rpms/opensm/F-9 opensm-3.2.1-rpath.patch, NONE, 1.1 opensm.conf, NONE, 1.1 opensm.initd, NONE, 1.1 opensm.logrotate, NONE, 1.1 opensm.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2
Doug Ledford (dledford)
fedora-extras-commits at redhat.com
Mon Jun 30 23:33:31 UTC 2008
- Previous message (by thread): rpms/python-kiwi/devel .cvsignore, 1.11, 1.12 python-kiwi.spec, 1.15, 1.16 sources, 1.11, 1.12
- Next message (by thread): rpms/opensm/devel opensm-3.2.1-rpath.patch, NONE, 1.1 opensm.conf, NONE, 1.1 opensm.initd, NONE, 1.1 opensm.logrotate, NONE, 1.1 opensm.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Author: dledford
Update of /cvs/extras/rpms/opensm/F-9
In directory cvs-int.fedora.redhat.com:/tmp/cvs-serv22605
Modified Files:
.cvsignore sources
Added Files:
opensm-3.2.1-rpath.patch opensm.conf opensm.initd
opensm.logrotate opensm.spec
Log Message:
* Sun Jun 08 2008 Doug Ledford <dledford at redhat.com> - 3.2.1-1
- Initial package for Fedora review process
opensm-3.2.1-rpath.patch:
--- NEW FILE opensm-3.2.1-rpath.patch ---
--- opensm-3.2.1/libvendor/Makefile.am.rpath 2008-01-15 15:23:51.000000000 -0500
+++ opensm-3.2.1/libvendor/Makefile.am 2008-06-30 11:03:22.000000000 -0400
@@ -94,8 +94,8 @@ EXTRA_DIST = $(srcdir)/libosmvendor.map
# name. What we can do it create a link to the installed file such
# that it will mark it with an alias...
# we find the new lib by traversing the links
-install-exec-hook:
- if test -L $(DESTDIR)/$(libdir)/libosmvendor-$(VERSION).so; then rm $(DESTDIR)/$(libdir)/libosmvendor-$(VERSION).so; fi; \
- lname=`\ls -l $(DESTDIR)/$(libdir)/libosmvendor.so | awk '{print $$NF}'`; \
- ln -s $$lname $(DESTDIR)/$(libdir)/libosmvendor_$(with_osmv).so; \
- ln -s $$lname $(DESTDIR)/$(libdir)/libosmvendor-$(VERSION).so
+#install-exec-hook:
+# if test -L $(DESTDIR)/$(libdir)/libosmvendor-$(VERSION).so; then rm $(DESTDIR)/$(libdir)/libosmvendor-$(VERSION).so; fi; \
+# lname=`\ls -l $(DESTDIR)/$(libdir)/libosmvendor.so | awk '{print $$NF}'`; \
+# ln -s $$lname $(DESTDIR)/$(libdir)/libosmvendor_$(with_osmv).so; \
+# ln -s $$lname $(DESTDIR)/$(libdir)/libosmvendor-$(VERSION).so
--- opensm-3.2.1/opensm/Makefile.am.rpath 2008-03-12 17:43:16.000000000 -0400
+++ opensm-3.2.1/opensm/Makefile.am 2008-06-30 11:11:40.000000000 -0400
@@ -79,7 +79,7 @@ endif
if OSMV_SIM
USEGPPLINK = $(LIBTOOL) --mode=link g++ $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
libopensm.la: $(libopensm_la_OBJECTS) $(libopensm_la_DEPENDENCIES)
- $(USEGPPLINK) -rpath $(libdir) $(libopensm_la_LDFLAGS) $(libopensm_la_OBJECTS) $(libopensm_la_LIBADD) $(LIBS)
+ $(USEGPPLINK) $(libopensm_la_LDFLAGS) $(libopensm_la_OBJECTS) $(libopensm_la_LIBADD) $(LIBS)
opensm$(EXEEXT): $(opensm_OBJECTS) $(opensm_DEPENDENCIES)
@rm -f opensm$(EXEEXT)
$(USEGPPLINK) $(opensm_LDFLAGS) $(opensm_OBJECTS) $(opensm_LDADD) $(LIBS)
@@ -87,9 +87,9 @@ endif
# we need to be able to load libraries from local build subtree before make install
# we always give precedence to local tree libs and then use the pre-installed ones.
-opensm_LDADD = -L../complib -L../libvendor -L. $(OSMV_LDADD) -lopensm -losmcomp -losmvendor
+opensm_LDADD = -L../complib -losmcomp -L../libvendor -losmvendor -L. -lopensm
-opensm_LDFLAGS = -Wl,--rpath -Wl,$(libdir) -lpthread -ldl
+opensm_LDFLAGS = -lpthread -ldl
opensmincludedir = $(includedir)/infiniband/opensm
@@ -124,10 +124,10 @@ EXTRA_DIST = $(srcdir)/libopensm.map $(s
# name. What we can do it create a link to the installed file such
# that it will mark it with an alias...
# we find the new lib by traversing the links
-install-exec-hook:
- if test -L $(DESTDIR)/$(libdir)/libopensm-$(VERSION).so; then rm $(DESTDIR)/$(libdir)/libopensm-$(VERSION).so; fi; \
- lname=`\ls -l $(DESTDIR)/$(libdir)/libopensm.so | awk '{print $$NF}'`; \
- ln -s $$lname $(DESTDIR)/$(libdir)/libopensm-$(VERSION).so
+#install-exec-hook:
+# if test -L $(DESTDIR)/$(libdir)/libopensm-$(VERSION).so; then rm $(DESTDIR)/$(libdir)/libopensm-$(VERSION).so; fi; \
+# lname=`\ls -l $(DESTDIR)/$(libdir)/libopensm.so | awk '{print $$NF}'`; \
+# ln -s $$lname $(DESTDIR)/$(libdir)/libopensm-$(VERSION).so
# generate c and h files from the lex and yacc files
dist-hook: $(srcdir)/osm_qos_parser_y.c $(srcdir)/osm_qos_parser_l.c
--- opensm-3.2.1/osmtest/Makefile.am.rpath 2008-03-12 17:43:17.000000000 -0400
+++ opensm-3.2.1/osmtest/Makefile.am 2008-06-30 11:03:22.000000000 -0400
@@ -18,10 +18,10 @@ osmtest_CFLAGS = -Wall $(OSMV_CFLAGS) -D
else
osmtest_CFLAGS = -Wall $(OSMV_CFLAGS) -DVENDOR_RMPP_SUPPORT $(DBGFLAGS)
endif
-osmtest_LDADD = -L../complib -L../libvendor -L../opensm -L$(libdir) -L. \
- $(OSMV_LDADD) -lopensm -losmcomp -losmvendor
+osmtest_LDADD = -L../complib -losmcomp -L../libvendor -losmvendor \
+ -L../opensm -lopensm
-osmtest_LDFLAGS = -Wl,--rpath -Wl,$(libdir) -lpthread -L../opensm
+osmtest_LDFLAGS = -lpthread
# for linking with the simulator client library we have to use g++:
if OSMV_SIM
USEGPPLINK = $(LIBTOOL) --mode=link g++ $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
--- opensm-3.2.1/complib/Makefile.am.rpath 2008-03-12 17:43:16.000000000 -0400
+++ opensm-3.2.1/complib/Makefile.am 2008-06-30 11:03:22.000000000 -0400
@@ -85,7 +85,7 @@ EXTRA_DIST = $(srcdir)/libosmcomp.map $(
# name. What we can do it create a link to the installed file such
# that it will mark it with an alias...
# we find the new lib by traversing the links
-install-exec-hook:
- if test -L $(DESTDIR)/$(libdir)/libosmcomp-$(VERSION).so; then rm $(DESTDIR)/$(libdir)/libosmcomp-$(VERSION).so; fi; \
- lname=`\ls -l $(DESTDIR)/$(libdir)/libosmcomp.so | awk '{print $$NF}'`; \
- ln -s $$lname $(DESTDIR)/$(libdir)/libosmcomp-$(VERSION).so
+#install-exec-hook:
+# if test -L $(DESTDIR)/$(libdir)/libosmcomp-$(VERSION).so; then rm $(DESTDIR)/$(libdir)/libosmcomp-$(VERSION).so; fi; \
+# lname=`\ls -l $(DESTDIR)/$(libdir)/libosmcomp.so | awk '{print $$NF}'`; \
+# ln -s $$lname $(DESTDIR)/$(libdir)/libosmcomp-$(VERSION).so
--- opensm-3.2.1/Makefile.am.rpath 2008-03-12 17:43:16.000000000 -0400
+++ opensm-3.2.1/Makefile.am 2008-06-30 11:03:22.000000000 -0400
@@ -9,16 +9,16 @@ MAINTAINERCLEANFILES = Makefile.in acloc
ACLOCAL = aclocal -I $(ac_aux_dir)
# we should provide a hint for other apps about the build mode of this project
-install-exec-hook:
- mkdir -p $(DESTDIR)/$(includedir)
-if DEBUG
- echo "define osm_build_type \"debug\"" > $(DESTDIR)/$(includedir)/infiniband/opensm/osm_build_id.h
-else
- echo "define osm_build_type \"free\"" > $(DESTDIR)/$(includedir)/infiniband/opensm/osm_build_id.h
-endif
- $(top_srcdir)/config/install-sh -m 755 -d $(DESTDIR)/$(sysconfdir)/init.d
- cp $(top_builddir)/scripts/opensm.init $(DESTDIR)/$(sysconfdir)/init.d/opensmd
- chmod 755 $(DESTDIR)/$(sysconfdir)/init.d/opensmd
+#install-exec-hook:
+# mkdir -p $(DESTDIR)/$(includedir)
+#if DEBUG
+# echo "define osm_build_type \"debug\"" > $(DESTDIR)/$(includedir)/infiniband/opensm/osm_build_id.h
+#else
+# echo "define osm_build_type \"free\"" > $(DESTDIR)/$(includedir)/infiniband/opensm/osm_build_id.h
+#endif
+# $(top_srcdir)/config/install-sh -m 755 -d $(DESTDIR)/$(sysconfdir)/init.d
+# cp $(top_builddir)/scripts/opensm.init $(DESTDIR)/$(sysconfdir)/init.d/opensmd
+# chmod 755 $(DESTDIR)/$(sysconfdir)/init.d/opensmd
man_MANS = man/opensm.8 man/osmtest.8
--- NEW FILE opensm.conf ---
OPTIONS="-B"
# DEBUG mode
# This option specifies a debug option.
# These options are not normally needed.
# The number following -d selects the debug
# option to enable as follows:
# OPT Description
# --- -----------------
# 0 - Ignore other SM nodes.
# 1 - Force single threaded dispatching.
# 2 - Force log flushing after each log message.
# 3 - Disable multicast support.
# 4 - Put OpenSM in memory tracking mode.
# 10.. Put OpenSM in testability mode.
# none, no debug options are enabled.
# OPTIONS="$OPTIONS -d 1"
# LMC
# This option specifies the subnet's LMC value.
# The number of LIDs assigned to each port is 2^LMC.
# The LMC value must be in the range 0-7.
# LMC values > 0 allow multiple paths between ports.
# LMC values > 0 should only be used if the subnet
# topology actually provides multiple paths between
# ports, i.e. multiple interconnects between switches.
# OpenSM defaults to LMC = 0, which allows
# one path between any two ports.
# OPTIONS="$OPTIONS -l 0"
# MAXSMPS
# This option specifies the number of VL15 SMP MADs
# allowed on the wire at any one time.
# Specifying -maxsmps 0 allows unlimited outstanding SMPs.
# Without -maxsmps, OpenSM defaults to a maximum of
# four outstanding SMP.
OPTIONS="$OPTIONS -maxsmps 0"
# REASSIGN_LIDS
# This option causes OpenSM to reassign LIDs to all
# end nodes. Specifying "REASSIGN_LIDS=yes" on a running subnet
# may disrupt subnet traffic.
# With "REASSIGN_LIDS=no", OpenSM attempts to preserve existing
# LID assignments resolving multiple use of same LID.
# OPTIONS="$OPTIONS -r"
# SWEEP
# This option specifies the number of seconds between
# subnet sweeps. Specifying SWEEP=0 disables sweeping.
# OpenSM defaults to a sweep interval of 10 seconds.
# OPTIONS="$OPTIONS -s 10"
# TIMEOUT
# This option specifies the time in milliseconds
# used for transaction timeouts.
# Specifying -t 0 disables timeouts.
# Without -t, OpenSM defaults to a timeout value of
# 200 milliseconds.
# OPTIONS="$OPTIONS -t 200"
# OSM_LOG
# This option defines the log to be the given file.
# By default the log goes to /tmp/osm.log, which isn't very suitable
# for a distribution, so we override it by default here.
# For the log to go to standard output use OSM_LOG=stdout.
OPTIONS="$OPTIONS -f /var/log/opensm.log"
# QoS
# This option enable QoS support in opensm
# OPTIONS="$OPTIONS -Q"
# QoS_POLICY
# This option sets the file from which to load the QoS policy
# OPTIONS="$OPTIONS -Y /etc/rdma/qos_policy"
# VERBOSE
# This option increases the log verbosity level.
# The "-v" option may be specified multiple times
# to further increase the verbosity level.
# "-V" option sets the maximum verbosity level and
# forces log flushing.
# The "-V" is equivalent to "-vf 0xFF -d 2".
# OPTIONS="$OPTIONS -v 0x00"
# ROUTING_ENGINE
# This option chooses the routing engine to use instead of the default
# algorithm Min Hop
# Supported engines are: updn, file, ftree, lash, dor
# OPTIONS="$OPTIONS -R updn"
# ROOT_GUID_FILE
# This option only allowed when UPDN algorithm is activated
# It specifies the guid list file from which to fetch the root node guid list
# The file contain in each line only one valid guid
# OPTIONS="$OPTIONS -a /etc/rdma/root_guids"
# CN_GUID_FILE
# This option only allowed when UPDN algorithm is activated
# It specifies the guid list file from which to fetch the compute node
# guid list
# The file contain in each line only one valid guid
# OPTIONS="$OPTIONS -u /etc/rdma/cn_guids"
# GUID
# This option specifies the local port GUID value
# with which OpenSM should bind. OpenSM may be
# bound to 1 port at a time.
# If GUID given is 0, opensm would list the available guids and wait for
# the user to select one (which obviously is no use in an init script)
# Without -g, OpenSM trys to use the default port.
# OPTIONS="$OPTIONS -g <guid in hex>"
# PRIORITY
# This option specifies the SM's PRIORITY.
# This will effect the handover cases, where master
# is chosen by priority and GUID. Range goes
# from 0 (lowest priority) to 15 (highest).
OPTIONS="$OPTIONS -p 15"
# OSM_CACHE_DIR
# There is no command line option to opensm to set this, it can only be set
# as an environment variable.
OSM_CACHE_DIR=/var/cache/opensm
# CACHE_OPTIONS
# Cache the given command line options into the file
# OSM_CACHE_DIR/opensm.opts for use next invocation
# Set to '--cache-options' or '-c' in order to enable
# OPTIONS="$OPTIONS -c"
--- NEW FILE opensm.initd ---
#!/bin/bash
#
# Bring up/down opensm
#
# chkconfig: - 15 85
# description: Activates/Deactivates InfiniBand Subnet Manager
# config: /etc/rdma/opensm.conf
#
### BEGIN INIT INFO
# Provides: opensm
# Default-Stop: 0 1 2 3 4 5 6
# Required-Start: $rdma
# Short-Description: Starts/Stops the InfiniBand Subnet Manager
# Description: Starts/Stops the InfiniBand Subnet Manager
### END INIT INFO
. /etc/rc.d/init.d/functions
prog=/usr/sbin/opensm
CONFIG=/etc/rdma/opensm.conf
PID_FILE=/var/run/opensm.pid
start()
{
local OSM_PID=
if [ ! -f $CONFIG ]; then
echo -n "Starting opensm: $CONFIG missing"
echo_failure
return 6
fi
. $CONFIG
[ -f /var/lock/subsys/opensm ] && return 0
# Start opensm
echo -n "Starting IB Subnet Manager:"
$prog $OPTIONS > /dev/null 2>&1 &
OSM_PID=$!
sleep 1
checkpid $OSM_PID
RC=$?
[ $RC -eq 0 ] && echo_success || echo_failure
[ $RC -eq 0 ] && touch /var/lock/subsys/opensm
[ $RC -eq 0 ] && echo $OSM_PID > $PID_FILE
echo
return $RC
}
stop()
{
[ -f /var/lock/subsys/opensm ] || return 0
echo -n "Stopping IB Subnet Manager."
OSM_PID=`cat $PID_FILE`
checkpid "$OSM_PID"
RC=$?
if [ $RC -ne 0 ]; then
rm -f $PID_FILE
rm -f /var/lock/subsys/opensm
echo_success
return 0
fi
# Kill opensm
kill -15 $OSM_PID > /dev/null 2>&1
cnt=0
while [ $cnt -lt 6 -a checkpid $OSM_PID -eq 0 ]; do
echo -n "."
sleep 1
let cnt++
done
if [ checkpid $OSM_PID -eq 0 ]; then
kill -KILL $OSM_PID > /dev/null 2>&1
echo -n "+"
sleep 1
fi
checkpid $pid
DEAD=$?
if [ $DEAD -eq 0 ]; then
echo_failure
echo
return 1
fi
echo_success
echo
# Remove pid file if any.
rm -f $PID_FILE
rm -f /var/lock/subsys/opensm
return 0
}
restart ()
{
stop
start
}
condrestart ()
{
[ -f /var/lock/subsys/opensm ] && restart || return 0
}
reload ()
{
[ -f $PID_FILE ] || return 0
OSM_PID=`cat $PID_FILE`
action $"Rescanning IB Subnet:" kill -HUP $OSM_PID
return $?
}
usage ()
{
echo
echo "Usage: `basename $0` {start|stop|restart|condrestart|try-restart|force-reload|status}"
echo
return 2
}
case $ACTION in
start) start; RC=$? ;;
stop) stop; RC=$? ;;
restart) restart; RC=$? ;;
reload) reload; RC=$? ;;
condrestart) condrestart; RC=$? ;;
try-restart) condrestart; RC=$? ;;
force-reload) condrestart; RC=$? ;;
status) status $prog; RC=$? ;;
*) usage; RC=$? ;;
esac
exit $RC
--- NEW FILE opensm.logrotate ---
/var/log/opensm.log {
missingok
notifempty
copytruncate
weekly
compress
}
--- NEW FILE opensm.spec ---
Name: opensm
Version: 3.2.1
Release: 1%{?dist}
Summary: OpenIB InfiniBand Subnet Manager and management utilities
Group: System Environment/Daemons
License: GPLv2 or BSD
Url: http://www.openfabrics.org/
Source0: http://www.openfabrics.org/downloads/management/%{name}-%{version}.tar.gz
Source1: opensm.conf
Source2: opensm.logrotate
Source3: opensm.initd
Patch0: opensm-3.2.1-rpath.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
BuildRequires: libibmad-devel >= 1.2.0, libtool
Requires: %{name}-libs = %{version}-%{release}, logrotate, rdma
%description
OpenSM is the OpenIB project's Subnet Manager for Infiniband networks.
The subnet manager is run as a system daemon on one of the machines in
the infiniband fabric to manage the fabric's routing state. This package
also contains various tools for diagnosing and testing Infiniband networks
that can be used from any machine and do not need to be run on a machine
running the opensm daemon.
%package libs
Summary: Libraries used by opensm and included utilities
Group: System Environment/Libraries
%description libs
Shared libraries for Infiniband user space access
%package devel
Summary: Development files for the opensm-libs libraries
Group: Development/System
Requires: %{name}-libs = %{version}-%{release}
%description devel
Development environment for the opensm libraries
%package static
Summary: Static version of the opensm libraries
Group: Development/System
Requires: %{name}-devel = %{version}-%{release}
%description static
Static version of opensm libraries
%prep
%setup -q
%patch0 -p1 -b .rpath
./autogen.sh
%build
%configure --with-opensm-conf-sub-dir=rdma
make %{?_smp_mflags}
%install
rm -rf $RPM_BUILD_ROOT
make install DESTDIR=$RPM_BUILD_ROOT
# remove unpackaged files from the buildroot
rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
install -D -m644 %{SOURCE1} $RPM_BUILD_ROOT%{_sysconfdir}/rdma/opensm.conf
install -D -m644 %{SOURCE2} $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/opensm
install -D -m755 %{SOURCE3} $RPM_BUILD_ROOT%{_initrddir}/opensm
mkdir -p ${RPM_BUILD_ROOT}/var/cache/opensm
%clean
rm -rf $RPM_BUILD_ROOT
%post
if [ $1 = 1 ]; then
/sbin/chkconfig --add opensm
else
/sbin/service opensm condrestart
fi
%preun
if [ $1 = 0 ]; then
/sbin/service opensm stop
/sbin/chkconfig --del opensm
rm -f /var/cache/opensm/*
fi
%post libs -p /sbin/ldconfig
%postun libs -p /sbin/ldconfig
%files
%defattr(-,root,root,-)
%dir /var/cache/opensm
%{_sbindir}/*
%{_initrddir}/opensm
%{_mandir}/man8/*
%config(noreplace) %{_sysconfdir}/logrotate.d/opensm
%config(noreplace) %{_sysconfdir}/rdma/opensm.conf
%doc AUTHORS COPYING ChangeLog INSTALL README NEWS
%files libs
%defattr(-,root,root,-)
%{_libdir}/lib*.so.*
%files devel
%defattr(-,root,root,-)
%{_libdir}/lib*.so
%{_includedir}/infiniband
%files static
%defattr(-,root,root,-)
%{_libdir}/lib*.a
%changelog
* Sun Jun 08 2008 Doug Ledford <dledford at redhat.com> - 3.2.1-1
- Initial package for Fedora review process
Index: .cvsignore
===================================================================
RCS file: /cvs/extras/rpms/opensm/F-9/.cvsignore,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- .cvsignore 30 Jun 2008 20:02:44 -0000 1.1
+++ .cvsignore 30 Jun 2008 23:32:43 -0000 1.2
@@ -0,0 +1 @@
+opensm-3.2.1.tar.gz
Index: sources
===================================================================
RCS file: /cvs/extras/rpms/opensm/F-9/sources,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- sources 30 Jun 2008 20:02:44 -0000 1.1
+++ sources 30 Jun 2008 23:32:43 -0000 1.2
@@ -0,0 +1 @@
+997d10f81896a0d70e0f21f0e78eca92 opensm-3.2.1.tar.gz
- Previous message (by thread): rpms/python-kiwi/devel .cvsignore, 1.11, 1.12 python-kiwi.spec, 1.15, 1.16 sources, 1.11, 1.12
- Next message (by thread): rpms/opensm/devel opensm-3.2.1-rpath.patch, NONE, 1.1 opensm.conf, NONE, 1.1 opensm.initd, NONE, 1.1 opensm.logrotate, NONE, 1.1 opensm.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the fedora-extras-commits
mailing list