rpms/unbound/F-10 unbound.conf, NONE, 1.1 unbound.init, NONE, 1.1 unbound.spec, NONE, 1.1 sources, 1.1, 1.2

Paul Wouters pwouters at fedoraproject.org
Sat Nov 1 16:53:54 UTC 2008 

Author: pwouters

Update of /cvs/extras/rpms/unbound/F-10
In directory cvs1.fedora.phx.redhat.com:/tmp/cvs-serv28610

Modified Files:
	sources 
Added Files:
	unbound.conf unbound.init unbound.spec 
Log Message:
initial build for F-10



--- NEW FILE unbound.conf ---
#
#
# See unbound.conf(5) man page.
#
# this is a comment.

#Use this to include other text into the file.
#include: "otherfile.conf"

#
# The server clause sets the main parameters. 
server:
	# whitespace is not necessary, but looks cleaner.

	# To enable DNSSEC trust anchors, install the dnssec-keys package and
	# uncomment the line below - note chroot breaks this
	# trusted-keys-file: "/etc/pki/dnssec/allkeys.conf"

	# verbosity number, 0 is least verbose. 1 is default.
	verbosity: 1

	# print statistics to the log (for every thread) every N seconds.
	# Set to "" or 0 to disable. Default is disabled.
	statistics-interval: 3600
	
	# enable cumulative statistics, without clearing them after printing.
	# statistics-cumulative: no

	# number of threads to create. 1 disables threading.
	num-threads: 2

	# specify the interfaces to answer queries from by ip-address.
	# The default is to listen to localhost (127.0.0.1 and ::1).
	# specify 0.0.0.0 and ::0 to bind to all available interfaces.
	# specify every interface on a new 'interface:' labelled line.
	# The listen interfaces are not changed on reload, only on restart.
	# interface: 192.0.2.153
	# interface: 192.0.2.154
	# interface: 2001:DB8::5
	#
	# interface: 0.0.0.0
	# interface: ::0
	
	# enable this feature to copy the source address of queries to reply.
	# Socket options not be supported on all platforms. experimental. 
	# NOTE: Enable this option when specifying interface 0.0.0.0 or ::0 
	# interface-automatic: yes

	# port to answer queries from
	# port: 53

	# specify the interfaces to send outgoing queries to authoritative
	# server from by ip-address. If none, the default (all) interface
	# is used. Specify every interface on a 'outgoing-interface:' line.
	# outgoing-interface: 192.0.2.153
	# outgoing-interface: 2001:DB8::5
	# outgoing-interface: 2001:DB8::6

	# number of ports to allocate per thread, determines the size of the
	# port range that can be open simultaneously. 
	# outgoing-range: 256
	
	# permit unbound to use this port number or port range for
	# making outgoing queries, using an outgoing interface.
	# outgoing-port-permit: 32768

	# deny unbound the use this of port number or port range for
	# making outgoing queries, using an outgoing interface.
	# Use this to make sure unbound does not grab a UDP port that some
	# other server on this computer needs. The default is to avoid
	# IANA-assigned port numbers.
	# outgoing-port-avoid: "3200-3208"

	# number of outgoing simultaneous tcp buffers to hold per thread.
	# outgoing-num-tcp: 10

	# number of incoming simultaneous tcp buffers to hold per thread.
	# incoming-num-tcp: 10
	
	# buffer size for handling DNS data. No messages larger than this
	# size can be sent or received, by UDP or TCP. In bytes.
	# msg-buffer-size: 65552

	# the amount of memory to use for the message cache.
	# plain value in bytes or you can append k, m or G. default is "4Mb". 
	# msg-cache-size: 4m

	# the number of slabs to use for the message cache.
	# the number of slabs must be a power of 2.
	# more slabs reduce lock contention, but fragment memory usage.
	# msg-cache-slabs: 4

	# the number of queries that a thread gets to service.
	# num-queries-per-thread: 1024

	# the amount of memory to use for the RRset cache.
	# plain value in bytes or you can append k, m or G. default is "4Mb". 
	# rrset-cache-size: 4m

	# the number of slabs to use for the RRset cache.
	# the number of slabs must be a power of 2.
	# more slabs reduce lock contention, but fragment memory usage.
	# rrset-cache-slabs: 4
	
	# the time to live (TTL) value cap for RRsets and messages in the
	# cache. Items are not cached for longer. In seconds.
	# cache-max-ttl: 86400

	# the time to live (TTL) value for cached roundtrip times and
	# EDNS version information for hosts. In seconds.
	# infra-host-ttl: 900

	# the time to live (TTL) value for cached lame delegations. In sec.
	# infra-lame-ttl: 900

	# the number of slabs to use for the Infrastructure cache.
	# the number of slabs must be a power of 2.
	# more slabs reduce lock contention, but fragment memory usage.
	# infra-cache-slabs: 4

	# the maximum number of hosts that are cached (roundtrip times, EDNS).
	# infra-cache-numhosts: 10000

	# the maximum size of the lame zones cached per host. in bytes.
	# infra-cache-lame-size: 10k

	# Enable IPv4, "yes" or "no".
	# do-ip4: yes

	# Enable IPv6, "yes" or "no".
	# do-ip6: yes

	# Enable UDP, "yes" or "no".
	# do-udp: yes

	# Enable TCP, "yes" or "no".
	# do-tcp: yes

	# Detach from the terminal, run in background, "yes" or "no".
	# do-daemonize: yes

	# control which clients are allowed to make (recursive) queries
	# to this server. Specify classless netblocks with /size and action.
	# By default everything is refused, except for localhost.
	# Choose deny (drop message), refuse (polite error reply), allow.
	# access-control: 0.0.0.0/0 refuse
	# access-control: 127.0.0.0/8 allow
	# access-control: ::0/0 refuse
	# access-control: ::1 allow
	# access-control: ::ffff:127.0.0.1 allow
	
	# if given, a chroot(2) is done to the given directory.
	# i.e. you can chroot to the working directory, for example,
	# for extra security, but make sure all files are in that directory.
	#
	# If chroot is enabled, you should pass the configfile (from the
	# commandline) as a full path from the original root. After the
	# chroot has been performed the now defunct portion of the config 
	# file path is removed to be able to reread the config after a reload. 
	#
	# All other file paths (working dir, pidfile, logfile, roothints,
	# key files) can be specified in several ways:
	# 	o as an absolute path relative to the new root.
	# 	o as a relative path to the working directory.
	# 	o as an absolute path relative to the original root.
	# In the last case the path is adjusted to remove the unused portion.
	#
	# Additionally, unbound may need to access /dev/random (for entropy)
	# and to /dev/log (if you use syslog) from inside the chroot.
	# How to do this is specific to your OS.
	#
	# If you give "" no chroot is performed. The path must not end in a /.
	chroot: "/var/lib/unbound"

	# if given, user privileges are dropped (after binding port),
	# and the given username is assumed. Default is user "unbound".
	# If you give "" no privileges are dropped.
	username: "unbound"

	# the working directory. The relative files in this config are 
	# relative to this directory. If you give "" the working directory
	# is not changed.
	# directory: "/var/lib/unbound"

	# the log file, "" means log to stderr. 
	# Use of this option sets use-syslog to "no".
	# logfile: ""
	
	# Log to syslog(3) if yes. The log facility LOG_DAEMON is used to 
	# log to, with identity "unbound". If yes, it overrides the logfile.
	# use-syslog: yes 

	# the pid file.
	pidfile: "/var/run/unbound/unbound.pid"
	
	# file to read root hints from.
	# get one from ftp://FTP.INTERNIC.NET/domain/named.cache
	# root-hints: ""
	
	# enable to not answer id.server and hostname.bind queries.
	# hide-identity: no
	
	# enable to not answer version.server and version.bind queries.
	# hide-version: no
	
	# the identity to report. Leave "" or default to return hostname.
	# identity: ""
	
	# the version to report. Leave "" or default to return package version.
	# version: ""
	
	# the target fetch policy.
	# series of integers describing the policy per dependency depth. 
	# The number of values in the list determines the maximum dependency 
	# depth the recursor will pursue before giving up. Each integer means:
	# 	-1 : fetch all targets opportunistically,
	# 	0: fetch on demand,
	#	positive value: fetch that many targets opportunistically.
	# Enclose the list of numbers between quotes ("").
	# target-fetch-policy: "3 2 1 0 0"
	
	# Harden against very small EDNS buffer sizes. 
	# harden-short-bufsize: no
	
	# Harden against unseemly large queries.
	# harden-large-queries: no
	
	# Harden against out of zone rrsets, to avoid spoofing attempts. 
	harden-glue: yes
	
	# Harden against receiving dnssec-stripped data. If you turn it
	# off, failing to validate dnskey data for a trustanchor will 
	# trigger insecure mode for that zone (like without a trustanchor).
	# Default on, which insists on dnssec data for trust-anchored zones.
	harden-dnssec-stripped: yes
	
	# Use 0x20-encoded random bits in the query to foil spoof attempts.
	# Disabled by default, because some caching forwarders may not
	# support this (if you have forward-zones). Most authority servers do.
	# This feature is an experimental implementation of draft dns-0x20.
	# It is known that some authority servers do not support 0x20, and
	# resolution will fail for them. A solution is on the TODO list.
	use-caps-for-id: no
	
	# Do not query the following addresses. No DNS queries are sent there.
	# List one address per entry. List classless netblocks with /size,
	# do-not-query-address: 127.0.0.1/8
	# do-not-query-address: ::1
	
	# if yes, the above default do-not-query-address entries are present.
	# if no, localhost can be queried (for testing and debugging).
	# do-not-query-localhost: yes
	
	# module configuration of the server. A string with identifiers
	# separated by spaces. "iterator" or "validator iterator"
	# module-config: "validator iterator"
	
	# File with trusted keys for validation. Specify more than one file
	# with several entries, one file per entry.
	# Zone file format, with DS and DNSKEY entries.
	# trust-anchor-file: ""
	
	# Trusted key for validation. DS or DNSKEY. specify the RR on a
	# single line, surrounded by "". TTL is ignored. class is IN default.
	# (These examples are from August 2007 and may not be valid anymore).
	# trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ=="
	# trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A"

	# File with trusted keys for validation. Specify more than one file
	# with several entries, one file per entry. Like trust-anchor-file
	# but has a different file format. Format is BIND-9 style format, 
	# the trusted-keys { name flag proto algo "key"; }; clauses are read.
	# trusted-keys-file: ""

	# Override the date for validation with a specific fixed date.
	# Do not set this unless you are debugging signature inception
	# and expiration. "" or "0" turns the feature off. 
	# val-override-date: ""
	
	# The time to live for bogus data, rrsets and messages. This avoids
	# some of the revalidation, until the time interval expires. in secs.
	# val-bogus-ttl: 900
	
	# Should additional section of secure message also be kept clean of
	# unsecure data. Useful to shield the users of this validator from
	# potential bogus data in the additional section. All unsigned data 
	# in the additional section is removed from secure messages.
	# val-clean-additional: yes
	
	# Turn permissive mode on to permit bogus messages. Thus, messages
	# for which security checks failed will be returned to clients,
	# instead of SERVFAIL. It still performs the security checks, which
	# result in interesting log files and possibly the AD bit in
	# replies if the message is found secure. The default is off.
	val-permissive-mode: no
	
	# It is possible to configure NSEC3 maximum iteration counts per
	# keysize. Keep this table very short, as linear search is done.
	# A message with an NSEC3 with larger count is marked insecure.
	# List in ascending order the keysize and count values.
	# val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500"

	# the amount of memory to use for the key cache.
	# plain value in bytes or you can append k, m or G. default is "4Mb". 
	# key-cache-size: 4m

	# the number of slabs to use for the key cache.
	# the number of slabs must be a power of 2.
	# more slabs reduce lock contention, but fragment memory usage.
	# key-cache-slabs: 4

	# a number of locally served zones can be configured.
	# 	local-zone: <zone> <type>
	# 	local-data: "<resource record string>"
	# o deny serves local data (if any), else, drops queries. 
	# o refuse serves local data (if any), else, replies with error.
	# o static serves local data, else, nxdomain or nodata answer.
	# o transparent serves local data, else, resolves normally .
	# o redirect serves the zone data for any subdomain in the zone.
	# o nodefault can be used to normally resolve AS112 zones.
	#
	# defaults are localhost address, reverse for 127.0.0.1 and ::1
	# and nxdomain for AS112 zones. If you configure one of these zones
	# the default content is omitted, or you can omit it with 'nodefault'.
	# 
	# If you configure local-data without specifying local-zone, by
	# default a transparent local-zone is created for the data.
	#
	# You can add locally served data with
	# local-zone: "local." static
	# local-data: "mycomputer.local. IN A 192.0.2.51"
	# local-data: 'mytext.local TXT "content of text record"'
	#
	# You can override certain queries with
	# local-data: "adserver.example.com A 127.0.0.1"
	#
	# You can redirect a domain to a fixed address with
	# (this makes example.com, www.example.com, etc, all go to 192.0.2.3)
	# local-zone: "example.com" redirect
	# local-data: "example.com A 192.0.2.3"


# Stub zones.
# Create entries like below, to make all queries for 'example.com' and 
# 'example.org' go to the given list of nameservers. list zero or more 
# nameservers by hostname or by ipaddress.
# stub-zone:
#	name: "example.com"
#	stub-addr: 192.0.2.68
# stub-zone:
#	name: "example.org"
#	stub-host: ns.example.com.

# Forward zones
# Create entries like below, to make all queries for 'example.com' and
# 'example.org' go to the given list of servers. These servers have to handle
# recursion to other nameservers. List zero or more nameservers by hostname
# or by ipaddress. Use an entry with name "." to forward all queries.
# forward-zone:
# 	name: "example.com"
# 	forward-addr: 192.0.2.68
# 	forward-addr: 192.0.2.73 at 5355  # forward to port 5355.
# forward-zone:
# 	name: "example.org"
# 	forward-host: fwd.example.com


--- NEW FILE unbound.init ---
#!/bin/sh
#
# unbound	This shell script takes care of starting and stopping
#		unbound (DNS server).
#
# chkconfig:   - 14 86
# description:	unbound is a Domain Name Server (DNS) \
#		that is used to resolve host names to IP addresses.

### BEGIN INIT INFO
# Provides: unbound
# Required-Start: $network $local_fs
# Required-Stop: $network $local_fs
# Should-Start: $syslog
# Should-Stop: $syslog
# Short-Description: unbound recursive Domain Name Server.
# Description:  unbound is a Domain Name Server (DNS) 
#		that is used to resolve host names to IP addresses.
### END INIT INFO

# Source function library.
. /etc/rc.d/init.d/functions

exec="/usr/sbin/unbound"
config="/var/lib/unbound/unbound.conf"
rootdir="/var/lib/unbound"
pidfile="/var/run/unbound/unbound.pid"

[ -e /etc/sysconfig/unbound ] && . /etc/sysconfig/unbound

lockfile=/var/lock/subsys/unbound

start() {
    [ -x $exec ] || exit 5
    [ -f $config ] || exit 6
    echo -n $"Starting unbound: "

	if [ ! -e ${rootdir}/etc/resolv.conf ] || /usr/bin/cmp -s /etc/resolv.conf ${rootdir}/etc/resolv.conf; then
	    cp -fp /etc/resolv.conf ${rootdir}/etc/resolv.conf
	fi;
	if [ ! -e ${rootdir}/etc/localtime ] || /usr/bin/cmp -s /etc/localtime ${rootdir}/etc/localtime; then
	    cp -fp /etc/localtime ${rootdir}/etc/localtime
	fi;
	mount --bind -n /dev/log ${rootdir}/dev/log >/dev/null 2>&1;
	mount --bind -n /dev/random ${rootdir}/dev/random >/dev/null 2>&1;
	mount --bind -n /var/run/unbound ${rootdir}/var/run/unbound >/dev/null 2>&1;

    # if not running, start it up here
    daemon $exec
    retval=$?
    [ $retval -eq 0 ] && touch $lockfile
    echo
}

stop() {
    echo -n $"Stopping unbound: "
    # stop it here, often "killproc unbound"
    killproc -p $pidfile unbound
    retval=$?
    [ $retval -eq 0 ] && rm -f $lockfile
    for mountfile in /dev/log /dev/random /etc/localtime /etc/resolv.conf /var/run/unbound
    do
    if egrep -q '^/[^[:space:]]+[[:space:]]+'${rootdir}''${mountfile}'' /proc/mounts; then
	umount ${rootdir}$mountfile >/dev/null 2>&1
    fi;
    done
    echo
}

restart() {
    stop
    start
}

reload() {
    kill -HUP `cat $pidfile`
}

force_reload() {
    restart
}

rh_status() {
    # run checks to determine if the service is running or use generic status
    status -p $pidfile unbound
}

rh_status_q() {
    rh_status -p $pidfile >/dev/null 2>&1
}

case "$1" in
    start)
        start
        ;;
    stop)
        stop
        ;;
    restart)
        restart
        ;;
    reload)
        reload
        ;;
    force-reload)
        force_reload
        ;;
    status)
        rh_status
        ;;
    condrestart|try-restart)
        rh_status_q || exit 0
        restart
        ;;
    *)
        echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}"
        exit 2
esac
exit $?


--- NEW FILE unbound.spec ---
Summary: Validating, recursive, and caching DNS(SEC) resolver
Name: unbound
Version: 1.0.2
Release: 5%{?dist}
License: BSD
Url: http://www.nlnetlabs.nl/unbound/
Source: http://www.unbound.net/downloads/%{name}-%{version}.tar.gz
Source1: unbound.init
Source2: unbound.conf
Group: System Environment/Daemons
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
BuildRequires: flex, openssl-devel, ldns-devel >= 1.3.0, libevent-devel
Requires(post): chkconfig
Requires(preun): chkconfig
Requires(preun): initscripts
Requires(postun): initscripts
Requires: ldns >= 1.3.0
Requires(pre): shadow-utils
# Is this obsolete?
#Provides: caching-nameserver

%description
Unbound is a validating, recursive, and caching DNS(SEC) resolver.

The C implementation of Unbound is developed and maintained by NLnet
Labs. It is based on ideas and algorithms taken from a java prototype
developed by Verisign labs, Nominet, Kirei and ep.net.

Unbound is designed as a set of modular components, so that also
DNSSEC (secure DNS) validation and stub-resolvers (that do not run
as a server, but are linked into an application) are easily possible.

%package devel
Summary: Development package that includes the unbound header files
Group: Development/Libraries
Requires: %{name}-libs = %{version}-%{release}, openssl-devel, ldns-devel
Requires: libevent-devel

%description devel
The devel package contains the unbound library and the include files

%package libs
Summary: Libraries used by the unbound server and client applications
Group: Applications/System
Requires(post): /sbin/ldconfig
Requires(postun): /sbin/ldconfig

%description libs
Contains libraries used by the unbound server and client applications

%prep
%setup -q 

%build
%configure  --with-ldns= --with-libevent --with-pthreads --with-ssl \
            --disable-rpath --enable-debug --disable-static \
            --with-run-dir=%{_localstatedir}/lib/%{name}\
            --with-conf-file=%{_localstatedir}/lib/%{name}/unbound.conf \
            --with-pidfile=%{_localstatedir}/run/%{name}/%{name}.pid
%{__make} CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE" QUIET=no %{?_smp_mflags}

%install
rm -rf %{buildroot}
%{__make} DESTDIR=%{buildroot} install
install -d 0755 %{buildroot}%{_localstatedir}/lib/%{name}
install -d 0755 %{buildroot}%{_initrddir}
#install -m 0755 contrib/unbound.init %{buildroot}%{_initrddir}/unbound
install -m 0755 %{SOURCE1} %{buildroot}%{_initrddir}/unbound
#overwrite stock unbound.conf with our own
install -m 0755 %{SOURCE2} %{buildroot}%{_localstatedir}/lib/%{name}

# add symbolic link from /etc/unbound.conf -> /var/unbound/unbound.conf

( cd %{buildroot}%{_sysconfdir}/ ; ln -s ..%{_localstatedir}/lib/unbound/unbound.conf )
# remove static library from install (fedora packaging guidelines)
rm -rf %{buildroot}%{_libdir}/*.la

# The chroot needs /dev/log, /dev/random, /etc/resolv.conf and /etc/localtime
# but the init script uses mount --bind, so just create empty files
mkdir -p %{buildroot}%{_localstatedir}/lib/unbound/etc \
         %{buildroot}%{_localstatedir}/lib/unbound/dev 
echo "Used for mount --bind in initscript" >  %{buildroot}%{_localstatedir}/lib/unbound/etc/resolv.conf 
echo "Used for mount --bind in initscript" > %{buildroot}%{_localstatedir}/lib/unbound/etc/localtime
echo "Used for mount --bind in initscript" > %{buildroot}%{_localstatedir}/lib/unbound/dev/log 
echo "Used for mount --bind in initscript" > %{buildroot}%{_localstatedir}/lib/unbound/dev/random
mkdir -p %{buildroot}%{_localstatedir}/lib/unbound/var/run/unbound
mkdir -p %{buildroot}%{_localstatedir}/run/unbound

%clean
rm -rf ${RPM_BUILD_ROOT}

%files 
%defattr(-,root,root,-)
%doc doc/README doc/CREDITS doc/LICENSE doc/FEATURES
%attr(0755,root,root) %{_initrddir}/%{name}
# the chroot env
%attr(0755,root,root) %dir %{_localstatedir}/lib/%{name}
%attr(0755,unbound,unbound) %dir %{_localstatedir}/run/%{name}
%attr(0755,root,root) %dir %{_localstatedir}/lib/%{name}/dev
%attr(0755,root,root) %dir %{_localstatedir}/lib/%{name}/etc
%attr(0755,root,root) %dir %{_localstatedir}/lib/%{name}/var
%attr(0755,root,root) %dir %{_localstatedir}/lib/%{name}/var/run
%attr(0755,root,root) %dir %{_localstatedir}/lib/%{name}/var/run/unbound
%attr(0644,root,root) %config(noreplace) %{_sysconfdir}/unbound.conf
%attr(0644,root,root) %config(noreplace) %{_localstatedir}/lib/%{name}/unbound.conf
%attr(0644,root,root) %{_localstatedir}/lib/%{name}/dev/*
%attr(0644,root,root) %{_localstatedir}/lib/%{name}/etc/*
%{_sbindir}/*
%{_mandir}/*/*

%files devel
%defattr(-,root,root,-)
%{_libdir}/libunbound.so
%{_includedir}/unbound.h
%doc README

%files libs
%defattr(-,root,root,-)
%{_libdir}/libunbound.so.*
%doc doc/README doc/LICENSE

%pre
getent group unbound >/dev/null || groupadd -r unbound
getent passwd unbound >/dev/null || \
useradd -r -g unbound -d %{_localstatedir}/lib/%{name} -s /sbin/nologin \
-c "Unbound DNS resolver" unbound
exit 0

%post 
/sbin/chkconfig --add %{name}

%post libs -p /sbin/ldconfig


%preun
if [ $1 -eq 0 ]; then
        /sbin/service %{name} stop >/dev/null 2>&1
        /sbin/chkconfig --del %{name} 
fi

%postun 
if [ "$1" -ge "1" ]; then
  /sbin/service %{name} condrestart >/dev/null 2>&1 || :
fi

%postun libs -p /sbin/ldconfig

%changelog
* Wed Oct 22 2008 Paul Wouters <paul at xelerance.com> - 1.0.2-5
- Only call ldconfig in -libs package
- Move configure into build section
- devel subpackage should only depend on libs subpackage

* Tue Oct 21 2008 Paul Wouters <paul at xelerance.com> - 1.0.2-4
- Fix CFLAGS getting lost in build
- Don't enable interface-automatic:yes because that
  causes unbound to listen on 0.0.0.0 instead of 127.0.0.1

* Sun Oct 19 2008 Paul Wouters <paul at xelerance.com> - 1.0.2-3
- Split off unbound-libs, make build verbose 

* Thu Oct  9 2008 Paul Wouters <paul at xelerance.com> - 1.0.2-2
- FSB compliance, chroot fixes, initscript fixes

* Thu Sep 11 2008 Paul Wouters <paul at xelerance.com> - 1.0.2-1
- Upgraded to 1.0.2

* Wed Jul 16 2008 Paul Wouters <paul at xelerance.com> - 1.0.1-1
- upgraded to new release

* Wed May 21 2008 Paul Wouters <paul at xelerance.com> - 1.0.0-2
- Build against ldns-1.3.0

* Wed May 21 2008 Paul Wouters <paul at xelerance.com> - 1.0.0-1
- Split of -devel package, fixed dependancies, make rpmlint happy

* Thu Apr 25 2008 Wouter Wijngaards <wouter at nlnetlabs.nl> - 0.12
- Using parts from ports collection entry by Jaap Akkerhuis.
- Using Fedoraproject wiki guidelines.

* Wed Apr 23 2008 Wouter Wijngaards <wouter at nlnetlabs.nl> - 0.11
- Initial version.





Index: sources
===================================================================
RCS file: /cvs/extras/rpms/unbound/F-10/sources,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- sources	31 Oct 2008 16:59:08 -0000	1.1
+++ sources	1 Nov 2008 16:53:23 -0000	1.2
@@ -0,0 +1 @@
+01b08a9c0d24be981de64b6e4e25ecbe  unbound-1.0.2.tar.gz

More information about the fedora-extras-commits mailing list