os=-msdos
 		;;
-	ms1-*)
-		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
-		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
@@ -818,12 +803,6 @@
 	pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
-	pc98)
-		basic_machine=i386-pc
-		;;
-	pc98-*)
-		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
 	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
@@ -880,10 +859,6 @@
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
-	rdos)
-		basic_machine=i386-pc
-		os=-rdos
-		;;
 	rom68k)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -910,10 +885,6 @@
 	sb1el)
 		basic_machine=mipsisa64sb1el-unknown
 		;;
-	sde)
-		basic_machine=mipsisa32-sde
-		os=-elf
-		;;
 	sei)
 		basic_machine=mips-sei
 		os=-seiux
@@ -1130,7 +1101,7 @@
 	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+	sparc | sparcv8 | sparcv9 | sparcv9b)
 		basic_machine=sparc-sun
 		;;
 	cydra)
@@ -1203,23 +1174,21 @@
 	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -openbsd* | -solidbsd* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
-	      | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers*)
+	      | -skyos* | -haiku*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1371,12 +1340,6 @@
 # system, and we'll never get to this point.
 
 case $basic_machine in
-        score-*)
-		os=-elf
-		;;
-        spu-*)
-		os=-elf
-		;;
 	*-acorn)
 		os=-riscix1.2
 		;;
@@ -1386,9 +1349,9 @@
 	arm*-semi)
 		os=-aout
 		;;
-        c4x-* | tic4x-*)
-        	os=-coff
-		;;
+    c4x-* | tic4x-*)
+        os=-coff
+        ;;
 	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20


Index: config.guess
===================================================================
RCS file: /cvs/dirsec/ldapserver/config.guess,v
retrieving revision 1.35
retrieving revision 1.36
diff -u -r1.35 -r1.36
--- config.guess	8 Aug 2007 22:31:55 -0000	1.35
+++ config.guess	9 Aug 2007 00:10:32 -0000	1.36
@@ -1,10 +1,9 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-#   Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2006-07-02'
+timestamp='2005-07-08'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -107,7 +106,7 @@
 trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
 trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
 : ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
  { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
  { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
  { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
@@ -207,11 +206,8 @@
     *:ekkoBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
 	exit ;;
-    *:SolidBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
-	exit ;;
     macppc:MirBSD:*:*)
-	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
 	exit ;;
     *:MirBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
@@ -768,14 +764,7 @@
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit ;;
     *:FreeBSD:*:*)
-	case ${UNAME_MACHINE} in
-	    pc98)
-		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    amd64)
-		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    *)
-		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	esac
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
 	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
@@ -790,11 +779,8 @@
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
 	exit ;;
-    x86:Interix*:[3456]*)
-	echo i586-pc-interix${UNAME_RELEASE}
-	exit ;;
-    EM64T:Interix*:[3456]*)
-	echo x86_64-unknown-interix${UNAME_RELEASE}
+    x86:Interix*:[34]*)
+	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
 	exit ;;
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
@@ -808,7 +794,7 @@
     i*:UWIN*:*)
 	echo ${UNAME_MACHINE}-pc-uwin
 	exit ;;
-    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+    amd64:CYGWIN*:*:*)
 	echo x86_64-unknown-cygwin
 	exit ;;
     p*:CYGWIN*:*)
@@ -831,9 +817,6 @@
     arm*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
-    avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
     cris:Linux:*:*)
 	echo cris-axis-linux-gnu
 	exit ;;
@@ -868,11 +851,7 @@
 	#endif
 	#endif
 EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     mips64:Linux:*:*)
@@ -891,16 +870,9 @@
 	#endif
 	#endif
 EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
-    or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
-	exit ;;
     ppc:Linux:*:*)
 	echo powerpc-unknown-linux-gnu
 	exit ;;
@@ -944,9 +916,6 @@
     sparc:Linux:*:* | sparc64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
-    vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
-	exit ;;
     x86_64:Linux:*:*)
 	echo x86_64-unknown-linux-gnu
 	exit ;;
@@ -992,7 +961,7 @@
 	LIBC=gnulibc1
 	# endif
 	#else
-	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+	#ifdef __INTEL_COMPILER
 	LIBC=gnu
 	#else
 	LIBC=gnuaout
@@ -1002,11 +971,7 @@
 	LIBC=dietlibc
 	#endif
 EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^LIBC/{
-		s: ::g
-		p
-	    }'`"
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
 	test x"${LIBC}" != x && {
 		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
 		exit
@@ -1217,6 +1182,7 @@
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
 	case $UNAME_PROCESSOR in
+	    *86) UNAME_PROCESSOR=i686 ;;
 	    unknown) UNAME_PROCESSOR=powerpc ;;
 	esac
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
@@ -1295,9 +1261,6 @@
     i*86:skyos:*:*)
 	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
 	exit ;;
-    i*86:rdos:*:*)
-	echo ${UNAME_MACHINE}-pc-rdos
-	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2


View full diff with command:
/usr/bin/cvs -f diff  -kk -u -N -r 1.64 -r 1.65 Makefile.in
Index: Makefile.in
===================================================================
RCS file: /cvs/dirsec/ldapserver/Makefile.in,v
retrieving revision 1.64
retrieving revision 1.65
diff -u -r1.64 -r1.65
--- Makefile.in	8 Aug 2007 22:31:54 -0000	1.64
+++ Makefile.in	9 Aug 2007 00:10:32 -0000	1.65
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+# 2003, 2004, 2005  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -18,11 +18,15 @@
 
 
 
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -43,11 +47,11 @@
 	pwdhash-bin$(EXEEXT) rsearch-bin$(EXEEXT)
 noinst_PROGRAMS = makstrdb$(EXEEXT)
 @SOLARIS_TRUE am__append_1 = ldap/servers/slapd/tools/ldclt/opCheck.c
-subdir = .
 DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
 	$(top_srcdir)/configure compile config.guess config.sub \
 	depcomp install-sh ltmain.sh missing
+subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/fhs.m4 $(top_srcdir)/m4/nspr.m4 \
 	$(top_srcdir)/m4/nss.m4 $(top_srcdir)/m4/mozldap.m4 \
@@ -57,7 +61,7 @@
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
+ configure.lineno configure.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
@@ -121,9 +125,6 @@
 	ldap/servers/plugins/shared/libattr_unique_plugin_la-utils.lo
 libattr_unique_plugin_la_OBJECTS =  \
 	$(am_libattr_unique_plugin_la_OBJECTS)
-libattr_unique_plugin_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libattr_unique_plugin_la_LDFLAGS) $(LDFLAGS) -o $@
 libback_ldbm_la_DEPENDENCIES = libslapd.la $(am__DEPENDENCIES_1)
 am_libback_ldbm_la_OBJECTS =  \
 	ldap/servers/slapd/back-ldbm/libback_ldbm_la-ancestorid.lo \
@@ -185,16 +186,10 @@
 	ldap/servers/slapd/back-ldbm/libback_ldbm_la-vlv_key.lo \
 	ldap/servers/slapd/back-ldbm/libback_ldbm_la-vlv_srch.lo
 libback_ldbm_la_OBJECTS = $(am_libback_ldbm_la_OBJECTS)
-libback_ldbm_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libback_ldbm_la_LDFLAGS) $(LDFLAGS) -o $@
 libbitwise_plugin_la_LIBADD =
 am_libbitwise_plugin_la_OBJECTS =  \
 	ldap/servers/plugins/bitwise/libbitwise_plugin_la-bitwise.lo
 libbitwise_plugin_la_OBJECTS = $(am_libbitwise_plugin_la_OBJECTS)
-libbitwise_plugin_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libbitwise_plugin_la_LDFLAGS) $(LDFLAGS) -o $@
 @enable_bitwise_TRUE am_libbitwise_plugin_la_rpath = -rpath \
 @enable_bitwise_TRUE@	$(serverplugindir)
 libchainingdb_plugin_la_LIBADD =
@@ -225,9 +220,6 @@
 	ldap/servers/plugins/chainingdb/libchainingdb_plugin_la-cb_utils.lo
 libchainingdb_plugin_la_OBJECTS =  \
 	$(am_libchainingdb_plugin_la_OBJECTS)
-libchainingdb_plugin_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libchainingdb_plugin_la_LDFLAGS) $(LDFLAGS) -o $@
 libcollation_plugin_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
 am_libcollation_plugin_la_OBJECTS = ldap/servers/plugins/collation/libcollation_plugin_la-collate.lo \
@@ -239,40 +231,25 @@
 	ldap/servers/plugins/cos/libcos_plugin_la-cos.lo \
 	ldap/servers/plugins/cos/libcos_plugin_la-cos_cache.lo
 libcos_plugin_la_OBJECTS = $(am_libcos_plugin_la_OBJECTS)
-libcos_plugin_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libcos_plugin_la_LDFLAGS) $(LDFLAGS) -o $@
 libdes_plugin_la_LIBADD =
 am_libdes_plugin_la_OBJECTS =  \
 	ldap/servers/plugins/rever/libdes_plugin_la-des.lo \
 	ldap/servers/plugins/rever/libdes_plugin_la-rever.lo
 libdes_plugin_la_OBJECTS = $(am_libdes_plugin_la_OBJECTS)
-libdes_plugin_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libdes_plugin_la_LDFLAGS) $(LDFLAGS) -o $@
 libdistrib_plugin_la_LIBADD =
 am_libdistrib_plugin_la_OBJECTS =  \
 	ldap/servers/plugins/distrib/libdistrib_plugin_la-distrib.lo
 libdistrib_plugin_la_OBJECTS = $(am_libdistrib_plugin_la_OBJECTS)
-libdistrib_plugin_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libdistrib_plugin_la_LDFLAGS) $(LDFLAGS) -o $@
 libdna_plugin_la_LIBADD =
 am_libdna_plugin_la_OBJECTS =  \
 	ldap/servers/plugins/dna/libdna_plugin_la-dna.lo
 libdna_plugin_la_OBJECTS = $(am_libdna_plugin_la_OBJECTS)
-libdna_plugin_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libdna_plugin_la_LDFLAGS) $(LDFLAGS) -o $@
 @enable_dna_TRUE am_libdna_plugin_la_rpath = -rpath $(serverplugindir)
 libhttp_client_plugin_la_LIBADD =
 am_libhttp_client_plugin_la_OBJECTS = ldap/servers/plugins/http/libhttp_client_plugin_la-http_client.lo \
 	ldap/servers/plugins/http/libhttp_client_plugin_la-http_impl.lo
 libhttp_client_plugin_la_OBJECTS =  \
 	$(am_libhttp_client_plugin_la_OBJECTS)
-libhttp_client_plugin_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libhttp_client_plugin_la_LDFLAGS) $(LDFLAGS) -o $@
 libns_dshttpd_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1)
@@ -345,10 +322,6 @@
 	ldap/servers/plugins/pam_passthru/libpam_passthru_plugin_la-pam_ptpreop.lo
 libpam_passthru_plugin_la_OBJECTS =  \
 	$(am_libpam_passthru_plugin_la_OBJECTS)
-libpam_passthru_plugin_la_LINK = $(LIBTOOL) --tag=CC \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
-	$(AM_CFLAGS) $(CFLAGS) $(libpam_passthru_plugin_la_LDFLAGS) \
-	$(LDFLAGS) -o $@
 @enable_pam_passthru_TRUE am_libpam_passthru_plugin_la_rpath = -rpath \
 @enable_pam_passthru_TRUE@	$(serverplugindir)
 libpassthru_plugin_la_LIBADD =
@@ -360,15 +333,9 @@
 	ldap/servers/plugins/passthru/libpassthru_plugin_la-ptpreop.lo \
 	ldap/servers/plugins/passthru/libpassthru_plugin_la-ptutil.lo
 libpassthru_plugin_la_OBJECTS = $(am_libpassthru_plugin_la_OBJECTS)
-libpassthru_plugin_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libpassthru_plugin_la_LDFLAGS) $(LDFLAGS) -o $@
 libpresence_plugin_la_LIBADD =
 am_libpresence_plugin_la_OBJECTS = ldap/servers/plugins/presence/libpresence_plugin_la-presence.lo
 libpresence_plugin_la_OBJECTS = $(am_libpresence_plugin_la_OBJECTS)
-libpresence_plugin_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libpresence_plugin_la_LDFLAGS) $(LDFLAGS) -o $@
 libpwdstorage_plugin_la_LIBADD =
 am_libpwdstorage_plugin_la_OBJECTS = ldap/servers/plugins/pwdstorage/libpwdstorage_plugin_la-clear_pwd.lo \
 	ldap/servers/plugins/pwdstorage/libpwdstorage_plugin_la-crypt_pwd.lo \
@@ -380,15 +347,9 @@
 	ldap/servers/plugins/pwdstorage/libpwdstorage_plugin_la-ssha_pwd.lo
 libpwdstorage_plugin_la_OBJECTS =  \
 	$(am_libpwdstorage_plugin_la_OBJECTS)
-libpwdstorage_plugin_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libpwdstorage_plugin_la_LDFLAGS) $(LDFLAGS) -o $@
 libreferint_plugin_la_LIBADD =
 am_libreferint_plugin_la_OBJECTS = ldap/servers/plugins/referint/libreferint_plugin_la-referint.lo
 libreferint_plugin_la_OBJECTS = $(am_libreferint_plugin_la_OBJECTS)
-libreferint_plugin_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libreferint_plugin_la_LDFLAGS) $(LDFLAGS) -o $@
 libreplication_plugin_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1)
 am_libreplication_plugin_la_OBJECTS = ldap/servers/plugins/replication/libreplication_plugin_la-cl5_api.lo \
@@ -447,9 +408,6 @@
 	ldap/servers/plugins/replication/libreplication_plugin_la-windows_tot_protocol.lo
 libreplication_plugin_la_OBJECTS =  \
 	$(am_libreplication_plugin_la_OBJECTS)
-libreplication_plugin_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libreplication_plugin_la_LDFLAGS) $(LDFLAGS) -o $@
 libretrocl_plugin_la_LIBADD =
 am_libretrocl_plugin_la_OBJECTS =  \
 	ldap/servers/plugins/retrocl/libretrocl_plugin_la-retrocl.lo \
@@ -459,17 +417,11 @@
 	ldap/servers/plugins/retrocl/libretrocl_plugin_la-retrocl_rootdse.lo \
 	ldap/servers/plugins/retrocl/libretrocl_plugin_la-retrocl_trim.lo
 libretrocl_plugin_la_OBJECTS = $(am_libretrocl_plugin_la_OBJECTS)
-libretrocl_plugin_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libretrocl_plugin_la_LDFLAGS) $(LDFLAGS) -o $@
 libroles_plugin_la_LIBADD =
 am_libroles_plugin_la_OBJECTS =  \
 	ldap/servers/plugins/roles/libroles_plugin_la-roles_cache.lo \
 	ldap/servers/plugins/roles/libroles_plugin_la-roles_plugin.lo
 libroles_plugin_la_OBJECTS = $(am_libroles_plugin_la_OBJECTS)
[...5805 lines suppressed...]
 distclean-libtool:
 	-rm -f libtool
+uninstall-info-am:
 install-configDATA: $(config_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(configdir)" || $(MKDIR_P) "$(DESTDIR)$(configdir)"
+	test -z "$(configdir)" || $(mkdir_p) "$(DESTDIR)$(configdir)"
 	@list='$(config_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(am__strip_dir) \
@@ -8640,7 +8591,7 @@
 	done
 install-infDATA: $(inf_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(infdir)" || $(MKDIR_P) "$(DESTDIR)$(infdir)"
+	test -z "$(infdir)" || $(mkdir_p) "$(DESTDIR)$(infdir)"
 	@list='$(inf_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(am__strip_dir) \
@@ -8657,7 +8608,7 @@
 	done
 install-nodist_propertyDATA: $(nodist_property_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(propertydir)" || $(MKDIR_P) "$(DESTDIR)$(propertydir)"
+	test -z "$(propertydir)" || $(mkdir_p) "$(DESTDIR)$(propertydir)"
 	@list='$(nodist_property_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(am__strip_dir) \
@@ -8674,7 +8625,7 @@
 	done
 install-propertyDATA: $(property_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(propertydir)" || $(MKDIR_P) "$(DESTDIR)$(propertydir)"
+	test -z "$(propertydir)" || $(mkdir_p) "$(DESTDIR)$(propertydir)"
 	@list='$(property_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(am__strip_dir) \
@@ -8691,7 +8642,7 @@
 	done
 install-sampledataDATA: $(sampledata_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(sampledatadir)" || $(MKDIR_P) "$(DESTDIR)$(sampledatadir)"
+	test -z "$(sampledatadir)" || $(mkdir_p) "$(DESTDIR)$(sampledatadir)"
 	@list='$(sampledata_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(am__strip_dir) \
@@ -8708,7 +8659,7 @@
 	done
 install-schemaDATA: $(schema_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(schemadir)" || $(MKDIR_P) "$(DESTDIR)$(schemadir)"
+	test -z "$(schemadir)" || $(mkdir_p) "$(DESTDIR)$(schemadir)"
 	@list='$(schema_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(am__strip_dir) \
@@ -8774,22 +8725,24 @@
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	test -d $(distdir) || mkdir $(distdir)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
+	mkdir $(distdir)
+	$(mkdir_p) $(distdir)/m4
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
 	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 	    fi; \
@@ -8803,7 +8756,7 @@
 	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r $(distdir)
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
@@ -8878,7 +8831,7 @@
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
 distuninstallcheck:
 	@cd $(distuninstallcheck_dir) \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
@@ -8904,7 +8857,7 @@
 		$(DATA) config.h
 installdirs:
 	for dir in "$(DESTDIR)$(serverdir)" "$(DESTDIR)$(serverplugindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(initdir)" "$(DESTDIR)$(perldir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(taskdir)" "$(DESTDIR)$(configdir)" "$(DESTDIR)$(infdir)" "$(DESTDIR)$(propertydir)" "$(DESTDIR)$(propertydir)" "$(DESTDIR)$(sampledatadir)" "$(DESTDIR)$(schemadir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
 	done
 install: $(BUILT_SOURCES)
 	$(MAKE) $(AM_MAKEFLAGS) install-am
@@ -9034,21 +8987,13 @@
 	install-serverLTLIBRARIES install-serverpluginLTLIBRARIES \
 	install-taskSCRIPTS
 
-install-dvi: install-dvi-am
-
 install-exec-am: install-binPROGRAMS install-binSCRIPTS \
 	install-sbinPROGRAMS install-sbinSCRIPTS
 
-install-html: install-html-am
-
 install-info: install-info-am
 
 install-man:
 
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -9072,14 +9017,13 @@
 ps-am:
 
 uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
-	uninstall-configDATA uninstall-infDATA uninstall-initSCRIPTS \
-	uninstall-nodist_propertyDATA uninstall-perlSCRIPTS \
-	uninstall-propertyDATA uninstall-sampledataDATA \
-	uninstall-sbinPROGRAMS uninstall-sbinSCRIPTS \
-	uninstall-schemaDATA uninstall-serverLTLIBRARIES \
-	uninstall-serverpluginLTLIBRARIES uninstall-taskSCRIPTS
-
-.MAKE: install-am install-strip
+	uninstall-configDATA uninstall-infDATA uninstall-info-am \
+	uninstall-initSCRIPTS uninstall-nodist_propertyDATA \
+	uninstall-perlSCRIPTS uninstall-propertyDATA \
+	uninstall-sampledataDATA uninstall-sbinPROGRAMS \
+	uninstall-sbinSCRIPTS uninstall-schemaDATA \
+	uninstall-serverLTLIBRARIES uninstall-serverpluginLTLIBRARIES \
+	uninstall-taskSCRIPTS
 
 .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
 	clean-binPROGRAMS clean-generic clean-libtool \
@@ -9091,12 +9035,10 @@
 	distclean-tags distcleancheck distdir distuninstallcheck dvi \
 	dvi-am html html-am info info-am install install-am \
 	install-binPROGRAMS install-binSCRIPTS install-configDATA \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
+	install-data install-data-am install-exec install-exec-am \
 	install-infDATA install-info install-info-am \
 	install-initSCRIPTS install-man install-nodist_propertyDATA \
-	install-pdf install-pdf-am install-perlSCRIPTS \
-	install-propertyDATA install-ps install-ps-am \
+	install-perlSCRIPTS install-propertyDATA \
 	install-sampledataDATA install-sbinPROGRAMS \
 	install-sbinSCRIPTS install-schemaDATA \
 	install-serverLTLIBRARIES install-serverpluginLTLIBRARIES \
@@ -9105,12 +9047,13 @@
 	mostlyclean mostlyclean-compile mostlyclean-generic \
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am uninstall-binPROGRAMS uninstall-binSCRIPTS \
-	uninstall-configDATA uninstall-infDATA uninstall-initSCRIPTS \
-	uninstall-nodist_propertyDATA uninstall-perlSCRIPTS \
-	uninstall-propertyDATA uninstall-sampledataDATA \
-	uninstall-sbinPROGRAMS uninstall-sbinSCRIPTS \
-	uninstall-schemaDATA uninstall-serverLTLIBRARIES \
-	uninstall-serverpluginLTLIBRARIES uninstall-taskSCRIPTS
+	uninstall-configDATA uninstall-infDATA uninstall-info-am \
+	uninstall-initSCRIPTS uninstall-nodist_propertyDATA \
+	uninstall-perlSCRIPTS uninstall-propertyDATA \
+	uninstall-sampledataDATA uninstall-sbinPROGRAMS \
+	uninstall-sbinSCRIPTS uninstall-schemaDATA \
+	uninstall-serverLTLIBRARIES uninstall-serverpluginLTLIBRARIES \
+	uninstall-taskSCRIPTS
 
 
 dirver.h: Makefile


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]