Sun Dec 14 08:10:50 UTC 2008

Author: cebbert

Update of /cvs/pkgs/rpms/kernel/F-9
In directory cvs1.fedora.phx.redhat.com:/tmp/cvs-serv21547

Modified Files:
	.cvsignore kernel.spec sources upstream 
Added Files:
	linux-2.6.27.9-alsa-driver-1.0.18a.patch 
	linux-2.6.27.9-alsa-hda-add-a-quirk-for-dell-studio-15.patch 
	linux-2.6.27.9-alsa-hda-mark-dell-studio-1535-quirk.patch 
	linux-2.6.27.9-alsa-hda-no-headphone-as-line-out-swich-without-line-outs.patch 
	patch-2.6.27.9.bz2.sign 
Removed Files:
	linux-2.6-net-atm-CVE-2008-5079.patch 
	linux-2.6.27.7-alsa-driver-1.0.18a.patch 
	patch-2.6.27.8.bz2.sign 
Log Message:
Linux 2.6.27.9
  Dropped patches:
    linux-2.6-net-atm-CVE-2008-5079.patch

linux-2.6.27.9-alsa-driver-1.0.18a.patch:

--- NEW FILE linux-2.6.27.9-alsa-driver-1.0.18a.patch ---
diff -uprP a/Documentation/ALSA-Configuration.txt b/Documentation/ALSA-Configuration.txt
--- a/Documentation/ALSA-Configuration.txt	1969-12-31 19:00:00.000000000 -0500
+++ b/Documentation/ALSA-Configuration.txt	2008-11-12 05:02:25.000000000 -0500
@@ -0,0 +1,2415 @@
+
+		Advanced Linux Sound Architecture - Driver
+		==========================================
+			    Configuration guide
+
+
+Kernel Configuration
+====================
+
+To enable ALSA support you need at least to build the kernel with
+primary sound card support (CONFIG_SOUND).  Since ALSA can emulate OSS,
+you don't have to choose any of the OSS modules.
+
+Enable "OSS API emulation" (CONFIG_SND_OSSEMUL) and both OSS mixer and
+PCM supports if you want to run OSS applications with ALSA.
+
+If you want to support the WaveTable functionality on cards such as
+SB Live! then you need to enable "Sequencer support"
+(CONFIG_SND_SEQUENCER).
+
+To make ALSA debug messages more verbose, enable the "Verbose printk"
+and "Debug" options.  To check for memory leaks, turn on "Debug memory"
+too.  "Debug detection" will add checks for the detection of cards.
+
+Please note that all the ALSA ISA drivers support the Linux isapnp API
+(if the card supports ISA PnP).  You don't need to configure the cards
+using isapnptools.
+
+
+Creating ALSA devices
+=====================
+
+This depends on your distribution, but normally you use the /dev/MAKEDEV
+script to create the necessary device nodes.  On some systems you use a
+script named 'snddevices'.
+
+
+Module parameters
+=================
+
+The user can load modules with options. If the module supports more than
+one card and you have more than one card of the same type then you can
+specify multiple values for the option separated by commas.
+
+Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
+
+  Module snd
+  ----------
+
+    The core ALSA module.  It is used by all ALSA card drivers.
+    It takes the following options which have global effects.
+
+    major	- major number for sound driver
+		- Default: 116
+    cards_limit
+		- limiting card index for auto-loading (1-8)
+		- Default: 1
+		- For auto-loading more than one card, specify this
+		  option together with snd-card-X aliases.
+    slots	- Reserve the slot index for the given driver.
+		  This option takes multiple strings.		
+		  See "Module Autoloading Support" section for details.
+  
+  Module snd-pcm-oss
+  ------------------
+
+    The PCM OSS emulation module.
+    This module takes options which change the mapping of devices.
+
+    dsp_map	- PCM device number maps assigned to the 1st OSS device.
+		- Default: 0
+    adsp_map	- PCM device number maps assigned to the 2st OSS device.
+		- Default: 1
+    nonblock_open
+		- Don't block opening busy PCM devices.  Default: 1
+
+    For example, when dsp_map=2, /dev/dsp will be mapped to PCM #2 of
+    the card #0.  Similarly, when adsp_map=0, /dev/adsp will be mapped
+    to PCM #0 of the card #0.
+    For changing the second or later card, specify the option with
+    commas, such like "dsp_map=0,1".
+
+    nonblock_open option is used to change the behavior of the PCM
+    regarding opening the device.  When this option is non-zero,
+    opening a busy OSS PCM device won't be blocked but return
+    immediately with EAGAIN (just like O_NONBLOCK flag).
+    
+  Module snd-rawmidi
+  ------------------
+
+    This module takes options which change the mapping of devices.
+    similar to those of the snd-pcm-oss module.
+
+    midi_map	- MIDI device number maps assigned to the 1st OSS device.
+		- Default: 0
+    amidi_map	- MIDI device number maps assigned to the 2st OSS device.
+		- Default: 1
+
+  Common parameters for top sound card modules
+  --------------------------------------------
+
+    Each of top level sound card module takes the following options.
+
+    index	- index (slot #) of sound card
+		- Values: 0 through 31 or negative
+		- If nonnegative, assign that index number
+                - if negative, interpret as a bitmask of permissible
+		  indices; the first free permitted index is assigned
+		- Default: -1
+    id		- card ID (identifier or name)
+		- Can be up to 15 characters long
+		- Default: the card type
+		- A directory by this name is created under /proc/asound/
+		  containing information about the card
+		- This ID can be used instead of the index number in
+		  identifying the card
+    enable  	- enable card
+		- Default: enabled, for PCI and ISA PnP cards
+
+  Module snd-adlib
+  ----------------
+
+    Module for AdLib FM cards.
+
+    port	- port # for OPL chip
+
+    This module supports multiple cards. It does not support autoprobe, so
+    the port must be specified. For actual AdLib FM cards it will be 0x388.
+    Note that this card does not have PCM support and no mixer; only FM
+    synthesis.
+
+    Make sure you have "sbiload" from the alsa-tools package available and,
+    after loading the module, find out the assigned ALSA sequencer port
+    number through "sbiload -l". Example output:
+
+      Port     Client name                       Port name
+      64:0     OPL2 FM synth                     OPL2 FM Port
+
+    Load the std.sb and drums.sb patches also supplied by sbiload:
+
+      sbiload -p 64:0 std.sb drums.sb
+
+    If you use this driver to drive an OPL3, you can use std.o3 and drums.o3
+    instead. To have the card produce sound, use aplaymidi from alsa-utils:
+
+      aplaymidi -p 64:0 foo.mid
+
+  Module snd-ad1816a
+  ------------------
+
+    Module for sound cards based on Analog Devices AD1816A/AD1815 ISA chips.
+
+    clockfreq   - Clock frequency for AD1816A chip (default = 0, 33000Hz)
+    
+    This module supports multiple cards, autoprobe and PnP.
+    
+  Module snd-ad1848
+  -----------------
+
+    Module for sound cards based on AD1848/AD1847/CS4248 ISA chips.
+
+    port	- port # for AD1848 chip
+    irq		- IRQ # for AD1848  chip
+    dma1	- DMA # for AD1848 chip (0,1,3)
+    
+    This module supports multiple cards.  It does not support autoprobe
+    thus main port must be specified!!! Other ports are optional.
+    
+    The power-management is supported.
+
+  Module snd-ad1889
+  -----------------
+
+    Module for Analog Devices AD1889 chips.
+
+    ac97_quirk  - AC'97 workaround for strange hardware
+                  See the description of intel8x0 module for details.
+
+    This module supports multiple cards.
+
+  Module snd-ali5451
+  ------------------
+
+    Module for ALi M5451 PCI chip.
+
+    pcm_channels    - Number of hardware channels assigned for PCM
+    spdif           - Support SPDIF I/O
+    		    - Default: disabled
+
+    This module supports one chip and autoprobe.
+
+    The power-management is supported.
+
+  Module snd-als100
+  -----------------
[...87846 lines suppressed...]
+		inurb->number_of_packets = outurb->number_of_packets;
+		inurb->transfer_buffer_length =
+			inurb->number_of_packets *
+			inurb->iso_frame_desc[0].length;
+		preempt_disable();
+		if (u == 0) {
+			int now;
+			struct usb_device *dev = inurb->dev;
+			frame = usb_get_current_frame_number(dev);
+			do {
+				now = usb_get_current_frame_number(dev);
+				++iters;
+			} while (now > -1 && now == frame);
+		}
+		err = usb_submit_urb(inurb, GFP_ATOMIC);
+		if (err < 0) {
+			preempt_enable();
+			snd_printk(KERN_ERR"usb_submit_urb(sk->inurb[%i])"
+				   " returned %i\n", u, err);
+			return err;
+		}
+		err = usb_submit_urb(outurb, GFP_ATOMIC);
+		if (err < 0) {
+			preempt_enable();
+			snd_printk(KERN_ERR"usb_submit_urb(sk->outurb[%i])"
+				   " returned %i\n", u, err);
+			return err;
+		}
+		preempt_enable();
+		if (inurb->start_frame != outurb->start_frame) {
+			snd_printd(KERN_DEBUG
+				   "u[%i] start_frames differ in:%u out:%u\n",
+				   u, inurb->start_frame, outurb->start_frame);
+			goto check_retry;
+		}
+	}
+	snd_printdd(KERN_DEBUG "%i %i\n", frame, iters);
+	try = 0;
+check_retry:
+	if (try) {
+		usb_stream_stop(sk);
+		if (try < 5) {
+			msleep(1500);
+			snd_printd(KERN_DEBUG "goto dotry;\n");
+			goto dotry;
+		}
+		snd_printk(KERN_WARNING"couldn't start"
+			   " all urbs on the same start_frame.\n");
+		return -EFAULT;
+	}
+
+	sk->idle_inurb = sk->inurb[USB_STREAM_NURBS - 2];
+	sk->idle_outurb = sk->outurb[USB_STREAM_NURBS - 2];
+	sk->completed_inurb = sk->inurb[USB_STREAM_NURBS - 1];
+	sk->completed_outurb = sk->outurb[USB_STREAM_NURBS - 1];
+
+/* wait, check */
+	{
+		int wait_ms = 3000;
+		while (s->state != usb_stream_ready && wait_ms > 0) {
+			snd_printdd(KERN_DEBUG "%i\n", s->state);
+			msleep(200);
+			wait_ms -= 200;
+		}
+	}
+
+	return s->state == usb_stream_ready ? 0 : -EFAULT;
+}
+
+
+/*                             stop                                   */
+
+void usb_stream_stop(struct usb_stream_kernel *sk)
+{
+	int u;
+	if (!sk->s)
+		return;
+	for (u = 0; u < USB_STREAM_NURBS; ++u) {
+		usb_kill_urb(sk->inurb[u]);
+		usb_kill_urb(sk->outurb[u]);
+	}
+	sk->s->state = usb_stream_stopped;
+	msleep(400);
+}
diff -uprP a/sound/usb/usx2y/usb_stream.h b/sound/usb/usx2y/usb_stream.h
--- a/sound/usb/usx2y/usb_stream.h	1969-12-31 19:00:00.000000000 -0500
+++ b/sound/usb/usx2y/usb_stream.h	2008-11-12 05:02:25.000000000 -0500
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2007, 2008 Karsten Wiese <fzu at wemgehoertderstaat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define USB_STREAM_INTERFACE_VERSION 2
+
+#define SNDRV_USB_STREAM_IOCTL_SET_PARAMS \
+	_IOW('H', 0x90, struct usb_stream_config)
+
+struct usb_stream_packet {
+	unsigned offset;
+	unsigned length;
+};
+
+
+struct usb_stream_config {
+	unsigned version;
+	unsigned sample_rate;
+	unsigned period_frames;
+	unsigned frame_size;
+};
+
+struct usb_stream {
+	struct usb_stream_config cfg;
+	unsigned read_size;
+	unsigned write_size;
+
+	int period_size;
+
+	unsigned state;
+
+	int idle_insize;
+	int idle_outsize;
+	int sync_packet;
+	unsigned insize_done;
+	unsigned periods_done;
+	unsigned periods_polled;
+
+	struct usb_stream_packet outpacket[2];
+	unsigned		 inpackets;
+	unsigned		 inpacket_head;
+	unsigned		 inpacket_split;
+	unsigned		 inpacket_split_at;
+	unsigned		 next_inpacket_split;
+	unsigned		 next_inpacket_split_at;
+	struct usb_stream_packet inpacket[0];
+};
+
+enum usb_stream_state {
+	usb_stream_invalid,
+	usb_stream_stopped,
+	usb_stream_sync0,
+	usb_stream_sync1,
+	usb_stream_ready,
+	usb_stream_running,
+	usb_stream_xrun,
+};
+
+#if __KERNEL__
+
+#define USB_STREAM_NURBS 4
+#define USB_STREAM_URBDEPTH 4
+
+struct usb_stream_kernel {
+	struct usb_stream *s;
+
+	void *write_page;
+
+	unsigned n_o_ps;
+
+	struct urb *inurb[USB_STREAM_NURBS];
+	struct urb *idle_inurb;
+	struct urb *completed_inurb;
+	struct urb *outurb[USB_STREAM_NURBS];
+	struct urb *idle_outurb;
+	struct urb *completed_outurb;
+	struct urb *i_urb;
+
+	int iso_frame_balance;
+
+	wait_queue_head_t sleep;
+
+	unsigned out_phase;
+	unsigned out_phase_peeked;
+	unsigned freqn;
+};
+
+struct usb_stream *usb_stream_new(struct usb_stream_kernel *sk,
+				  struct usb_device *dev,
+				  unsigned in_endpoint, unsigned out_endpoint,
+				  unsigned sample_rate, unsigned use_packsize,
+				  unsigned period_frames, unsigned frame_size);
+void usb_stream_free(struct usb_stream_kernel *);
+int usb_stream_start(struct usb_stream_kernel *);
+void usb_stream_stop(struct usb_stream_kernel *);
+
+
+#endif

linux-2.6.27.9-alsa-hda-add-a-quirk-for-dell-studio-15.patch:

--- NEW FILE linux-2.6.27.9-alsa-hda-add-a-quirk-for-dell-studio-15.patch ---
>From b0fc5e043401df4cd243352f1030c4d23e767347 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai at suse.de>
Date: Fri, 21 Nov 2008 08:37:03 +0100
Subject: ALSA: hda - Add a quirk for Dell Studio 15

From: Takashi Iwai <tiwai at suse.de>

commit b0fc5e043401df4cd243352f1030c4d23e767347 upstream

Added the matching model=dell-m6 for Dell Studio 15 laptop.

Signed-off-by: Takashi Iwai <tiwai at suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
 sound/pci/hda/patch_sigmatel.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1324,6 +1324,8 @@ static struct snd_pci_quirk stac92hd73xx
 				"unknown Dell", STAC_DELL_M6),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0271,
 				"unknown Dell", STAC_DELL_M6),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f,
+				"Dell Studio 15", STAC_DELL_M6),
 	{} /* terminator */
 };
 

linux-2.6.27.9-alsa-hda-mark-dell-studio-1535-quirk.patch:

--- NEW FILE linux-2.6.27.9-alsa-hda-mark-dell-studio-1535-quirk.patch ---
>From c65574abad288d7123bd49e7906fa53b7e420239 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai at suse.de>
Date: Fri, 21 Nov 2008 18:01:44 +0100
Subject: ALSA: hda - mark Dell studio 1535 quirk

From: Takashi Iwai <tiwai at suse.de>

commit c65574abad288d7123bd49e7906fa53b7e420239 upstream

Fixed the quirk string for Dell studio 1535 (the product name wasn't
published at the time the patch was made).

Signed-off-by: Takashi Iwai <tiwai at suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
 sound/pci/hda/patch_sigmatel.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1311,7 +1311,7 @@ static struct snd_pci_quirk stac92hd73xx
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 				"DFI LanParty", STAC_92HD73XX_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254,
-				"unknown Dell", STAC_DELL_M6),
+				"Dell Studio 1535", STAC_DELL_M6),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255,
 				"unknown Dell", STAC_DELL_M6),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0256,

linux-2.6.27.9-alsa-hda-no-headphone-as-line-out-swich-without-line-outs.patch:

--- NEW FILE linux-2.6.27.9-alsa-hda-no-headphone-as-line-out-swich-without-line-outs.patch ---
From: Takashi Iwai <tiwai at suse.de>
Date: Mon, 24 Nov 2008 06:51:11 +0000 (+0100)
Subject: ALSA: hda - No 'Headphone as Line-out' swich without line-outs
X-Git-Tag: v2.6.28-rc7~50^2^2~2
X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=95026623da32848bc93fbfb472dc8737487df450

ALSA: hda - No 'Headphone as Line-out' swich without line-outs

STAC/IDT driver creates "Headphone as Line-Out" switch even if there
is no line-out pins on the machine.  For devices only with headpohnes
and speaker-outs, this switch shouldn't be created.

Signed-off-by: Takashi Iwai <tiwai at suse.de>
---

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 5a29699..7f7d899 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -2891,7 +2891,7 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
 			cfg->hp_outs && !spec->multiout.hp_nid)
 		spec->multiout.hp_nid = nid;
 
-	if (cfg->hp_outs > 1) {
+	if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) {
 		err = stac92xx_add_control(spec,
 			STAC_CTL_WIDGET_HP_SWITCH,
 			"Headphone as Line Out Switch",


--- NEW FILE patch-2.6.27.9.bz2.sign ---
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: See http://www.kernel.org/signature.html for info

iD8DBQBJRE8LyGugalF9Dw4RAlawAJ4kiYMOxQUiaPM7lYwe/vADQZWnRQCffVpB
4D8dQrlJ0tVu2HK7pxdHutQ=
=DCCw
-----END PGP SIGNATURE-----


Index: .cvsignore
===================================================================
RCS file: /cvs/pkgs/rpms/kernel/F-9/.cvsignore,v
retrieving revision 1.835
retrieving revision 1.836
diff -u -r1.835 -r1.836
--- .cvsignore	8 Dec 2008 00:04:06 -0000	1.835
+++ .cvsignore	14 Dec 2008 08:10:45 -0000	1.836
@@ -4,4 +4,4 @@
 temp-*
 kernel-2.6.27
 linux-2.6.27.tar.bz2
-patch-2.6.27.8.bz2
+patch-2.6.27.9.bz2


Index: kernel.spec
===================================================================
RCS file: /cvs/pkgs/rpms/kernel/F-9/kernel.spec,v
retrieving revision 1.880
retrieving revision 1.881
diff -u -r1.880 -r1.881
--- kernel.spec	13 Dec 2008 17:42:41 -0000	1.880
+++ kernel.spec	14 Dec 2008 08:10:45 -0000	1.881
@@ -36,7 +36,7 @@
 %if 0%{?released_kernel}
 
 # Do we have a -stable update to apply?
-%define stable_update 8
+%define stable_update 9
 # Is it a -stable RC?
 %define stable_rc 0
 # Set rpm version accordingly
@@ -647,8 +647,11 @@
 Patch400: linux-2.6-scsi-cpqarray-set-master.patch
 Patch402: linux-2.6-scsi-mpt-vmware-fix.patch
 
-Patch410: linux-2.6.27.7-alsa-driver-1.0.18a.patch
+Patch410: linux-2.6.27.9-alsa-driver-1.0.18a.patch
 Patch411: linux-2.6.27.7-alsa-driver-fixups.patch
+Patch412: linux-2.6.27.9-alsa-hda-add-a-quirk-for-dell-studio-15.patch
+Patch413: linux-2.6.27.9-alsa-hda-no-headphone-as-line-out-swich-without-line-outs.patch
+Patch414: linux-2.6.27.9-alsa-hda-mark-dell-studio-1535-quirk.patch
 
 # filesystem patches
 Patch421: linux-2.6-squashfs.patch
@@ -710,9 +713,6 @@
 # r8169 fixes
 Patch2007: linux-2.6-netdev-r8169-2.6.28.patch
 
-# ATM security fix
-Patch2006: linux-2.6-net-atm-CVE-2008-5079.patch
-
 # atl2 network driver
 Patch2020: linux-2.6-netdev-atl2.patch
 
@@ -1201,8 +1201,11 @@
 
 # ALSA
 #
-ApplyPatch linux-2.6.27.7-alsa-driver-1.0.18a.patch
+ApplyPatch linux-2.6.27.9-alsa-driver-1.0.18a.patch
 ApplyPatch linux-2.6.27.7-alsa-driver-fixups.patch
+ApplyPatch linux-2.6.27.9-alsa-hda-add-a-quirk-for-dell-studio-15.patch
+ApplyPatch linux-2.6.27.9-alsa-hda-no-headphone-as-line-out-swich-without-line-outs.patch
+ApplyPatch linux-2.6.27.9-alsa-hda-mark-dell-studio-1535-quirk.patch
 
 # block/bio
 #
@@ -1290,9 +1293,6 @@
 
 ApplyPatch linux-2.6-net-tulip-interrupt.patch
 
-# ATM security fix
-ApplyPatch linux-2.6-net-atm-CVE-2008-5079.patch
-
 # Nouveau DRM + drm fixes
 ApplyPatch drm-fedora9-rollup.patch
 ApplyPatch drm-mm-readd-nopfn.patch
@@ -1914,6 +1914,11 @@
 %kernel_variant_files -a /%{image_install_path}/xen*-%{KVERREL}.xen -e /etc/ld.so.conf.d/kernelcap-%{KVERREL}.xen.conf %{with_xen} xen
 
 %changelog
+* Sun Dec 14 2008 Chuck Ebbert <cebbert at redhat.com> 2.6.27.9-68
+- Linux 2.6.27.9
+  Dropped patches:
+    linux-2.6-net-atm-CVE-2008-5079.patch
+
 * Sat Dec 13 2008 Tom "spot" Callaway <tcallawa at redhat.com> 2.6.27.8-67
 - pull patch from davem sparc-2.6 git branch to add ebus_dma.h
 


Index: sources
===================================================================
RCS file: /cvs/pkgs/rpms/kernel/F-9/sources,v
retrieving revision 1.796
retrieving revision 1.797
diff -u -r1.796 -r1.797
--- sources	8 Dec 2008 00:04:10 -0000	1.796
+++ sources	14 Dec 2008 08:10:48 -0000	1.797
@@ -1,2 +1,2 @@
 b3e78977aa79d3754cb7f8143d7ddabd  linux-2.6.27.tar.bz2
-ec23e3dce22b23ca681199fe515f10fb  patch-2.6.27.8.bz2
+1a0b0c727fee22a4d2545276176ac089  patch-2.6.27.9.bz2


Index: upstream
===================================================================
RCS file: /cvs/pkgs/rpms/kernel/F-9/upstream,v
retrieving revision 1.715
retrieving revision 1.716
diff -u -r1.715 -r1.716
--- upstream	8 Dec 2008 00:04:11 -0000	1.715
+++ upstream	14 Dec 2008 08:10:49 -0000	1.716
@@ -1,2 +1,2 @@
 linux-2.6.27.tar.bz2
-patch-2.6.27.8.bz2
+patch-2.6.27.9.bz2


--- linux-2.6-net-atm-CVE-2008-5079.patch DELETED ---


--- linux-2.6.27.7-alsa-driver-1.0.18a.patch DELETED ---


--- patch-2.6.27.8.bz2.sign DELETED ---


