[Fedora-directory-users] FC3 - Back to cyrus-sasl
Rob Crittenden
rcritten at redhat.com
Thu Sep 29 12:55:12 UTC 2005
Your configure options are wrong, I'm surprised it didn't complain about it.
You don't have a space between the directory in --enable-gssapi and
--enable-static.
Do a: gmake distclean in the cyrus-sasl directory and re-do the
configure and make again.
rob
Richard Megginson wrote:
> There is still no libsasl2.a. I'm not sure what the problem is. Try
> using "make" instead of "gmake" - perhaps gmake is slightly different on
> your OS/version?
>
> Jason Kullo Sam wrote:
>
>> Ok...guess I have to get this build going after all. Getting halfway
>> through the make, then failing with the following error. Doh!
>>
>> Attacked the cyrus install again. Did a make clean, then changed my
>> mind and deleted entire folder and started all over with it. For some
>> reason, the sasl make seemed to go this time(maybe I just needed to
>> blow the folder out last time)...but, the make on ldapserver still
>> failed. See below for log(snipped out bits of spam...) On the bright
>> side...I'm actually learning lots! =D
>> ====================================================================
>> [root at genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf -
>> tar: Read 2048 bytes from -
>> [root at genie ds]# cd cyrus-sasl-2.1.20
>> [root at genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure
>> --enable-gssapi=/usr/kerberos/include/--enable-static --without-des
>> --without-openssl
>> configure: creating cache ./config.cache
>> checking build system type... i686-pc-linux-gnu
>> checking host system type... i686-pc-linux-gnu
>> checking target system type... i686-pc-linux-gnu
>> -------------------- SNIP Successful Config
>> updating cache .././config.cache
>> configure: creating ./config.status
>> config.status: creating Makefile
>> config.status: creating saslauthd.h
>> config.status: executing depfiles commands
>> Configuration Complete. Type 'make' to build.
>> [root at genie cyrus-sasl-2.1.20]#
>> ##########################
>> Onto the make...
>> ##########################
>>
>> Configuration Complete. Type 'make' to build.
>> [root at genie cyrus-sasl-2.1.20]# gmake
>> gmake all-recursive
>> gmake[1]: Entering directory
>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
>> Making all in include
>> gmake[2]: Entering directory
>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
>> if gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -W -O2 -MT makemd5.o -MD
>> -MP -MF ".deps/makemd5.Tpo" \
>> -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \
>> then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \
>> else rm -f ".deps/makemd5.Tpo"; exit 1; \
>> fi
>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o makemd5
>> makemd5.o -lresolv
>> mkdir .libs
>>
>> ------------------- SNIP Make spam ----------------------------
>>
>> if gcc -DHAVE_CONFIG_H
>> -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I.
>> -I. -I.. -I. -I. -I. -I./include -I./include -I./../include -O2 -MT
>> saslauthd-main.o -MD -MP -MF ".deps/saslauthd-main.Tpo" \
>> -c -o saslauthd-main.o `test -f 'saslauthd-main.c' || echo
>> './'`saslauthd-main.c; \
>> then mv ".deps/saslauthd-main.Tpo" ".deps/saslauthd-main.Po"; \
>> else rm -f ".deps/saslauthd-main.Tpo"; exit 1; \
>> fi
>> if gcc -DHAVE_CONFIG_H
>> -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I.
>> -I. -I.. -I. -I. -I. -I./include -I./include -I./../include -O2 -MT
>> md5.o -MD -MP -MF ".deps/md5.Tpo" \
>> -c -o md5.o `test -f 'md5.c' || echo './'`md5.c; \
>> then mv ".deps/md5.Tpo" ".deps/md5.Po"; \
>> else rm -f ".deps/md5.Tpo"; exit 1; \
>> fi
>> gcc -O2 -o saslauthd mechanisms.o auth_dce.o auth_getpwent.o
>> auth_krb5.o auth_krb4.o auth_pam.o auth_rimap.o auth_shadow.o
>> auth_sia.o auth_sasldb.o lak.o auth_ldap.o cache.o utils.o ipc_unix.o
>> ipc_doors.o saslauthd-main.o md5.o -lcrypt -lresolv -lresolv
>> gmake[3]: Leaving directory
>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd'
>> gmake[2]: Leaving directory
>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd'
>> gmake[2]: Entering directory
>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
>> gmake[2]: Leaving directory
>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
>> gmake[1]: Leaving directory
>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
>> [root at genie cyrus-sasl-2.1.20]#
>> #######################################
>> Seems to have compiled right that time for some reason...weird...
>> #######################################
>>
>> [root at genie cyrus-sasl-2.1.20]# cd ..
>> [root at genie ds]# ls
>> 09.23 icu-2.4.tgz
>> 09.27 ldapserver
>> cyrus-sasl-2.1.20 mozilla
>> cyrus-sasl-2.1.20.tar.gz mozilla-components.tar.gz
>> db-4.2.52.NC net-snmp-5.2.1
>> db-4.2.52.NC.tar.gz net-snmp-5.2.1.tar.gz
>> fedora-adminutil-devel-7.1 patch.4.2.52.1
>> fedora-adminutil-devel-7.1.tar.gz patch.4.2.52.2
>> fedora-setuputil-devel-7.1 patch.4.2.52.3
>> fedora-setuputil-devel-7.1.tar.gz patch.4.2.52.4
>> icu
>> [root at genie ds]# cd ldapserver/
>> [root at genie ldapserver]# gmake USE_PERL_FROM_PATH=1
>> BUILD_DEBUG=optimize if test ! -d Linux; then mkdir Linux; fi;
>> /usr/bin/perl buildnum.pl -p Linux
>> NSOS_RELEASE is: 2.6
>> /usr/bin/perl pumpkin.pl 120 pumpkin.dat
>> The components are up to date
>>
>>
>> ==== Starting LDAP Server ==========
>>
>> gmake BUILD_OPT=1 NO_JAVA=1 nsCommon
>> gmake[1]: Entering directory `/root/Desktop/dsbuild-static/ds/ldapserver'
>>
>> -------------------------- SNIP Make Spam
>>
>> .o
>> ../../../built/Linux-domestic-optimize-normal-slapd/servers/obj/main.o
>> -L../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server
>> -lslapd -lldapu
>> -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lssl3
>> -lnss3 -lsoftokn3 -L../../../../mozilla/dist/lib -lssldap50 -lldap50
>> -lprldap50
>> -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lplc4
>> -lplds4 -lnspr4
>> -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -ldbm
>> -lavl -lldif -llitekey -ldl
>> -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib
>> -lsvrcore -L../../../../cyrus-sasl-2.1.20/lib -lsasl2
>> -L/usr/kerberos/lib -lgssapi_krb5 -lcrypt -lpthread
>> -L../../../../db-4.2.52.NC/built/.libs -ldb-4.2
>> /usr/bin/ld: cannot find -lsasl2
>> collect2: ld returned 1 exit status
>> gmake[3]: ***
>> [../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server/ns-slapd]
>> Error 1
>> gmake[3]: Leaving directory
>> `/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers/slapd'
>> gmake[2]: *** [_slapd] Error 2
>> gmake[2]: Leaving directory
>> `/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers'
>> gmake[1]: *** [ldapprogs] Error 2
>> gmake[1]: Leaving directory
>> `/root/Desktop/dsbuild-static/ds/ldapserver/ldap'
>> gmake: *** [buildDirectory] Error 2
>> [root at genie ldapserver]# ls ../cyrus-sasl-2.1.20/lib
>> auxprop.c client.lo dlopen.o Makefile.in saslutil.o
>> auxprop.lo client.o external.c md5.c server.c
>> auxprop.o common.c external.lo md5.lo server.lo
>> canonusr.c common.lo external.o md5.o server.o
>> canonusr.lo common.o getaddrinfo.c NTMakefile seterror.c
>> canonusr.o config.c getnameinfo.c plugin_common.lo seterror.lo
>> checkpw.c config.lo getsubopt.c plugin_common.o seterror.o
>> checkpw.lo config.o libsasl2.la saslint.h snprintf.c
>> checkpw.o dlopen.c Makefile saslutil.c staticopen.h
>> client.c dlopen.lo Makefile.am saslutil.lo windlopen.c
>> [root at genie ldapserver]# --
>> Fedora-directory-users mailing list
>> Fedora-directory-users at redhat.com
>> https://www.redhat.com/mailman/listinfo/fedora-directory-users
>
>
>
> ------------------------------------------------------------------------
>
> --
> Fedora-directory-users mailing list
> Fedora-directory-users at redhat.com
> https://www.redhat.com/mailman/listinfo/fedora-directory-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3178 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://listman.redhat.com/archives/fedora-directory-users/attachments/20050929/5d8e1719/attachment.bin>
More information about the Fedora-directory-users
mailing list