rpms/tinyproxy/EL-5 tinyproxy.conf, NONE, 1.1 tinyproxy.init, NONE, 1.1 tinyproxy.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2
Jeremy Hinegardner (jjh)
fedora-extras-commits at redhat.com
Fri Apr 25 02:25:58 UTC 2008
- Previous message (by thread): rpms/tinyproxy/EL-4 tinyproxy.conf, NONE, 1.1 tinyproxy.init, NONE, 1.1 tinyproxy.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2
- Next message (by thread): rpms/jruby/devel jruby-add-classpath-for-tests.patch, NONE, 1.1 jruby-dont-include-dependencies-in-jar.patch, NONE, 1.1 jruby-fix-jruby-start-script.patch, NONE, 1.1 jruby-remove-retroweaver-task.patch, NONE, 1.1 jruby.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Author: jjh
Update of /cvs/pkgs/rpms/tinyproxy/EL-5
In directory cvs-int.fedora.redhat.com:/tmp/cvs-serv28629
Modified Files:
.cvsignore sources
Added Files:
tinyproxy.conf tinyproxy.init tinyproxy.spec
Log Message:
initial import
--- NEW FILE tinyproxy.conf ---
##
## tinyproxy.conf -- tinyproxy daemon configuration file
##
#
# Name of the user the tinyproxy daemon should switch to after the port
# has been bound.
#
User nobody
Group nobody
#
# Port to listen on.
#
Port 8888
#
# If you have multiple interfaces this allows you to bind to only one. If
# this is commented out, tinyproxy will bind to all interfaces present.
#
#Listen 192.168.0.1
#
# The Bind directive allows you to bind the outgoing connections to a
# particular IP address.
#
#Bind 192.168.0.1
#
# Timeout: The number of seconds of inactivity a connection is allowed to
# have before it closed by tinyproxy.
#
Timeout 600
#
# ErrorFile: Defines the HTML file to send when a given HTTP error
# occurs. You will probably need to customize the location to your
# particular install. The usual locations to check are:
# /usr/local/share/tinyproxy
# /usr/share/tinyproxy
# /etc/tinyproxy
#
# ErrorFile 404 "/usr/share/tinyproxy/404.html"
# ErrorFile 400 "/usr/share/tinyproxy/400.html"
# ErrorFile 503 "/usr/share/tinyproxy/503.html"
# ErrorFile 403 "/usr/share/tinyproxy/403.html"
# ErrorFile 408 "/usr/share/tinyproxy/408.html"
#
# DefaultErrorFile: The HTML file that gets sent if there is no
# HTML file defined with an ErrorFile keyword for the HTTP error
# that has occured.
#
DefaultErrorFile "/usr/share/tinyproxy/default.html"
#
# StatFile: The HTML file that gets sent when a request is made
# for the stathost. If this file doesn't exist a basic page is
# hardcoded in tinyproxy.
#
StatFile "/usr/share/tinyproxy/stats.html"
#
# Where to log the information. Either LogFile or Syslog should be set,
# but not both.
#
Logfile "/var/log/tinyproxy.log"
# Syslog On
#
# Set the logging level. Allowed settings are:
# Critical (least verbose)
# Error
# Warning
# Notice
# Connect (to log connections without Info's noise)
# Info (most verbose)
# The LogLevel logs from the set level and above. For example, if the LogLevel
# was set to Warning, than all log messages from Warning to Critical would be
# output, but Notice and below would be suppressed.
#
LogLevel Info
#
# PidFile: Write the PID of the main tinyproxy thread to this file so it
# can be used for signalling purposes.
#
PidFile "/var/run/tinyproxy.pid"
#
# Include the X-Tinyproxy header, which has the client's IP address when
# connecting to the sites listed.
#
#XTinyproxy mydomain.com
#
# Turns on upstream proxy support.
#
# The upstream rules allow you to selectively route upstream connections
# based on the host/domain of the site being accessed.
#
# For example:
# # connection to test domain goes through testproxy
# upstream testproxy:8008 ".test.domain.invalid"
# upstream testproxy:8008 ".our_testbed.example.com"
# upstream testproxy:8008 "192.168.128.0/255.255.254.0"
#
# # no upstream proxy for internal websites and unqualified hosts
# no upstream ".internal.example.com"
# no upstream "www.example.com"
# no upstream "10.0.0.0/8"
# no upstream "192.168.0.0/255.255.254.0"
# no upstream "."
#
# # connection to these boxes go through their DMZ firewalls
# upstream cust1_firewall:8008 "testbed_for_cust1"
# upstream cust2_firewall:8008 "testbed_for_cust2"
#
# # default upstream is internet firewall
# upstream firewall.internal.example.com:80
#
# The LAST matching rule wins the route decision. As you can see, you
# can use a host, or a domain:
# name matches host exactly
# .name matches any host in domain "name"
# . matches any host with no domain (in 'empty' domain)
# IP/bits matches network/mask
# IP/mask matches network/mask
#
#Upstream some.remote.proxy:port
#
# This is the absolute highest number of threads which will be created. In
# other words, only MaxClients number of clients can be connected at the
# same time.
#
MaxClients 100
#
# These settings set the upper and lower limit for the number of
# spare servers which should be available. If the number of spare servers
# falls below MinSpareServers then new ones will be created. If the number
# of servers exceeds MaxSpareServers then the extras will be killed off.
#
MinSpareServers 5
MaxSpareServers 20
#
# Number of servers to start initially.
#
StartServers 10
#
# MaxRequestsPerChild is the number of connections a thread will handle
# before it is killed. In practise this should be set to 0, which disables
# thread reaping. If you do notice problems with memory leakage, then set
# this to something like 10000
#
MaxRequestsPerChild 0
#
# The following is the authorization controls. If there are any access
# control keywords then the default action is to DENY. Otherwise, the
# default action is ALLOW.
#
# Also the order of the controls are important. The incoming connections
# are tested against the controls based on order.
#
Allow 127.0.0.1
# Allow 192.168.1.0/25
#
# The "Via" header is required by the HTTP RFC, but using the real host name
# is a security concern. If the following directive is enabled, the string
# supplied will be used as the host name in the Via header; otherwise, the
# server's host name will be used.
#
ViaProxyName "tinyproxy"
#
# The location of the filter file.
#
#Filter "/etc/tinyproxy/filter"
#
# Filter based on URLs rather than domains.
#
#FilterURLs On
#
# Use POSIX Extended regular expressions rather than basic.
#
#FilterExtended On
#
# Use case sensitive regular expressions.
#
#FilterCaseSensitive On
#
# Change the default policy of the filtering system. If this directive is
# commented out, or is set to "No" then the default policy is to allow
# everything which is not specifically denied by the filter file.
#
# However, by setting this directive to "Yes" the default policy becomes to
# deny everything which is _not_ specifically allowed by the filter file.
#
#FilterDefaultDeny Yes
#
# If an Anonymous keyword is present, then anonymous proxying is enabled.
# The headers listed are allowed through, while all others are denied. If
# no Anonymous keyword is present, then all header are allowed through.
# You must include quotes around the headers.
#
#Anonymous "Host"
#Anonymous "Authorization"
#
# This is a list of ports allowed by tinyproxy when the CONNECT method
# is used. To disable the CONNECT method altogether, set the value to 0.
# If no ConnectPort line is found, all ports are allowed (which is not
# very secure.)
#
# The following two ports are used by SSL.
#
ConnectPort 443
ConnectPort 563
--- NEW FILE tinyproxy.init ---
#!/bin/sh
#
# tinyproxy Startup script for the tinyproxy server
#
# chkconfig: - 85 15
# description: small, efficient HTTP/SSL proxy daemon
#
# processname: tinyproxy
# config: /etc/tinyproxy/tinyproxy.conf
# config: /etc/sysconfig/tinyproxy
# pidfile: /var/run/tinyproxy.pid
#
# Note: pidfile is created by tinyproxy in its config
# see PidFile in the configuration file.
# Source function library.
. /etc/rc.d/init.d/functions
# Source networking configuration.
. /etc/sysconfig/network
# Check that networking is up.
[ "$NETWORKING" = "no" ] && exit 0
exec="/usr/sbin/tinyproxy"
prog=$(basename $exec)
config="/etc/tinyproxy/tinyproxy.conf"
[ -e /etc/sysconfig/tinyproxy ] && . /etc/sysconfig/tinyproxy
lockfile=/var/lock/subsys/tinyproxy
start() {
[ -x $exec ] || exit 5
[ -f $config ] || exit 6
echo -n $"Starting $prog: "
daemon $exec -c $config
retval=$?
echo
[ $retval -eq 0 ] && touch $lockfile
return $retval
}
stop() {
echo -n $"Stopping $prog: "
# stop it here, often "killproc $prog"
killproc $prog
retval=$?
echo
[ $retval -eq 0 ] && rm -f $lockfile
return $retval
}
restart() {
stop
start
}
reload() {
restart
}
force_reload() {
restart
}
rh_status() {
status $prog
}
rh_status_q() {
rh_status >/dev/null 2>&1
}
case "$1" in
start)
rh_status_q && exit 0
$1
;;
stop)
rh_status_q || exit 0
$1
;;
restart)
$1
;;
reload)
rh_status_q || exit 7
$1
;;
force-reload)
force_reload
;;
status)
rh_status
;;
condrestart|try-restart)
rh_status_q || exit 0
restart
;;
*)
echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}"
exit 2
esac
exit $?
--- NEW FILE tinyproxy.spec ---
%define tinyproxy_confdir %{_sysconfdir}/tinyproxy
%define tinyproxy_datadir %{_datadir}/tinyproxy
Name: tinyproxy
Version: 1.6.3
Release: 2%{?dist}
Summary: A small, efficient HTTP/SSL proxy daemon
Group: System Environment/Daemons
License: GPLv2+
URL: https://projects.banu.com/tinyproxy/
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
Source0: http://downloads.sourceforge.net/%{name}/%{name}-%{version}.tar.gz
Source1: %{name}.init
Source2: %{name}.conf
Requires(post): chkconfig
Requires(preun): chkconfig
Requires(preun): initscripts
%description
tinyproxy is a small, efficient HTTP/SSL proxy daemon released under the
GNU General Public License (GPL). tinyproxy is very useful in a small
network setting, where a larger proxy like Squid would either be too
resource intensive, or a security risk.
%prep
%setup -q
%build
%configure --with-config=%{tinyproxy_confdir}/%{name}.conf
make %{?_smp_mflags}
%install
rm -rf %{buildroot}
make install-exec DESTDIR=%{buildroot}
# The default 'make install' installs too many items, so we trim it down
# and install manually
%{__install} -p -D -m 0755 %{SOURCE1} %{buildroot}%{_initrddir}/%{name}
%{__install} -p -D -m 0644 %{SOURCE2} %{buildroot}%{tinyproxy_confdir}/%{name}.conf
%{__install} -d -m 0755 %{buildroot}%{tinyproxy_datadir}
%{__install} -p -D -m 0644 ./doc/%{name}.8 %{buildroot}%{_mandir}/man8/%{name}.8
for htmlfile in $(find ./doc/ -type f -name '*.html')
do
%{__install} -p -m 0644 $htmlfile %{buildroot}%{tinyproxy_datadir}
done
%clean
rm -rf %{buildroot}
%post
/sbin/chkconfig --add %{name}
%preun
if [ $1 = 0 ]; then
/sbin/service %{name} stop >/dev/null 2>&1
/sbin/chkconfig --del %{name}
fi
%postun
if [ "$1" -ge "1" ]; then
/sbin/service %{name} condrestart > /dev/null 2>&1 || :
fi
%files
%defattr(-,root,root,-)
%doc AUTHORS COPYING README doc/*.txt
%{_sbindir}/%{name}
%{_mandir}/man8/%{name}.8.gz
%{_initrddir}/%{name}
%dir %{tinyproxy_datadir}
%dir %{tinyproxy_datadir}/*
%dir %{tinyproxy_confdir}
%config(noreplace) %{tinyproxy_confdir}/%{name}.conf
%changelog
* Wed Apr 16 2008 Jeremy Hinegardner <jeremy at hinegardner dot org> - 1.6.3-2
- fix spec review issues
- fix initscript
* Sun Mar 09 2008 Jeremy Hinegardner <jeremy at hinegardner dot org> - 1.6.3-1
- Initial rpm configuration
Index: .cvsignore
===================================================================
RCS file: /cvs/pkgs/rpms/tinyproxy/EL-5/.cvsignore,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- .cvsignore 18 Apr 2008 19:44:00 -0000 1.1
+++ .cvsignore 25 Apr 2008 02:25:19 -0000 1.2
@@ -0,0 +1 @@
+tinyproxy-1.6.3.tar.gz
Index: sources
===================================================================
RCS file: /cvs/pkgs/rpms/tinyproxy/EL-5/sources,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- sources 18 Apr 2008 19:44:00 -0000 1.1
+++ sources 25 Apr 2008 02:25:19 -0000 1.2
@@ -0,0 +1 @@
+bd14d029b12621bcfd7ee71b2f4893da tinyproxy-1.6.3.tar.gz
- Previous message (by thread): rpms/tinyproxy/EL-4 tinyproxy.conf, NONE, 1.1 tinyproxy.init, NONE, 1.1 tinyproxy.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2
- Next message (by thread): rpms/jruby/devel jruby-add-classpath-for-tests.patch, NONE, 1.1 jruby-dont-include-dependencies-in-jar.patch, NONE, 1.1 jruby-fix-jruby-start-script.patch, NONE, 1.1 jruby-remove-retroweaver-task.patch, NONE, 1.1 jruby.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the fedora-extras-commits
mailing list